About Agility Engineering Tech Co Ltd - Industrial Components Supplier in Thailand

Agility Engineering Tech Co Ltd is based in Thailand and currently lists 24 active products across its catalogue. The company’s catalogue covers machined components, plastic items, gaskets, CNC machine spare parts, rubber and related items, industrial safety products, copper and aluminum materials. Product entries include rubber boots and bellows, rubber shock absorbers, various gear types such as parallel and rack‑and‑pinion gears, and pulleys. The listed copper and copper alloy items fall under HS code 7403.11 and the aluminum alloy items under HS code 7604.29. All items are presented with material specifications where available.

The rubber product line features items such as flexible couplings and custom‑molded components, while the gasket range includes sheet gaskets, spiral wound gaskets and sealing solutions. Gear offerings span external, internal, intersecting, non‑intersecting and transmission gears, as as well as rack‑and‑pinion sets. Pulley selections include multi‑V groove and taper‑lock V‑groove designs. The copper portfolio mentions electrolytic copper (99.9 % purity) and copper‑zinc alloys, and the aluminum portfolio specifies 6xxx series alloys with defined Si and Mg content. Each catalogue entry aligns with the corresponding HS code family for classification.

Product Range and Specialties of Agility Engineering Tech Co Ltd

The catalogue lists 24 distinct items ranging from rubber boots, shock absorbers and custom rubber parts to metal components such as sheet gaskets, spiral wound gaskets, a full series of gear types and pulleys. In the metal segment, copper products are identified as electrolytic copper (99.9 % Cu) and copper‑zinc alloys (CuZn30), while aluminum is described as 6xxx series alloy (Si 0.4‑1.4 %, Mg 0.6‑1.2 %). Typical industry grades for these categories include NBR or EPDM for rubber boots, ISO 3601 for spiral wound gaskets, and steel grades 20 Cr2 or 41 Cr4 for gears with hardness 45‑55 HRC. Plastic items are commonly supplied in polypropylene (PP) or polyethylene (PE) grades meeting ASTM D4100 standards. CNC‑machined spare parts usually adhere to tolerance classes ±0.02 mm and surface roughness Ra ≤ 0.8 µm.

Buyers in the industrial sector often request material test reports that confirm the chemical composition of copper (e.g., ASTM B170) and aluminum alloys (e.g., ASTM B221). Gasket performance is frequently validated against pressure ratings of 10 MPa for spiral wound types and temperature ranges from - 40 °C to +200 °C for sheet gaskets. Gear specifications commonly include module (M) values from 1.0 to 5.0, helix angles up to 25°, and surface hardness measured in HRC. Pulley dimensions are expressed in bore diameter, groove width and V‑angle, with standard V‑groove angles of 40° or 60°. These industry benchmarks help align the supplier’s offerings with typical buyer expectations.

Trade and Export Information - Agility Engineering Tech Co Ltd

Thailand is a leading regional exporter of engineered metal components, copper and aluminum alloys, and rubber industrial goods. Export shipments of HS chapter 74 (copper) and HS chapter 76 (aluminum) from Thailand are primarily destined for the United States, European Union, Japan and neighboring ASEAN markets, while rubber and gasket products (HS chapters 40 and 84) are commonly shipped to automotive and machinery manufacturers in Europe and North America. Buyers usually require compliance with ISO 9001 quality management, CE marking for EU market entry, and RoHS/REACH conformity for products that may contain hazardous substances. Standard export packaging includes 20‑ft or 40‑ft containers with wooden crates for gear and pulley sets, and bulk pallets for copper coils or aluminum extrusions. Incoterms such as FOB Bangkok or CIF Shanghai are typical for these categories, and customs clearance often involves verification of HS codes 7403, 7604, 8483 and 8487 along with material certificates.

Sourcing from Agility Engineering Tech Co Ltd - Buyer Guidance

When sourcing from this supplier, buyers should request mill test certificates that verify copper purity (≥99.9 %) and aluminum alloy composition (Si and Mg limits) in accordance with ASTM standards. For rubber and gasket items, a sample batch should be examined for hardness (Shore A), compression set and temperature resistance, and a chemical resistance test report should be obtained if the product will contact oils or solvents. Gear and pulley orders usually require a detailed drawing with dimensions, tolerance specifications and surface finish requirements; confirming that the supplier can meet a tolerance of ±0.02 mm and hardness of 45‑55 HRC is advisable. Buyers are encouraged to verify that the supplier can provide ISO 9001 certification, CE documentation where applicable, and any additional testing reports required by the destination market before finalizing the purchase.

What material standards apply to the copper products listed under HS code 7403.11?

Copper items are described as electrolytic copper (99.9 % Cu) and copper‑zinc alloy CuZn30. Buyers typically request ASTM B170 mill test certificates confirming purity and alloy composition.

Which aluminum alloy grade is offered and what certification should I ask for?

The aluminum is specified as 6xxx series alloy with silicon 0.4‑1.4 % and magnesium 0.6‑1.2 %. A buyer should request an ASTM B221 extrusion test report and a material certificate.

What are the typical specifications for the gear products such as parallel and rack‑and‑pinion gears?

Industrial gears are usually supplied in steel grades 20 Cr2 or 41 Cr4, with module values from 1.0 to 5.0, helix angles up to 25°, and hardness between 45‑55 HRC. Tolerance classes of ±0.02 mm are common.

How are rubber boots and custom rubber items evaluated for quality?

Rubber components are commonly tested for Shore A hardness, compression set, and temperature resistance (‑40 °C to +200 °C). A buyer should ask for a sample test report that includes these parameters.

What documentation is required for the gasket and sealing products?

Gasket buyers usually request ISO 3601 compliance for spiral wound gaskets, pressure rating data (up to 10 MPa), and a material safety data sheet that lists temperature limits.

What packaging and shipping formats are used for the pulleys and gear sets?

Standard packaging includes wooden crates or bulk pallets fitted inside 20‑ft or 40‑ft containers. Pulley sets are often secured with foam inserts to prevent deformation during transit.

Which certifications are typically expected for industrial safety products exported from Thailand?

Exporters of safety equipment generally need ISO 9001 quality management certification and, for EU markets, CE marking that demonstrates compliance with relevant directives such as the Machinery Directive.

What Incoterms are commonly used for shipments of these industrial components?

Typical Incoterms include FOB Bangkok for bulk metal shipments and CIF Shanghai for finished machined parts, allowing the buyer to manage freight and insurance according to their preferences.