Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

Bazhou WanQi Electrical Tools Factory manufactures a fibre glass rodding system for pulling cables through ductwork in telecommunications, electrical, and utility infrastructure projects. The tool consists of a flexible glass fibre reinforced polymer rod wound on a frame with feed and retrieval mechanism, available in diameters suited to common conduit sizes and in lengths tailored to project reach. Its glass fibre construction resists corrosion from moisture, chemical exposure, and soil conditions that degrade steel fish tapes over repeated use.
The rod material is e-glass fibre in a thermoset resin matrix, a standard composition that balances tensile strength against weight and bend radius compliance. Multiple diameter options allow matching to duct internal diameter, with typical trade sizes ranging from 4 mm for small communication ducts to 16 mm or greater for power cable conduits. flexibility is maintained through controlled fibre orientation and resin flexibility, permitting navigation of 90-degree bends and offset junctions without kinking or permanent deformation that would jam in the duct.
Contractors in telecom network rollout, building electrical retrofit, and municipal utility maintenance form the primary buyer base for this equipment. The lightweight characteristic reduces operator fatigue during extended cable pulling operations, particularly in vertical duct runs or overhead tray installations. Importers should confirm with Bazhou WanQi Electrical Tools Factory the exact diameter, length, frame type, and end fitting configuration available for their intended duct system standards.
| Rod Material | Fiberglass (e-glass fibre reinforced polymer, typical) |
| Diameter Options | Multiple diameters available (source-confirmed); confirm specific sizes with supplier |
| Length Variations | Customizable lengths (source-confirmed) |
| Typical Tensile Strength | Standard for e-glass rodders, approximately 1,700 - 2,100 MPa; confirm batch test data with supplier |
| Typical Minimum Bend Radius | Standard range 300 - 500 mm depending on diameter; confirm with supplier |
| Corrosion Resistance | Resistant to moisture and soil chemicals (source-confirmed fibre glass property) |
| Frame Type | Confirm with supplier: steel tubular or composite frame with brake and guide eye |
| Typical Rod Stiffness (Flexural Modulus) | Approximately 40 - 50 GPa for e-glass/epoxy (standard industry value); confirm with supplier |
| End Fitting | Confirm with supplier: threaded ferrule, swivel eye, or pulling head attachment |
| Typical Operating Temperature Range | Standard for thermoset e-glass: -40 degrees C to plus 80 degrees C; confirm resin system with supplier |
Bazhou WanQi Electrical Tools Factory is located at No.286, Ying Bin Road, Bazhou City, Hebei Province, China, postal code 065700. The supplier holds a Harbor trust tier on the platform with a response rate currently showing 0.00 percent and zero recorded average response hours. No establishment date, factory size, production capacity, or employee count appears in the available profile information.
The factory presents itself as having over twelve years of experience in manufacturing duct rodders, though this claim is not independently verified within the source data. The listing describes customizable diameter and length options for the fibre glass rodding system, targeting telecommunications and construction sectors. Buyers should independently verify business registration, production facility images or video, and request sample evaluation before committing to bulk orders.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before ordering, verify the exact glass fibre content by weight, resin system specification, and whether batch tensile testing is performed and documented. Request a sample length of your specified diameter to test bend recovery and surface finish quality in your actual duct material. Confirm that Bazhou WanQi Electrical Tools Factory can provide a certificate of conformity to a recognised standard for cable laying tools, and check their export registration status for your destination country given the zero percent response rate displayed.
Logistics for fibre glass rodders typically involve carton or palletised shipment due to the frame dimensions, with rod coiled on the reel to prevent strain. Confirm packaging adequacy for sea freight, whether the frame is knockdown for container optimisation, and delivery terms. Payment should be structured with milestone releases: deposit, pre-shipment inspection confirmation, and balance against copy of shipping documents; letters of credit are advisable for initial transactions with limited response history.
Quality checks at origin should include visual inspection for fibre voids, resin-rich areas, or surface cracks along the rod length, and a pull-to-load test on a sample section to verify tensile claims. Check that end fittings withstand specified loads without pull-out or thread stripping. Documentation required includes commercial invoice, packing list, bill of lading, certificate of origin, and any test certificates requested. Upon receipt, inspect for shipping damage to the reel flange and verify that the delivered length matches the order within tolerance.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing A Fibre Glass Rodding System for your business, securing the right balance of quality and cost is essential. Bazhou WanQi Electrical Tools Factory, a verified supplier based in China, offers this product for international export. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $300/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is a staple in the Fiberglass Products sector with strong demand from importing countries worldwide.
Importing A Fibre Glass Rodding Sys requires careful attention to shipping logistics, customs compliance, and secure payment terms. Bazhou WanQi Electrical Tools Factory offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this A Fibre Glass Rodding Sys has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Fiberglass Products category and connect with top-tier exporters on our comprehensive global B2B marketplace. Start your sourcing journey today.
Importing A Fibre Glass Rodding Sys requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for A Fibre Glass Rodding System from Bazhou WanQi Electrical Tools Factory is $300/Bags on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Bazhou WanQi Electrical Tools Factory through EximNext.
The supplier, Bazhou WanQi Electrical Tools Factory, has set a Minimum Order Quantity (MOQ) of 1 Bags for A Fibre Glass Rodding Sys. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
The HS Code classification for A Fibre Glass Rodding System depends on the specific grade and form. Contact Bazhou WanQi Electrical Tools Factory through EximNext for the exact HS Code and customs documentation required for your destination country.
To import A Fibre Glass Rodding Sys from China, negotiate shipping terms (FOB, CIF, or EXW) directly with Bazhou WanQi Electrical Tools Factory. Ensure you have the necessary import licenses for Fiberglass Products products in your destination country.
Yes, Bazhou WanQi Electrical Tools Factory is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to Bazhou WanQi Electrical Tools Factory through EximNext.
Bazhou WanQi Electrical Tools Factory offers A Fibre Glass Rodding Sys with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
A Fibre Glass Rodding Sys is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Bazhou WanQi Electrical Tools Factory through our platform.
Bazhou WanQi Electrical Tools Factory maintains international quality certifications. These ensure that the A Fibre Glass Rodding Sys meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Bazhou WanQi Electrical Tools Factory will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Bazhou WanQi Electrical Tools Factory.
Discover more products in Fiberglass Products from verified suppliers worldwide.