About Anping Dongjie Wire Mesh Products Co. Ltd. - Wire Mesh Supplier in China

China‑based Anping Dongjie Wire Mesh Products Co. Ltd. lists nine active products across the Wire Mesh and Stainless Steel Wires categories. The catalogue includes items such as Stainless Steel Coffee Dripper, Coffee Filter, Perforated Metal Mesh, Expanded Metal Mesh, BBQ Wire Mesh (HS 7314.39), Stainless Steel Filter Element, Fan Guard, Stainless Steel Wire Mesh and Stainless Steel Wire (HS 7223.00). Materials are specified as stainless steel grades 304 or 316 and, for the BBQ mesh, optional galvanized steel, reflecting typical buyer specifications for corrosion resistance. Each product is presented with its material designation, and two items carry explicit HS codes that align with the broader 73 and 72 tariff chapters for metal products.

The supplier’s portfolio focuses on mesh products used in food‑service equipment, filtration, ventilation and construction applications. Stainless‑steel components are described by grade rather than by finish, indicating that surface treatments such as passivation or galvanisation are determined by the buyer’s requirement. The range therefore covers both standard mesh dimensions and customizable wire diameters, allowing downstream manufacturers to integrate the meshes into coffee brewing devices, air‑handling units, BBQ grills and industrial filtration systems.

Product Range and Specialties of Anping Dongjie Wire Mesh Products Co. Ltd.

The catalogue covers three principal mesh families: perforated metal mesh, expanded metal mesh and stainless‑steel wire mesh. In the industry, perforated meshes are typically offered with opening sizes from 0.5 mm to 5 mm and sheet thicknesses between 0.3 mm and 2 mm, while expanded mesh is produced by slitting and stretching sheet steel to create a diamond‑shaped pattern with tensile strengths of 250 - 450 MPa. Stainless‑steel wire mesh products are usually supplied in grades 304 (18‑20 % Cr, 8‑10 % Ni) or 316 (16‑18 % Cr, 10‑14 % Ni, 2‑3 % Mo) and are available in wire diameters from 0.2 mm to 2 mm. Coffee drippers and filter elements conform to common food‑contact standards such as FDA 21 CFR 175.105 and EU Regulation 1935/2004, with mesh openings typically 0.3 mm to 0.6 mm for optimal brew flow. Fan guards and BBQ mesh are marketed for high‑temperature environments and often require compliance with ASTM A240 for stainless‑steel plate and ASTM A193 for fasteners.

Trade and Export Information - Anping Dongjie Wire Mesh Products Co. Ltd.

China remains one of the world’s largest exporters of metal mesh, with the majority of shipments destined for North America, Europe and Southeast Asia. HS 7314.39 (other stainless‑steel products) and HS 7223.00 (stainless‑steel wire) are classified under Chapter 73 and Chapter 72 respectively, and are subject to standard customs valuation and anti‑dumping investigations in major markets. Typical importers include manufacturers of coffee equipment, HVAC systems, automotive filtration, and construction hardware. Buyers frequently request ISO 9001 quality‑management certification, CE marking for EU market entry, and SGS or Intertek inspection reports confirming material composition and mechanical properties. Shipments are commonly packed on wooden pallets, shrink‑wrapped, and loaded in 20‑ft or 40‑ft containers under FOB or CIF terms, with freight forwarding handled by major Chinese ports such as Shanghai or Shenzhen.

Sourcing from Anping Dongjie Wire Mesh Products Co. Ltd. - Buyer Guidance

When sourcing from this supplier, request a mill test report (MTR) that verifies the stainless‑steel grade, tensile strength and chemical composition for each mesh product. Verify the mesh opening size, wire diameter and sheet thickness against the specifications required for your end‑use, and confirm whether the buyer needs a passivated finish or an additional galvanised coating. Ask for ISO 9001 certification and any third‑party inspection certificates (e.g., SGS, Bureau Veritas) that cover the production batch, as these documents are standard for metal‑mesh imports. Typical minimum order quantities range from 500 pcs for specialized coffee‑dripper meshes to 5 tons for bulk wire mesh, with lead times of 30‑45 days after order confirmation and receipt of a pro‑forma invoice.

What material grades are offered for the stainless‑steel wire mesh?

The supplier lists stainless‑steel grades 304 and 316 for wire mesh and wire products, which are the common grades used for corrosion‑resistant applications.

Are HS codes provided for all products?

HS codes are supplied for the BBQ Wire Mesh (7314.39) and the Stainless Steel Wire (7223.00). Other items are classified under the same tariff chapters but the catalogue does not list specific codes.

Which certifications should a buyer request?

Buyers should request ISO 9001 quality‑management certification and, for food‑contact items such as coffee drippers, compliance documents like FDA 21 CFR 175.105 or EU Regulation 1935/2004. Third‑party inspection reports (SGS, Intertek) are also standard.

What are typical packaging and shipping options?

Products are usually shrink‑wrapped on pallets and shipped in 20‑ft or 40‑ft containers. Common Incoterms are FOB Shanghai or CIF destination port, depending on the buyer’s logistics preference.

What is the usual minimum order quantity?

MOQ varies by product; small‑batch items such as coffee drippers may start at 500 pieces, while bulk mesh sheets typically require orders of 5 tons or more.

How long does production take after order confirmation?

Lead times are generally 30 to 45 days, covering material preparation, mesh forming, quality inspection and packaging before dispatch.