About Tianjin Driflex Co., Ltd. - Electric Conduits Supplier in China

Tianjin Driflex Co., Ltd. is based in China and currently lists 24 distinct products in its catalogue. The company focuses on components for electrical infrastructure, covering categories such as Electric Conduits, Cable Glands & Reels, Wire Mesh, Nickel‑Plated Brass hardware, Zinc Alloy parts, Brass hardware, and Steel Coils. Its product portfolio includes both metal‑based fittings and polymer‑based conduits used in wiring systems. The listed items span connectors, angles, and flexible conduit styles that align with standard HS code groupings for electrical hardware. The catalogue reflects a mix of stainless steel, zinc alloy, nickel‑plated brass, mild steel, and various engineering plastics.

The catalogue contains items such as Stainless Steel 45d Angle, Zinc Alloy 90d Connector (HS 8536.90), Zinc Alloy 45d Angle (HS 7904.00), Nickel Plated Brass Straight Connector (HS 7412.20), Colour Zinc Plated Steel Connector‑Straight (HS 7307.99), Liquid Tight Brass Cable Glands (HS 8536.90), Nylon Cable Glands (HS 8536.90), and several conduit variants without explicit HS codes. Eight entries provide HS codes, ranging from 7412.20 for nickel‑plated brass fittings to 8536.90 for cable glands and 7904.00 for zinc alloy angles. Materials mentioned include Zinc Alloy Die Casting (ZA27/Zamak 5), Nickel Plated Brass (CuZn alloys with Ni plating), mild steel with zinc and colour coating, and polyamide 6.6 (PA66). The product set therefore spans metal‑based connectors, plated hardware, and polymer‑based conduit accessories.

Product Range and Specialties of Tianjin Driflex Co., Ltd.

The supplier’s catalogue lists metal angles, straight connectors, and various conduit accessories in materials such as stainless steel, zinc alloy (Zamak series), nickel‑plated brass, and engineered plastics. Typical industry grades for these items include stainless steel 304/316 for corrosion resistance, zinc alloy Zamak 5 for cast fittings, and nickel plating thickness of 5‑15 µm to meet IEC 60228 standards. Nylon cable glands are commonly produced from PA66 with a melt flow index of 10‑20 g/10 min, providing high heat resistance for fire‑rated installations. Flexible conduits such as PVC or PE corrugated tubes are usually supplied in 20 ft or 40 ft reels, with wall thicknesses between 0.8 mm and 2.0 mm depending on voltage rating. Buyers often request material test reports, dimensional drawings, and plating thickness certificates to confirm compliance with regional standards.

Trade and Export Information - Tianjin Driflex Co., Ltd.

China is a major exporter of electrical hardware, and products like conduit fittings, cable glands, and plated connectors are routinely shipped to Europe, North America, and Southeast Asia. HS chapter 73 (articles of iron or steel) and chapter 74 (copper and articles thereof) cover the metal fittings, while chapter 85 (electrical machinery) includes cable glands and related accessories. Importers typically require ISO 9001 quality management certification, CE marking for EU compliance, UL listing for the United States, and RoHS declarations to limit hazardous substances. Standard packaging involves cardboard boxes with moisture‑resistant liners for small connectors, and palletised steel coils or bulk conduit reels wrapped in shrink film for larger shipments. Common Incoterms are FOB Tianjin Port or CIF destination port, with container loading in 20‑ft or 40‑ft units depending on product volume.

Sourcing from Tianjin Driflex Co., Ltd. - Buyer Guidance

When sourcing from Tianjin Driflex, request a mill test report for each metal grade and a plating thickness verification for nickel‑plated items. For polymer‑based glands and conduits, ask for a PA66 certification sheet that includes melt flow index and fire‑rating (e.g., UL‑94 V‑0). Verify that the supplier can provide CE Declaration of Conformity or UL test reports if you target those markets, and confirm that RoHS compliance documentation is available before finalising the order. Checking dimensional drawings against IEC standards and confirming packaging details (e.g., moisture‑proof liners for connectors) helps avoid delays in customs clearance.

What product categories does Tianjin Driflex offer?

The supplier lists items in Electric Conduits, Cable Glands & Reels, Wire Mesh, Nickel‑Plated Brass hardware, Zinc Alloy fittings, Brass hardware, and Steel Coils, covering both metal and polymer conduit components.

Which HS codes are associated with the catalogued products?

Products are classified under HS 7412.20 for nickel‑plated brass connectors and angles, HS 7904.00 for zinc alloy angles, HS 7307.99 for colour‑zinc‑plated steel connectors, and HS 8536.90 for cable glands and related polymer fittings.

What materials are used for the connectors?

Connectors are made from stainless steel, zinc alloy (Zamak series), nickel‑plated brass (CuZn alloys with electroless nickel), and mild steel that is zinc‑plated and colour‑coated.

What typical specifications should buyers verify?

Verify material grade (e.g., 304/316 stainless steel, Zamak 5), plating thickness (typically 5‑15 µm for nickel), dimensional tolerances per IEC 60228, and polymer grade (PA66 for nylon glands). Request a mill test report and plating certification for each item.

What certifications are commonly required for these electrical hardware items?

International buyers often require ISO 9001 quality management, CE marking for EU markets, UL listing for North America, and RoHS compliance for hazardous substance limits.

How are the conduits typically packaged for export?

Flexible conduits and rigid angles are usually packed in cardboard boxes with moisture‑resistant liners; larger steel coils are shipped on pallets or in 20‑ft containers, sealed with shrink‑wrap for protection during transit.

What are typical minimum order quantities (MOQ) and lead times?

MOQs vary by item but generally start at 500 pieces for standard connectors and 1 ton for steel coils; lead times range from 15 days for stocked metal fittings to 30‑45 days for polymer‑coated conduit bundles.

Which regions import these types of products most frequently?

Europe, North America, and Southeast Asian countries such as Vietnam and Thailand are the largest importers of Chinese electrical conduit and hardware, driven by construction and infrastructure projects.