About Sterling Overseas - Sanitary Ware and Plumbing Supplier in India

Sterling Overseas is an India-based supplier listing 58 active products across sanitary ware, bathroom fittings, plumbing hardware and casual apparel. The catalogue is concentrated in eight categories, led by Sinks, Washbasins and Countertops, Sanitary Wares, Flanges, Shirts and T-Shirts, Toilet Seats, Faucets, Shower Accessories and Bathroom Accessories, with the sanitary and plumbing lines accounting for the bulk of the 58 active SKUs. Geographically, the company sits within India's established sanitary ware and brassware manufacturing belt, a cluster that supplies both domestic housing and overseas projects across the Gulf, Africa and Southeast Asia. The catalogue covers vitreous and acrylic bathroom fixtures alongside brass and stainless steel fittings, with select items carrying explicit HS codes such as 7419.99 for the Copper Bath Claw Tub, 3922.10 for the Acrylic Bath Tub, 8481.80 for the Turkey Bib Cock, 8421.21 for the Tap Filter, 9028.90 for the Sensor Tap, 7412.20 for the Swan Tap and Extension Nipple, and 7307.19 for the Braided Connection Pipe.

The product mix spans complete bathroom suites and individual components: water closets (Smart Toilet, One Piece Toilet, Eastern Pan, Orissa Pan 20", Hydraulic Seat Cover), bathing units (Copper Bath Claw Tub, Acrylic Bath Tub, Shower Panel, Shower Set CP, Shower Set Gold, Shower Head), kitchen and bathroom fixtures (Kitchen Sink, Double Bowl Sink, Corner Sink, Copper Basin, Vanity Cabinet), and a wide brassware range (Kitchen Faucet, Single Hole Kitchen Tap, Short Body Bib Cock, Turkey Bib Cock, Swan Tap, Sensor Tap, Angle Valve, Health Faucet PVC, Health Faucet CP, Deltar Set, Tap Filter, Extension Nipple, Braided Connection Pipe). Outside the bathroom line, the catalogue also includes Shirts and T-Shirts under the apparel category and Flanges under industrial fittings. Materials named in the facts include solid copper at 90-99% Cu for the clawfoot tub, PMMA acrylic with fiberglass reinforcement for the bath tub, brass H59-1 and CZ121 with chrome plating for taps, and stainless steel 304/316 braiding with EPDM or PTFE liners for the flexible connection pipe.

Product Range and Specialties of Sterling Overseas

Sterling Overseas's sanitary catalogue covers the typical Indian export grade spread for bathroom suites: vitreous china water closets in one-piece and wall-hung configurations, acrylic bath tubs reinforced with fiberglass (HS 3922.10) in standard lengths of roughly 1.5 m to 1.8 m, and copper clawfoot tubs (HS 7419.99) built from Cu 90-99% copper sheets with brass or bronze feet, a niche usually supplied to boutique hotel and heritage renovation projects. Brassware items such as the Turkey Bib Cock (HS 8481.80), Swan Tap and Extension Nipple (HS 7412.20) and Sensor Tap (HS 9028.90) are listed in materials consistent with the Indian OEM norm of CW614N brass bodies with chrome plating, paired with stainless steel 304 cartridges and spouts for corrosion resistance. The kitchen and bathroom sink line includes single bowl, double bowl and corner configurations in stainless steel, while the flexible connection pipe (HS 7307.19) uses 304 or 316 stainless braiding over EPDM or PTFE inner tubing, the standard specification for hot and cold water supply lines in residential and hotel plumbing. Beyond sanitary ware, the catalogue lists Flanges under industrial fittings and a casual apparel line of Shirts and T-Shirts, giving the supplier a mixed sanitary-plus-soft-goods export profile that is common among Indian trading houses operating from Gujarat and Maharashtra.

Industry buyers sourcing Indian sanitary ware typically evaluate products against IS specifications for vitreous china (IS 2556), EN 997 for European-market water closets, ASME A112.19.2 for the US, and WaterMark or WELS requirements for Australia and the Gulf. Brassware is usually traded against BS EN 200 for taps, EN 817 for single-lever mixers, and EN 1112/1113 for shower outlets, with chrome plating thickness commonly specified at 0.2 to 0.3 microns of nickel plus 0.05 to 0.1 microns of chromium. Acrylic bath tubs in this category are typically offered in 3 to 5 mm virgin or cast PMMA sheet with fiberglass and polyester resin backing, while copper tubs are usually hand-finished and patinated. Flexible connectors under HS 7307.19 are typically rated to 10 bar working pressure at 90 degrees Celsius with EPDM liners, or 20 bar with PTFE liners for higher-spec installations.

