Import Broad Spectrum Bactericide And Preservative — Buy in wholesale FOB from Supplier in China

HICIDE MC from Jubilee Coast International Company Limited is an isothiazolinone-based broad-spectrum bactericide and preservative formulated with a CMIT/MIT ratio of 1:5 in a univalent stabilization system. The product appears as a colourless to yellow transparent liquid with a slight characteristic odour, exhibiting a pH of 3.5 plus or minus 1 at 25 degrees Celsius and a density of 1.03 plus or minus 0.03 g per ml at 20 degrees Celsius. Its active system is designed to prevent flocculation, a common failure mode in stabilised biocide formulations, making it suitable for water-based and low molecular alcohol systems. The recommended dosage ranges from 1 to 3 kg per tonne, with upward adjustment required in protein-rich, casein-containing, or other high-nutrition matrices where microbial challenge intensifies.

The CMIT/MIT combination (5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one) is one of the most widely documented industrial preservative chemistries, though it is also among the most sensitising and is subject to stringent regulatory caps in the EU and other markets. The univalent stabilization system referenced by the supplier distinguishes this formulation from simpler salt-stabilised alternatives, potentially extending compatibility with anionic surfactants and polymeric thickeners. The product shows no foaming under DIN 53902 test conditions and is fully water miscible, with a boiling point of 100 degrees Celsius and negligible vapour pressure below 0.001 hPa at 20 degrees Celsius. These physical properties support incorporation at ambient temperatures without significant volatility concerns under normal industrial handling.

Application areas span water-based coatings, polymer emulsions, adhesives, personal care formulations, and protein-rich industrial systems where standard preservative loads prove inadequate. The supplier recommends adding one-third initially in water or incorporating at the end of production, a protocol that minimises premature degradation from process heat or oxidising conditions. Buyers should conduct laboratory testing to establish the lowest effective dose for their specific formulation, as over-dosing escalates both cost and regulatory burden without proportional benefit. Import considerations include EU CLP regulation compliance and EC labelling requirements, which the supplier notes as applicable, though buyers must independently verify current registration status and permissible concentration limits in their target markets.

Jubilee Coast International Company Limited is located at Lane 599, Number 7 Chengfeng Road, Shanghai 201200, China, positioning it within China's principal chemical and pharmaceutical manufacturing corridor. The supplier holds a harbor trust tier, indicating basic business registration without advanced third-party verification of production facilities or quality systems. The response rate is recorded at 0.00 percent with zero average response hours, which suggests the profile may be newly established, temporarily inactive, or managing enquiries through alternative channels not captured in platform metrics. No information regarding factory ownership, GMP certification, ISO standards, or annual production volume is available in the source data.

The company specialises in industrial biocides and preservatives, with this listing representing a single product within the HICIDE brand range. Shanghai-based chemical traders often operate through manufacturing partnerships rather than owned production, so buyers should clarify whether Jubilee Coast formulates in-house or sources from a toll manufacturer. Given the sensitising nature of CMIT/MIT and the regulatory complexity of EU biocide regulation (BPR), importers should request full formulation disclosure, safety data sheets compliant with REACH and CLP, and evidence of active substance supplier authorisation before committing to volume orders.