Import 6 Inch Rough Shreds Tyres — Buy in Bulk from Supplier in United States

The 6 inch rough shreds from Magnus Environmental are coarse fragments of car tyres, cut to a nominal size of 150 mm (6 inches) and supplied in bulk for export. These are rough shreds, not fine chips, meaning they retain irregular shapes and varied dimensions suitable for applications requiring drainage, void fill, or energy recovery. The material is sourced from end-of-life passenger vehicle tyres, processed to remove steel wire and textile fibers where possible.

Rough tyre shreds of this size are standard in civil engineering and waste-to-energy projects, where their large surface area and void ratio improve drainage in landfills or provide a high-calorific feedstock for incineration. Typical moisture content for shredded tyres is below 2%, and the material is non-biodegradable, with a bulk density of approximately 300-400 kg/m³. Standard industry classifications for tyre shreds include TDF (Tyre-Derived Fuel) grades, with 6 inch shreds often categorized as TDF-10 or TDF-20 based on size consistency.

Buyers of 6 inch rough shreds typically include waste management firms, cement kilns, and paper mills using the material as a supplemental fuel, as well as civil contractors for road subbase or landfill applications. Magnus Environmental supplies from New Castle, Delaware, with a capacity of 4-5 High Cube Open Top Containers per week. The material is loaded to a maximum of 21 US tons per Open Top Container or 18 US tons per Closed Top Container, with EXW terms placing shipping and insurance responsibility on the buyer.

Magnus Environmental operates from 220 Marsh Lane, New Castle, Delaware, United States, with 30 years of experience in supplying tyre-derived products for export. The company is classified under the harbor trust tier, indicating a verified presence for international trade. Its profile states a strict EXW policy, meaning the buyer is responsible for booking, shipping, and insurance, while Magnus Environmental handles container loading only.

The supplier’s location off I-95 provides logistical advantages, with a 30-minute drive to the Port of Philadelphia, a 1-hour drive to the Port of Baltimore, and a 2-hour drive to New York ports. This positioning facilitates efficient container pickup and transport. Magnus Environmental confirms a ready-to-ship status and a weekly capacity of 4-5 containers, but does not provide additional details about production processes, quality control, or client references.