从China供应商批发进口Emc Test Equipment Eft/ Burst Generator — FOB条款

Switching the transient process (to cut off inductive load, relay contact bounce, etc) usually interferes with other electrical and electronic equipment in the same circuit. This type of interference is characterized by high amplitude, short rise time, high repetition rate and low energy. Pulse generators are used for evaluating the performance of electrical and electronic equipment power supply port, signal, control and grounding ports when subjected to electrical fast transient burst interference. The EFT S/ T series are the state-of-the-art EFT/ Burst testers with a built-in coupling/ decoupling network for single phase or three-phase mains supply line and a HV terminal to connect a capacitive coupling clamp. Its performance fully complies with IEC 61000-4-4 standard. Features 1) Fully Compliant with latest Standards IEC/ EN 61000-4-4 2) User friendly 7� Touch Panel Display 3) Support multi-language & facilitate users 4) Built-in environment self-test program 5) Programmable operation 6) Pre-programmed IEC 61000-4-4 test settings 7) The highest pulse frequency is up to 1.2MHz 8) RS232 interface, PC control operation & printable test report 9) Comfortable use and convenient operation Technical data 1) Model: EFT S4 2) Output Voltage: 0.1~ ±5KV 3) Frequency: 1KH~1.2MHz ±10% , continuous adjustable 4) Pulse Polarity: Positive/ negative/ alternating 5) Running Time: 1~9999s, continuous adjustable 6) Internal Resistance: 50Ω ±10% 7) Pulse Front Edge: 5ns ±30% 8) Pulse Width 50ns ±30% (50Ω load), 35ns~150ns (1kΩ load) 9) Pulse Number 1~255, continuous adjustable 10) Phase Angle 0~359°synchronous, asynchronous, or automatic 11) Burst Period: 0.15~99.99s, continuous adjustable 12) Coupling/ Decoupling network: Built-in, single-phase three-wire, 16A (customer specific on demand) 13) Power Supply: AC 220V ±10% 50/ 60Hz 14) Ambient Temperature: 15~35