About Xi Ana akt Transmission Machinerya Co., Ltd. - Elevator Parts Supplier in China

Based in China, Xi Ana akt Transmission Machinerya Co., Ltd. lists ten active product entries in its catalogue. The portfolio is organized under four top categories: Elevator Parts, Elevators & Escalators, PCB, and Electronic Decoders/Encoders. Products include control boards, door controllers, door motors, and encoder modules that are used in passenger and freight elevators. The company also references specific brands such as Mitsubishi, KONE, and Thyssen in its product titles. All items fall within the broader electrical and mechanical components segment for vertical transportation systems.

The catalogue details items such as the Elevator control board LCB‑II GGA21240D1, door controller AT120 FAA24350BK1, and door motor AT120 FAA24350BL1. A Mitsubishi elevator PCB board DOR‑120C and a Thyssen door motor F9 are also listed. The KONE encoder KM713130G01 is identified with HS code 8537.10, classified under Electronic Components / PCB Assembly with Metal Housing. Additional entries include a generic elevator encoder mh108‑4096wl, a BLT Elevator controller MPK‑808, and a Thyssen test tool MC2. The final entry is a generic “Elevator parts” line that aggregates assorted components.

Product Range and Specialties of Xi Ana akt Transmission Machinerya Co., Ltd.

Xi Ana’s catalogue covers core elevator control electronics and mechanical drive units. Elevator control boards such as the LCB‑II series are typically built on FR‑4 substrates with a copper thickness of 35 µm, conforming to IPC‑2221 design rules and IEC 60204‑1 safety requirements. Door controllers and motors are usually rated for 230 V AC operation, with torque ratings between 10 Nm and 30 Nm for standard passenger‑door applications. Encoders like the KONE KM713130G01 and the mh108‑4096wl commonly provide incremental output resolutions of 4096 pulses per revolution, housed in metal casings that meet IP 65 protection. PCB assemblies for elevators often adhere to the EN 81‑20/81‑50 standards for fire resistance and electromagnetic compatibility, and are shipped in anti‑static bags within wooden crates.

Within the elevator sector, component grades are distinguished by load capacity, environmental sealing, and compliance with safety standards such as EN 81‑20. PCB boards for elevators are frequently classified as Class B for low‑outgassing and may carry CE or UL certifications. Encoder modules are evaluated by pulse accuracy (±0.5 %), operating temperature range (‑20 °C to +70 °C), and output signal types (open‑collector or line driver). Buyers often request test reports confirming IEC 61800‑5‑1 power‑converter performance for motor drives. The generic “Elevator parts” entry typically aggregates items like limit switches, safety brakes, and cable rollers, which are sized according to the elevator’s rated speed and hoistway dimensions.

Trade and Export Information - Xi Ana akt Transmission Machinerya Co., Ltd.

China is a major exporter of elevator components, and shipments from manufacturers such as Xi Ana are frequently directed to Southeast Asian, Middle Eastern, African, and Eastern European markets where new vertical‑transport projects are expanding. The KONE encoder listed under HS code 8537.10 falls within the electronic component chapter that requires compliance with International Electrotechnical Commission (IEC) standards and, for many destination countries, CE marking or UL listing. Other items like control boards and door motors are classified under HS chapters 85 (electrical machinery) and 84 (mechanical appliances) and are subject to customs inspections for safety certifications.

Standard export practice for these components involves packing individual PCBs in anti‑static bags, motor units in wooden crates with cushioning, and encoders in sealed pallets to protect against moisture. Full‑container loads (20‑ft or 40‑ft) are common, with FOB Shanghai or Ningbo ports being typical departure points. Buyers usually request certificates such as IEC 60204 compliance, CE Declaration of Conformity, and ISO 9001 quality‑management system audit reports. Depending on the destination, additional documentation like test reports for fire‑rating (EN 13501) or electromagnetic compatibility (EMC) may be required.

Sourcing from Xi Ana akt Transmission Machinerya Co., Ltd. - Buyer Guidance

Prospective buyers should obtain detailed datasheets that specify voltage, current, torque, pulse resolution, and environmental ratings for each component. Requesting an IEC‑type test report for control boards and a UL or CE certification copy for motor units helps verify conformity with safety standards. For encoder modules, ask for a calibration certificate that includes pulse accuracy, repeatability, and temperature performance. Samples are typically supplied in anti‑static packaging, and minimum order quantities range from a single unit for prototype testing to pallets of 200 units for bulk projects. Confirm that the supplier can provide the HS code declarations and compliance documents before finalizing the purchase order.

What elevator control electronics are listed in the catalogue?

The catalogue includes an Elevator control board LCB‑II GGA21240D1, a Mitsubishi DOR‑120C PCB board, a BLT Elevator controller MPK‑808, and a KONE encoder KM713130G01. These items cover logic processing, motor‑drive interfacing, and position feedback functions.

Which product has an HS code specified and what does it indicate?

The KONE encoder KM713130G01 is listed with HS code 8537.10, which classifies it as an electronic component/PCB assembly with metal housing. This code is used by customs to assess duties and verify that the item meets electronic safety standards.

What typical specifications should I verify for the door motors?

Door motors such as the AT120 FAA24350BL1 and Thyssen F9 are usually rated for 230 V AC, with torque outputs between 10 Nm and 30 Nm and operating speeds of 1500 rpm. Verify the motor’s insulation class, overload protection, and compliance with IEC 60204‑1.

Which certifications are commonly required for elevator PCBs?

Buyers typically request CE or UL certification, IEC 60204 safety compliance, and an IPC‑2221 design validation report for elevator PCBs. Additional fire‑rating documentation (EN 13501) may be needed for installations in Europe.

How are encoder modules evaluated for quality?

Encoders are assessed on pulse resolution (commonly 4096 pulses/rev), accuracy (±0.5 %), operating temperature range (‑20 °C to +70 °C), and IP protection rating (often IP 65). A calibration certificate and an EMC test report are standard supporting documents.

What packaging and shipping methods are used for bulk orders?

Bulk shipments are packed in anti‑static bags for PCBs, wooden crates with foam inserts for motor units, and sealed pallets for encoders. Orders are usually loaded into 20‑ft or 40‑ft containers and shipped FOB from major Chinese ports such as Shanghai or Ningbo.

What documentation should I request before placing an order?

Request product datasheets, IEC test reports, CE or UL certificates, and a copy of the supplier’s ISO 9001 quality‑management audit. For encoders, also ask for a calibration certificate and EMC compliance report.

Is a sample available for testing before a full purchase?

Yes, the supplier can provide single‑unit samples in anti‑static packaging for PCB and encoder items, and a small motor unit for door motor testing. Sample lead times are typically 1 - 2 weeks after request, subject to production scheduling.