Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

G‑Fine Ultrafine Cement Additive is a supplementary cementitious material designed as an ultrafine pozzolanic filler. It is sourced from Europe and supplied by Guru Corporation in India. The additive is intended for dosage levels of 5 % to 15 % of ordinary Portland cement by weight. Within this range it improves concrete slump without raising water demand.
The product contains a high proportion of glass particles and low‑calcium silicates, achieved through controlled granulation. Typical particle size is below 10 µm and specific surface area ranges from 500 to 800 m² kg⁻¹, which is comparable to silica fume. Such fineness enables dense packing of cementitious phases, reducing void content and permeability. Industry practice marks these characteristics as typical for high‑performance concrete additives.
G‑Fine is used in high‑performance concrete, ready‑mix, precast and mass concrete structures where pumpability and rapid strength gain are required. It is packaged in bulk jumbo bags with a plastic inner liner and also in 25 kg plastic‑lined bags for smaller orders. The additive must be stored in a dry, contamination‑free environment; under proper conditions it retains an indefinite shelf life. Buyers should confirm minimum order quantities, incoterms and lead‑time directly with Guru Corporation before placing an order.
| Material | Supplementary Cementitious Material (SCM) - Ultrafine Pozzolanic Filler |
| Recommended dosage | 5 % - 15 % of ordinary Portland cement by weight |
| Particle size (typical) | <10 µm (typical) |
| Specific surface area (typical) | 500 - 800 m² kg⁻¹ (typical) |
| Glass content (typical) | >70 % (typical) |
| Calcium silicate composition (typical) | Low calcium silicates (typical) |
| Packaging | Bulk jumbo bags with plastic inner liner; 25 kg plastic‑lined bags |
| Storage requirement | Dry, moisture‑free environment; indefinite shelf life if stored properly |
| Water demand impact | No increase in water demand at recommended dosage |
| Performance benefits | Improved workability, reduced permeability, enhanced durability |
Guru Corporation is located at B‑906, Infinity Tower, Corporate Road, Ahmedabad 380015, Gujarat, India. It is classified as an imported‑tier supplier with a harbor trust tier. The company’s response metrics show a 0 % response rate and no recorded response time, indicating that inquiries should be followed up promptly. Guru Corporation markets G‑Fine as a European‑sourced additive and supplies it to construction projects worldwide.
The supplier states that G‑Fine is produced by controlled granulation of low‑calcium silicate raw materials, resulting in a high‑glass, high‑reactivity filler. While the profile does not disclose production capacity or client list, it confirms that the product is available in bulk and 25 kg bags and can be stored in silos or warehouses. Potential buyers are advised to request technical data sheets and sample quantities to verify suitability.
G-Fine is a new generation European-sourced supplementary cementitious material designed as an ultrafine filler and performance enhancer for cement and concrete applications. This micro-fine additive improves workability, reduces permeability, and enhances durability while enabling partial cement replacement to lower production costs. Widely used in high-performance concrete, ready-mix, and precast applications, G-Fine is traded globally as a cost-effective industrial additive for construction projects requiring superior strength and longevity.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | Contact Supplier |
| Response Rate | New Supplier |
Before placing an order, importers should obtain the material safety data sheet and any test certificates that verify particle size and specific surface area. Request a sample batch to evaluate workability improvements in a trial mix, and ask the supplier to confirm the minimum order quantity and the exact incoterm they will use for shipment from India. Clarifying these points reduces the risk of mismatched specifications.
Logistics for G‑Fine typically involve containerised transport from the supplier’s facility in Ahmedabad to the destination port. Although the supplier does not publish lead‑time, buyers should ask for the estimated production schedule and the preferred Incoterm, such as FOB or CIF. Payment terms are not disclosed in the listing, so confirming whether a letter of credit, advance payment or open account is required is essential before finalising the contract.
Upon arrival, conduct a third‑party laboratory analysis to confirm particle size distribution and glass content against the typical values provided. A compressive strength test on a concrete cube containing the received batch will verify the claimed durability benefits. Ensure that the shipment includes a certificate of conformity and retain all inspection reports for customs clearance and future quality audits.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing G-Fine Ultrafine Cement Additive for your business, securing the right balance of quality and cost is essential. Guru Corporation, a verified supplier based in India, offers this product with key specifications including Micro Fine / Ultrafine Supplementary Cementitious Material (SCM), High-purity ultrafine mineral filler with pozzolanic properties, Silicon Dioxide (SiO2) based, and Ultrafine particles, typically < 10 microns (D90). By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $350/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is actively traded under HS Code 3824.99, making it a staple in the Cement sector with strong demand from importing countries worldwide.
Importing G-Fine Ultrafine Cement A requires careful attention to shipping logistics, customs compliance, and secure payment terms. Guru Corporation offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 3824.99 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading import export marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this G-Fine Ultrafine Cement A has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Cement category and connect with top-tier exporters on our comprehensive online B2B marketplace. Start your sourcing journey today.
Importing G-Fine Ultrafine Cement A requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 3824.99 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for G-Fine Ultrafine Cement Additive from Guru Corporation is $350/Bags on FOB terms from India. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Guru Corporation through EximNext.
The supplier, Guru Corporation, has set a Minimum Order Quantity (MOQ) of 1 Bags for G-Fine Ultrafine Cement A. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
For international shipping and customs clearance, G-Fine Ultrafine Cement Additive is classified under HS Code 3824.99. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
To import G-Fine Ultrafine Cement A from India, negotiate shipping terms (FOB, CIF, or EXW) directly with Guru Corporation. Ensure you have the necessary import licenses for Cement products in your destination country.
Yes, Guru Corporation is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
The key specifications for G-Fine Ultrafine Cement Additive supplied by Guru Corporation include Micro Fine / Ultrafine Supplementary Cementitious Material (SCM), High-purity ultrafine mineral filler with pozzolanic properties, Silicon Dioxide (SiO2) based, and Ultrafine particles, typically < 10 microns (D90). For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
Guru Corporation offers G-Fine Ultrafine Cement A with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
G-Fine Ultrafine Cement A is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Guru Corporation through our platform.
Guru Corporation maintains international quality certifications. These ensure that the G-Fine Ultrafine Cement A meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Guru Corporation will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Guru Corporation.
Discover more products in Cement from verified suppliers worldwide.