About Winoil Ag - Industrial Chemicals Supplier in Switzerland

Winoil Ag is based in Switzerland and currently lists 128 distinct products across its catalogue. The supplier’s top categories include Industrial Chemicals, Paint Thinner, Household Cleaning Products, Paints & Coatings, Car Cleaning & Maintenance Products, Spray Paint, Lubricants and Paints. The product list spans chemical formulations for surface preparation, coating, cleaning and maintenance, as well as ancillary equipment such as barrel pumps and spray‑mask accessories. All items are presented with their respective material descriptions where available, and three products carry explicit HS‑code classifications. The catalogue reflects a focus on solvent‑based and oil‑based formulations used in professional painting and cleaning operations.

The catalogue includes cold and hot paint strippers such as Winstrip KNL 400, Winstrip KAL 800 and Winstrip KAL 1200, plus two‑phase hot strippers for metal (Winstrip 2 Phase Hot Paint Stripper Metal B) and aluminium (Winstrip 2 Phase Hot Paint Stripper Alu). Primer products comprise Zinc Dust Primer SBB Standard, Deep Primer AR 22 Spec, Nitro Hard Primer and an Insulating Primer containing solvents. Putty items include Universal Window Putty Beige (HS 3214.90, oil‑based linseed binder) and Gardener Universal Putty Grey (HS 3214.90, linseed oil with calcium carbonate). Additional chemicals are Rubex Wood Impregnation Oel (HS 3808.94, solvent‑based wood oil) and Rim Silver Coating (HS 3208.90, nitro‑type synthetic polymer coating). Other listed items cover shellac, varnishes, silicone sprays, tapes, and various dispensing hardware.

Product Range and Specialties of Winoil Ag

The listed paint strippers are typical of the industrial sector where cold‑solvent formulations contain 30‑45 % organic solvents such as methylene chloride or N‑methyl‑pyrrolidone, and are classified under safety class 3 with flash points above 23 °C. Hot‑stripper systems use a two‑phase alkaline base and are often supplied in 200 L steel drums for batch processing. Primers such as Zinc Dust Primer and Deep Primer AR 22 normally meet ISO 9001 quality requirements, have VOC limits around 150 g / L for EU markets, and achieve film thicknesses of 50‑80 µm after a 30‑minute cure. Oil‑based putties under HS 3214.90 typically contain 30‑45 % linseed oil binder, calcium carbonate or talc fillers, and are sold in 25 L HDPE containers or 5 kg bags. Wood impregnation oils (HS 3808.94) are formulated with bio‑based binders and preservative additives, meeting EN 71‑3 standards for wood protection. Nitro‑type coatings such as Rim Silver Coating fall under HS 3208.90 and are evaluated for hardness (Shore D 50‑70) and drying time (10‑20 min at 25 °C).

Trade and Export Information - Winoil Ag

Switzerland is a recognized exporter of high‑performance chemicals and coating products, with the majority of shipments destined for the European Union, the Middle East and Southeast Asian markets. Products classified under HS 3214.90 (oil‑based putties), HS 3808.94 (wood impregnation oils) and HS 3208.90 (synthetic polymer paints) are subject to EU REACH registration and CLP hazard communication, and many importers require ISO 9001 or ISO 14001 certification as part of their supplier audit. Typical packaging for bulk chemicals includes 200 L steel drums, 25 L HDPE jugs and 1 L metal cans, all of which are loaded in 20‑ft or 40‑ft containers under FOB Basel or Zurich terms. Swiss chemical exports are frequently inspected under the EU customs regime, and a complete Safety Data Sheet (SDS) and declaration of conformity must accompany each shipment.

Sourcing from Winoil Ag - Buyer Guidance

Buyers should request the latest Safety Data Sheet, the REACH registration number and any ISO quality‑environmental certificates before placing an order. For coating products, it is common to ask for test reports covering VOC content, flash point, film thickness and adhesion performance (ASTM D3359). Verify that the HS code listed in the commercial invoice matches the product description - e.g., HS 3214.90 for linseed‑oil putties or HS 3808.94 for wood impregnation oils - to avoid customs delays. Sample quantities of 1 L to 5 L are typically offered for primers and strippers, while minimum order quantities for bulk chemicals start at 20 drums (200 L each). Lead times of 4‑6 weeks are standard once specifications and documentation are confirmed.

What types of paint strippers does Winoil Ag provide?

The catalogue lists cold‑solvent strippers (Winstrip KNL 400, Winstrip KAL 800 and Winstrip KAL 1200) and two‑phase hot strippers formulated for metal and aluminium surfaces. All products are supplied in 200 L steel drums and meet standard safety class classifications.

Which HS codes apply to the putty products?

Universal Window Putty Beige and Gardener Universal Putty Grey are classified under HS 3214.90, which covers oil‑based putties and similar preparations. The HS code is indicated in the product data for both items.

What certifications should a buyer verify for these chemicals?

Buyers should request REACH registration, CLP classification and any ISO 9001 or ISO 14001 certificates that the supplier can provide. These documents confirm compliance with European chemical safety and quality management standards.

What packaging sizes are typical for the primers and varnishes?

Primers such as Zinc Dust Primer and Deep Primer AR 22 are commonly packed in 200 L steel drums or 25 L HDPE jugs. Varnish products like Shellac and Peel‑Off Varnish are often supplied in 1 L or 5 L metal cans.

Which markets import Swiss paint and coating chemicals most frequently?

The European Union, the Middle East and Southeast Asian countries are the principal import destinations for Swiss‑origin paints, primers and related chemicals. Trade flows are supported by established logistics hubs in Basel and Zurich.

What documentation is required before shipping?

A complete Safety Data Sheet, the REACH registration number and a commercial invoice stating the correct HS code are standard requirements. Importers may also request a test report for VOC content or flash point.

What are typical lead times and minimum order quantities?

Standard lead time is 4‑6 weeks from order confirmation, and the usual minimum order quantity for bulk chemicals is 20 drums (200 L each). Smaller quantities can be arranged for sample or pilot shipments.

How can a buyer request a sample of the wood impregnation oil?

Buyers should contact the supplier with the product name Rubex Wood Impregnation Oel and specify a sample size of 1 L to 5 L. The supplier will provide a sample together with the SDS and REACH documentation.