About An Ping Hebei Jinshanglian Metals & Wire Meshes Co., Ltd - Wire Mesh Supplier in China

China‑based An Ping Hebei Jinshanglian Metals & Wire Meshes Co., Ltd lists five active wire mesh products in its catalogue. The items include expanded plate mesh, square wire mesh, PVC‑coated wire mesh, galvanized welded mesh and Holland wire mesh, each classified under the broader wire mesh category. The supplier’s catalogue does not provide additional technical parameters, but the product titles indicate a focus on metallic meshes with various surface treatments and structural forms.

The five products represent typical variants used in construction, filtration, and industrial safety applications. Expanded plate mesh is often supplied as a perforated steel sheet, while square wire mesh refers to a grid of intersecting wires of uniform spacing. PVC coating adds corrosion resistance, and galvanised welding provides enhanced durability for outdoor or high‑temperature environments. Holland wire mesh generally denotes a specific weave pattern used in reinforcement and support structures. All items fall under the wire mesh product family commonly identified in trade data under HS Chapter 73 for metal products.

Product Range and Specialties of An Ping Hebei Jinshanglian Metals & Wire Meshes Co., Ltd

The catalogue’s five entries cover both plain and coated steel meshes. In the wire mesh market, standard grades are defined by wire diameter (typically 0.5 mm to 5 mm), mesh opening size (ranging from 5 mm to 100 mm), and material type such as carbon steel, stainless steel or alloy steel. Coatings like PVC or zinc galvanisation are applied to meet corrosion‑resistance specifications required by sectors such as construction, agriculture and water treatment. Typical industry standards include ASTM A123 for zinc coating, ASTM A555 for welded wire mesh, and ISO 10874 for mesh dimensional tolerances. Buyers often request product data sheets that list tensile strength (e.g., 300 - 500 MPa for carbon steel mesh) and elongation percentages.

Expanded plate mesh is usually produced by perforating rolled steel plates to a defined aperture pattern, with thicknesses from 2 mm to 10 mm. Square wire mesh is fabricated from rolled wire rods, welded or woven, and is measured by the number of wires per inch (e.g., 10 × 10 or 12 × 12). PVC‑coated variants meet UL 796 fire‑rating criteria when required, while galvanized welded mesh conforms to corrosion‑resistance standards for outdoor installations. Holland mesh, a term used for a specific double‑weave structure, often targets load‑bearing applications where mesh strength and stability are critical.

Trade and Export Information - An Ping Hebei Jinshanglian Metals & Wire Meshes Co., Ltd

China is a major exporter of wire mesh products, supplying markets in Southeast Asia, the Middle East, Europe and North America. Export shipments are typically packed in standard wooden pallets or bulk containers, with dimensions of 20 ft or 40 ft containers accommodating 1 200 kg to 2 400 kg of mesh depending on packaging density. Common Incoterms used by Chinese wire mesh exporters include FOB (Port of Tianjin or Shanghai) and CIF for regional buyers. Importing countries frequently require material certificates, test reports for tensile strength, and coating thickness verification, especially for PVC‑coated or galvanised products. Buyers often request compliance with standards such as CE marking for the European market or ASTM specifications for the United States. The supplier’s target markets are not listed, so sourcing parties should confirm the intended destination and any regional certification requirements before finalising contracts.

buyer:[

Sourcing from An Ping Hebei Jinshanglian Metals & Wire Meshes Co., Ltd - Buyer Guidance

When sourcing wire mesh from this supplier, request a detailed product data sheet that specifies wire gauge, mesh opening dimensions, material composition and coating thickness. Verify that any PVC‑coated or galvanised items are accompanied by a coating certification (e.g., zinc weight per square metre) and a tensile‑strength test report aligned with ASTM or ISO standards. Ask for a sample batch to assess weld quality, dimensional accuracy and surface finish before committing to larger volumes.

Confirm the packaging method - whether the meshes are rolled, flat‑packed or crated - and ensure that the packaging complies with the buyer’s handling and transport requirements. For large orders, request a pre‑shipment inspection report (e.g., SGS or Bureau Veritas) that covers material conformity, dimensions and coating integrity. Clarify the Incoterm and arrange for a bill of lading that clearly states the HS‑chapter (73) classification to avoid customs delays.

What types of wire mesh are listed in the supplier’s catalogue?

The catalogue lists expanded plate mesh, square wire mesh, PVC‑coated wire mesh, galvanized welded mesh and Holland wire mesh, all under the wire mesh product family.

How many distinct wire mesh products does the supplier currently offer?

The supplier’s active product count is five distinct wire mesh items.

Which coatings are mentioned for the wire mesh products?

PVC coating is mentioned for the PVC‑coated wire mesh and zinc galvanisation for the galvanized welded mesh.

What typical specifications should a buyer verify for these meshes?

Buyers should verify wire diameter, mesh opening size, material grade (e.g., carbon steel), coating thickness, tensile strength and compliance with standards such as ASTM A123 or ISO 10874.

Are there any standard certifications commonly required for wire mesh imports?

Importers usually require material certificates, coating test reports and compliance with ASTM, ISO or CE standards, depending on the destination market.

What packaging formats are typical for shipping wire mesh from China?

Wire mesh is commonly shipped in wooden pallets, bulk rolls or flat‑packed crates, loaded into 20 ft or 40 ft containers.

Which Incoterms are frequently used for Chinese wire mesh exports?

FOB from major Chinese ports (e.g., Tianjin, Shanghai) and CIF for regional buyers are the most frequently used Incoterms.

What documentation should a buyer request before placing an order?

Request a product data sheet, material and coating certificates, tensile‑strength test report, and optionally a pre‑shipment inspection report from a recognized third‑party agency.