Import Bolts — Buy in Bulk from Supplier in Israel

M7 Tech supplies stainless steel 304 bolts with a 7/8 inch diameter and 1 metre length, originating from Israel. The material grade, AISI 304, offers good corrosion resistance in mild environments and moderate strength for general fastening duties. These dimensions place the bolts in a mid-heavy structural range, suitable for load-bearing connections where standard carbon steel would suffer surface degradation.

Stainless steel 304 contains 18 percent chromium and 8 percent nickel as standard, with a maximum carbon content of 0.08 percent under ASTM A193. The alloy's austenitic structure provides non-magnetic properties and reasonable ductility, though it is susceptible to chloride pitting in marine or chemically aggressive settings. Typical hardness for cold-finished 304 bolts falls between 70 and 85 HRB, with yield strength around 205 MPa in the annealed condition. Threads are normally rolled rather than cut to preserve grain flow and fatigue resistance.

Buyers in construction, infrastructure maintenance, and general machinery assembly use these bolts for joints exposed to weather or occasional moisture. The 7/8 inch diameter suits structural timber, steel frame connections, and equipment anchoring where codes permit non-preloaded fasteners. Israeli origin may offer advantages for buyers in Mediterranean or Middle Eastern markets through shorter shipping loops and compatible regional standards. Confirm with M7 Tech whether the bolts are supplied fully threaded or with a defined grip length, as this affects shear plane calculations.

M7 Tech operates from 33 Yerusahlim Street, Qiryat Ono, postal code 55423, in central Israel. The company's address places it within the Tel Aviv metropolitan corridor, a region with established metalworking and industrial distribution networks. The supplier tier is marked as imported, indicating that M7 Tech sources inventory from overseas manufacturers rather than producing bolts domestically.

Trust indicators are limited: the response rate shows 0.00 percent and average response time registers zero hours, suggesting no recorded buyer engagement through the platform. The trust tier is harbour, which is a baseline classification without verification depth. No factory audit, ISO certification, or transaction history is disclosed in the profile. Buyers should conduct independent due diligence, request material test certificates for the 304 grade, and verify thread conformity to ISO 261 or ASME B1.1 before committing to volume orders.