About Altra Inc. - Mechanical & Metal Components Supplier in India

India is the origin country of Altra Inc., which currently lists ten active products in its B2B catalogue. The portfolio spans hardware such as Grating Clips (HS 7326.90) and Y Anchors (HS 7316.00), polymer‑based FRP Gratings (HS 3925.90), and a range of mechanical components including Timing Pulley, Worm Gear, Worm Shaft (HS 8483.40), Sheet Metal Component (HS 7326.90), Precision Parts (HS 8483.40), Machinery Parts (HS 8501.40) and Cams. Each entry includes the primary HS code and material specification as supplied. The supplier’s top‑level categories cover Clips, Tin, Anchors, Tools & Instruments, Automobile Gears, Shafts & Clutches, Electronic Actuators, Sheet Metal Components, and CNC Machines & Spare Parts.

The listed products use materials such as mild steel, various stainless steel grades (304, 304L, 309, 316), alloy steels 8620/4140, aluminum 6061‑T6, brass, and E‑Glass FRP resin systems. The catalogue does not provide quantitative capacities, but the inclusion of both metal and polymer components indicates capability to source or fabricate parts for industrial, automotive and electrical applications. The HS codes place the items within the metal hardware (Chapter 73) and plastics (Chapter 39) sections of the Harmonized System, which are common for export of fittings and composite gratings. No additional certifications are recorded for Altra Inc.

Product Range and Specialties of Altra Inc.

Altra Inc.’s catalogue lists Grating Clips in mild steel, stainless steel 304, stainless steel 316 and powder‑coated steel. In the metal‑hardware sector such clips are commonly produced to ASTM A108 for carbon steel and ASTM A240 for stainless steel, with powder‑coated finishes often verified against ISO 12944 for corrosion resistance. FRP Gratings are described as E‑Glass fiber reinforced thermosetting resin; industry practice aligns these with EN 14607, which defines load‑bearing capacity and fire‑performance for composite walkways. Y Anchors are offered in stainless steel grades 304, 304L and 309; typical specifications include tensile strength above 520 MPa and corrosion‑resistant performance measured by ASTM B117 salt‑spray testing. Timing Pulleys, Worm Gears and Worm Shafts fall under the mechanical‑transmission category where gear tooth profile, module and surface hardness (often 55‑60 HRC after case hardening of 8620 or 4140 steel) are critical. Sheet Metal Components and Precision Parts combine mild steel, stainless steel 304, brass, aluminum 6061‑T6 and carbon steel 1045; tolerances of ±0.05 mm and surface finish Ra 0.8 µm are typical for such fabricated parts. Machinery Parts listed with steel housing, copper windings, neodymium magnets and polymer components correspond to standard electrical‑machine design guidelines such as IEC 60034 for rotating equipment.

The product mix reflects a focus on medium‑scale industrial applications. Buyers normally request mill‑test reports for steel grades, polymer composition certificates for FRP, and dimensional inspection reports for gears and cams. Standard packaging for metal hardware includes double‑wall corrugated pallets with shrink‑wrap, while FRP gratings are often crated with edge protection to avoid impact damage. Shipping containers of 20 ft or 40 ft are typical for the volume ranges of these components, with HS‑code‑specific customs documentation required for each shipment.

Trade and Export Information - Altra Inc.

India is a major exporter of metal hardware, automotive components and composite gratings, with Europe, the United States, the Middle East and Southeast Asia representing the largest import regions for these categories. HS chapter 73 items such as Grating Clips (7326.90) and Sheet Metal Components are routinely subject to inspection under the Indian Export Inspection Council (IEIC) and may require a Certificate of Origin for preferential trade agreements. FRP Gratings (3925.90) are classified under plastics and often need compliance with REACH or EU‑specific safety data sheets when destined for the European market. Mechanical transmission parts (HS 8483.40) and electrical machinery parts (HS 8501.40) typically require conformity to ISO 9001 quality‑management systems and, for certain destination markets, CE marking or UL listing. Buyers usually arrange CIF or FOB terms, with container loading optimized to the HS‑code weight and volume limits; standard freight for a 40 ft container of mixed metal parts ranges between 18 000 kg and 22 000 kg.

Sourcing from Altra Inc. - Buyer Guidance

When sourcing from Altra Inc., purchasers should request material test certificates that confirm the exact steel grade, alloy composition and heat‑treatment condition for each metal part. For FRP Gratings a resin data sheet and glass‑fiber weight percentage should be obtained, together with a load‑rating test report that meets EN 14607. Mill‑test reports for alloy steels 8620 and 4140, as well as hardness certificates for case‑hardened shafts, are standard documents that help verify compliance with mechanical specifications. Buyers are advised to verify that the supplier can provide ISO 9001 certification or equivalent quality‑system documentation, and to confirm packaging details such as pallet dimensions, shrink‑wrap grade and any moisture‑barrier requirements before finalising the order.

What material grades are available for the Grating Clips listed by Altra Inc.?

The catalogue specifies mild steel, stainless steel 304, stainless steel 316 and powder‑coated steel. Buyers can request the corresponding mill‑test reports to confirm chemical composition and mechanical properties.

Which HS code applies to the FRP Gratings and what does it imply for customs clearance?

FRP Gratings are assigned HS 3925.90, the chapter for other plastic articles. This code typically requires a product description, material composition statement and, for EU destinations, a REACH safety data sheet.

Are there standard certifications that buyers should expect for the Worm Shaft (HS 8483.40)?

While Altra Inc. does not list certifications, buyers normally ask for ISO 9001 quality‑system certification and a hardness test report (typically 55‑60 HRC) for alloy steel 8620 or 4140 shafts.

What is the typical minimum order quantity (MOQ) for Sheet Metal Components?

MOQs vary by size and thickness, but suppliers in this segment often set a baseline of 100 kg or one full pallet (≈1 m³) to optimise container loading.

What lead time can be expected for a batch of Precision Parts made from aluminum 6061‑T6?

Lead times for CNC‑machined aluminum parts usually range from 2 to 4 weeks after design approval and receipt of material certification.

How are the products typically packaged for international shipment?

Metal components are usually packed on double‑wall pallets, wrapped in shrink‑film and secured with strapping; FRP Gratings are crated with edge protectors and may be wrapped in moisture‑resistant film.

Which markets most commonly import the types of products Altra Inc. offers?

European industrial manufacturers, North American automotive suppliers, Middle‑East construction firms and Southeast Asian infrastructure projects are the primary import markets for Indian metal hardware and composite gratings.

What documentation should a buyer request before paying for the Machinery Parts (HS 8501.40)?

A buyer should ask for a mill‑test report for the steel housing, a winding resistance test for the copper coils, a magnet grade certificate for the neodymium magnets, and any relevant IEC 60034 compliance documentation.