Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

Paras Traders supplies forged beam clamps in carbon steel Grade 8.8 and stainless steel 304, designed for rapid attachment of strut channels to I-beams and structural channels without welding or drilling. These clamps serve as load-bearing anchors in power generation, petrochemical processing, and heavy civil infrastructure where installation speed and structural integrity are critical. The Grade 8.8 carbon steel variant provides tensile strength of 800 MPa with yield at 640 MPa minimum, while 304 stainless offers austenitic corrosion resistance for aggressive environments.
The load ratings for this product category typically span 450 kg to 5,000 kg depending on beam flange geometry, clamp jaw configuration, and material grade. Grade 8.8 carbon steel clamps are suited to dry industrial environments with hot-dip galvanizing or zinc plating as supplementary protection. Stainless steel 304 clamps resist chloride-induced corrosion and are specified for offshore platforms, chemical processing areas, and coastal construction where carbon steel would require frequent maintenance or replacement.
Buyers for this product segment include EPC contractors for power and petrochemical projects, structural steel fabricators, and MEP installation specialists. The forged construction method, as distinct from cast or fabricated plate designs, delivers grain alignment that improves fatigue resistance under cyclic loading. International procurement typically requires compliance with ASTM A325 or A490 for high-strength structural bolting, or equivalent metric standards, with finish specifications negotiated per project environmental conditions.
| Primary Material Grades | Carbon steel Grade 8.8; Stainless steel 304 (AISI 304, 1.4301) |
| Manufacturing Method | Forged (drop-forged or press-forged, typical for structural hardware) |
| Typical Working Load Range | 450 kg to 5,000 kg (varies with jaw size and material grade) |
| Carbon Steel Mechanical Properties | Tensile strength 800 MPa minimum, yield strength 640 MPa minimum (standard for Grade 8.8 per ISO 898-1) |
| Stainless Steel 304 Composition | 18% chromium, 8% nickel, 0.08% carbon maximum (standard austenitic grade) |
| Attachment Compatibility | I-beams, structural channels, and strut channel systems (typical flange width 75 mm to 300 mm) |
| Intended Service Environments | Power plants, petrochemical facilities, heavy construction (standard industrial applications) |
| Hot-dip galvanizing or zinc plating (specify per environment; not stated in listing) | |
| Thread Standard | Metric coarse pitch, typical M12 to M24 for load-rated structural clamps |
| Design Standard Reference | ASTM A325/A490 (high-strength structural bolts, typical reference for load-rated hardware) |
Paras Traders operates from Head Office at 1801, 1st Floor, Nav Durga Market, Bhagirath Palace, Delhi 110006, a well-known trading hub for electrical and hardware goods in central Delhi. The supplier holds a harbor trust tier with no recorded response rate or average response time, indicating limited platform engagement history. Buyers should initiate direct contact early in the procurement cycle to assess communication reliability and technical competence.
The company positions itself as a supplier to power plant and major construction projects, though no specific project references, manufacturing partnerships, or inventory capacity are disclosed. The forged beam clamp focus and dual-material offering suggest access to foundry or forging subcontractor networks rather than in-house manufacturing. No quality certifications, financial data, or export experience details are provided; buyers should request evidence of past performance and supplier qualification documentation.
Beam clamps are essential forged hardware devices designed to attach strut channels or support structures to I-beams and channels in industrial and construction environments. Widely deployed in power plants, petrochemical facilities, and major infrastructure projects, these clamps provide reliable load-bearing attachment without welding or drilling. Available in carbon steel or stainless steel grades with load ratings typically ranging from 450 kg to 5,000 kg, they offer rapid installation that saves significant labor time on site. For international buyers sourcing these components, verify compliance with ASTM or equivalent standards and confirm finish specifications such as hot-dip galvanizing for corrosive environments.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Prior to contracting with Paras Traders, buyers should verify the supplier's technical capability to support forged hardware specifications. Request physical samples of both Grade 8.8 carbon steel and 304 stainless variants for independent metallurgical testing, including spectrographic analysis for material grade confirmation and hardness testing to verify heat treatment. Confirm the supplier's understanding of project-specific standards, whether ASTM, EN, or ISO-based, and their capacity to provide accompanying documentation such as material certificates and inspection reports.
Shipping from Delhi to international destinations typically routes through Nhava Sheva Port (Mumbai) or Mundra Port on the west coast, or through Chennai on the east coast depending on final destination. Clarify whether the supplier ex-works Delhi or can arrange transport to port. Incoterms should be negotiated with attention to inland freight responsibility, with FCA Delhi or FOB Mumbai as common starting points. Payment structures for hardware traders in India often require advance payment for initial orders; consider using an escrow service or documentary credit for significant first transactions given the absence of verified transaction history.
Receiving inspection should prioritise dimensional verification against the agreed drawing, particularly jaw opening and throat depth, using calibrated gauges. For Grade 8.8 carbon steel clamps, perform Rockwell hardness testing (target HRC 22-32 for quenched and tempered Grade 8.8) and magnetic particle inspection for surface cracks in forged areas. For 304 stainless clamps purchased for corrosive service, verify material grade with PMI (positive material identification) and inspect passivation layer integrity. Retain test samples from each batch for potential failure analysis, and establish with the supplier a clear warranty and replacement protocol for non-conforming material.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing Beam Clamp for your business, securing the right balance of quality and cost is essential. Paras Traders, a verified supplier based in India, offers this product with key specifications including Grade 8.8 Carbon Steel or SS 304, Type F (Flange Beam Clamp), Carbon Steel: C 0.25-0.55%, Mn 0.60-1.65%, S max 0.05%; Stainless Steel: Cr 18%, Ni 8%, and Flange Range: 75mm - 305mm; Compatible with W6x9 to W36x150 I-beam series; Thread Size: M10 to M27. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $2.506/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is actively traded under HS Code 7308.90, making it a staple in the Clamps sector with strong demand from importing countries worldwide.
Importing Beam Clamp requires careful attention to shipping logistics, customs compliance, and secure payment terms. Paras Traders offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 7308.90 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this Beam Clamp has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Clamps category and connect with top-tier exporters on our comprehensive global B2B marketplace. Start your sourcing journey today.
Importing Beam Clamp requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 7308.90 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Beam Clamp from Paras Traders is $2.506/Bags on FOB terms from India. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Paras Traders through EximNext.
The supplier, Paras Traders, has set a Minimum Order Quantity (MOQ) of 1 Bags for Beam Clamp. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
For international shipping and customs clearance, Beam Clamp is classified under HS Code 7308.90. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
To import Beam Clamp from India, negotiate shipping terms (FOB, CIF, or EXW) directly with Paras Traders. Ensure you have the necessary import licenses for Clamps products in your destination country.
Yes, Paras Traders is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
The key specifications for Beam Clamp supplied by Paras Traders include Grade 8.8 Carbon Steel or SS 304, Type F (Flange Beam Clamp), Carbon Steel: C 0.25-0.55%, Mn 0.60-1.65%, S max 0.05%; Stainless Steel: Cr 18%, Ni 8%, and Flange Range: 75mm - 305mm; Compatible with W6x9 to W36x150 I-beam series; Thread Size: M10 to M27. For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
Paras Traders offers Beam Clamp with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Beam Clamp is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Paras Traders through our platform.
Paras Traders maintains international quality certifications. These ensure that the Beam Clamp meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Paras Traders will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Paras Traders.
Discover more products in Clamps from verified suppliers worldwide.