从China供应商批发进口Alfa Laval Plate Heat Exchanger Gaskets P01 — FOB条款

The Alfa Laval P01 plate heat exchanger gasket is a precision-moulded elastomeric sealing element designed for Alfa Laval's P01 series plate heat exchangers, manufactured by M.C. Heat Exchanger in Wuxi, Jiangsu Province, China. This gasket fits between corrugated stainless steel plates to create isolated flow channels for heat transfer fluids, with exact groove geometry matching Alfa Laval OEM dimensions for clip-on or glue-on installation depending on plate design. The P01 series serves smaller-capacity heat exchange duties in auxiliary cooling and heating systems where compact plate dimensions and moderate flow rates apply.

M.C. Heat Exchanger produces P01 gaskets from standard NBR (nitrile butadiene rubber), EPDM, or Viton (FKM) compounds, with NBR typical for water-glycol and mineral oil applications below 120°C, EPDM for steam and hot water to 150°C, and Viton for aggressive chemicals and temperatures to 180°C. The gasket hardness typically ranges 70 to 80 Shore A, with compression set resistance per ASTM D395B standard under 25 percent after 22 hours at 150°C for EPDM grades. Typical plate thickness for P01-compatible plates is 0.5 to 0.6 mm in AISI 304 or 316 stainless steel, with gasket groove depth machined to 2.5 to 3.0 mm depending on series revision. The supplier's catalogue lists compatibility across Alfa Laval models including P01, P16, P22, P25, P26, P31, P32, P36 and P45, indicating shared tooling or modular production capability for this gasket family.

Buyers of P01 gaskets include marine engine cooling system maintainers, HVAC service contractors, food and dairy process operators, and industrial fluid power distributors who stock aftermarket heat exchanger spares. The P01 gasket suits applications with design pressures around 1.0 MPa (10 bar) and temperatures from -20°C to 150°C depending on elastomer selection. When sourcing from M.C. Heat Exchanger, confirm the exact compound specification, batch hardness testing certificates, and whether plates require clip-type or adhesive-fixed gaskets, as Alfa Laval revised attachment methods across production eras. The supplier's harbour trust tier and zero recorded response rate suggest buyers should verify sample approval and quality documentation before committing to volume orders.

M.C. Heat Exchanger operates from No.28 Xigang Road, Wuxi City, Jiangsu Province, China, a region with established metalworking and heat transfer equipment manufacturing infrastructure. The supplier maintains a harbour trust tier on the platform, indicating a verified business registration and basic documentation without advanced verification badges. The response rate shows zero percent with no average response hours recorded, which means buyers should anticipate potential delays in initial enquiry handling and plan communications accordingly. The company's stated capability spans aftermarket spare parts for multiple OEM brands including Alfa Laval, GEA, APV/SPX, Hisaka, Tranter, SWEP, Sondex, Danfoss, API Schmidt, Vicarb, Funke, Thermowave, Accessen, Bell & Gossett, ITT, Mueller, Donghwa and Reheat, suggesting broad pattern inventory rather than exclusive single-brand focus.

The supplier's product range covers gasket and plate replacements across Alfa Laval series from M3 through to P-series and T-series models, with particular emphasis on clip-type and glued gasket configurations. No information is provided about factory floor area, number of employees, annual turnover, specific quality certifications such as ISO 9001, or named client references. Buyers should therefore request direct evidence of manufacturing capability, material batch testing, and dimensional verification against Alfa Laval OEM drawings before placing production orders. The Wuxi location offers proximity to Shanghai Port for export logistics, though the supplier does not specify preferred Incoterms, lead times, or minimum order quantities in the available data.