EPGC306 G11 Epoxy Resin Laminated Plate

The EPGC306 G11 epoxy resin laminated plate is supplied by Ztelec Group in China. It is delivered as a sheet with thickness ranging from 0.1 mm up to 80 mm, allowing selection for thin dielectric layers or thick structural parts. Standard sheet dimensions are 1020 mm × 1220 mm, and the plates are available in green, yellow or black colour. Thicker sheets and custom cutting services can be arranged on request.

G11 laminates are produced from an alkali‑free glass fibre cloth that is fully impregnated with a heat‑resistant epoxy resin under pressure and heat, giving the material high mechanical strength at medium humidity and stable dielectric properties at high humidity. The fire‑resistant nature of the epoxy matrix meets typical UL94 V‑0 requirements, and the board can be machined or die‑cut with standard tooling. Compared with G10, G11 offers slightly lower moisture absorption, usually below 0.1 %, which helps retain insulating performance in moist environments. Typical dielectric strength for G‑type epoxy laminates is around 30 kV/mm, and the glass transition temperature is about 150 °C.

Typical customers are manufacturers of appliance lines, switchgear, computer electronics, industrial laminates and mechanical components that require a combination of strength and insulation. Ztelec Group lists the product as ready for bulk supply, but exact minimum order quantities, lead‑time estimates and payment conditions must be verified with the supplier. Prospective importers should request material test certificates and, if needed, arrange a pre‑shipment sample inspection.

Ztelec Group operates from Zhengzhou, Henan Province, China, located at No.279 Third West Ring, postal code 450000. The marketplace records the company with a harbour‑level trust tier and a 0 % response rate, indicating limited recent communication activity. No detailed audit of production facilities is provided, so buyers should request additional verification if needed. The supplier’s product range includes epoxy‑based laminates such as the G11 plate and other electrical insulation boards.

The company mentions that it can supply custom thicknesses beyond the standard range and offers on‑demand material cutting. No explicit certifications, employee numbers or annual turnover are disclosed in the listing. Prospective buyers are advised to obtain quality management documentation and material test reports before committing to large orders. Direct dialogue with Ztelec Group is required to confirm lead‑time, MOQ and payment terms.