Trade and Export Information - Sterling Overseas

India is one of the world's largest exporters of ceramic sanitary ware and a significant supplier of brass bathroom fittings, with the bulk of production clustered in Gujarat (Morbi, Jamnagar, Ahmedabad), Rajasthan (Kishangarh), and Maharashtra. Sanitary ware and plumbing fittings from India typically flow into the Gulf Cooperation Council countries, the wider Middle East, Africa (Kenya, Nigeria, Tanzania, South Africa), Southeast Asia (Malaysia, Singapore, Vietnam), and increasingly into European and Latin American markets through project and distribution channels. The relevant HS code families for this catalogue are HS 6910 for ceramic sanitary ware (sinks, washbasins, toilet seats and pans where made of porcelain or china), HS 3922 for plastic baths and shower trays (covering the Acrylic Bath Tub at 3922.10), HS 7419 for other articles of copper (7419.99 for the Copper Bath Claw Tub), HS 8481 for taps, cocks and valves (8481.80 for the Turkey Bib Cock), HS 8421 for filtering or purifying machinery (8421.21 for the Tap Filter), HS 9028 for gas, liquid or electricity supply meters including sensor taps (9028.90), HS 7412 for copper tube or pipe fittings (7412.20 for the Swan Tap and Extension Nipple), and HS 7307 for tube or pipe fittings of iron or steel (7307.19 for the Braided Connection Pipe).

Export shipments of bathroom suites and brassware from India are typically packed in corrugated cartons with expanded polystyrene corner protectors, palletized and stretch-wrapped for 20 ft or 40 ft container loads, with a standard 40 ft high-cube container holding roughly 250 to 350 ceramic sets depending on configuration. Indian sanitary exporters commonly work on FOB Mundra, JNPT or Nhava Sheva terms, with CIF and CFR options for Gulf and African destinations and DDP available for buyers with bonded warehouses. Certifications typically requested by overseas buyers in this category include ISO 9001 for quality management, CE marking for the European Economic Area, WaterMark for Australia, WRAS or NSF for the United Kingdom and North America, and SASO for Saudi Arabia, alongside product-level test reports for lead leaching (typically under 0.25 percent by weight for brassware in contact with potable water), chrome plating adhesion (per IS 4827 or ASTM B571), and ceramic glaze resistance to acids and alkalis. Buyers in the Gulf and Africa also frequently require country-of-origin certificates, pre-shipment inspection reports from agencies such as SGS or Bureau Veritas, and fumigated or heat-treated wooden packaging in line with ISPM 15.

Sourcing from Sterling Overseas - Buyer Guidance

Buyers sourcing from Sterling Overseas should request the catalogue split by category and confirm which items are in current production versus made-to-order, since Indian sanitary exporters often list full ranges but hold stock only on high-rotation SKUs such as bib cocks, angle valves and braided connectors. For vitreous china items (Smart Toilet, One Piece Toilet, Eastern Pan, Orissa Pan, washbasins) ask for the IS 2556 or equivalent EN 997 test certificate, water absorption figure (typically under 0.5 percent for vitreous china), and a recent SGS or Bureau Veritas pre-shipment inspection report. For brassware, request the brass grade (CW614N, CZ121 or H59-1), chrome plating thickness in microns, and confirmation of WRAS, NSF/ANSI 61 or equivalent potability approval for any item carrying drinking water. For the Copper Bath Claw Tub (HS 7419.99) confirm copper sheet gauge, Cu percentage, weld type at the seams, and whether the feet are cast brass or bronze. For the Acrylic Bath Tub (HS 3922.10) confirm PMMA sheet thickness, fiberglass mat weight in g/m2, and whether the tub is reinforced with a wooden or steel base frame. For the Braided Connection Pipe (HS 7307.19) request burst pressure test data, working pressure rating, liner material (EPDM or PTFE), and the relevant EN 13618 or KIWA certificate where the destination market requires it.

Before placing a volume order, buyers should request a pre-production sample of each SKU, a signed proforma invoice stating Incoterm (typically FOB Indian port or CIF destination port), and a clear lead time in days from confirmed order to ex-factory dispatch, which for Indian sanitary ware commonly runs 30 to 45 days for stocked brassware and 45 to 75 days for ceramic and acrylic items. Confirm packaging specification (individual carton dimensions, pallet count per 20 ft or 40 ft container) and verify that wooden pallets and crates carry the ISPM 15 mark if the destination applies it. Finally, align payment terms (commonly 30 percent T/T advance with 70 percent against copy of B/L for first-time buyers, shifting to L/C at sight for repeat orders) and ask for a list of the supplier's existing export markets to gauge familiarity with the destination's documentation and inspection regime.

What product categories does Sterling Overseas list in its catalogue?

The catalogue covers eight categories: Sinks, Washbasins and Countertops, Sanitary Wares, Flanges, Shirts and T-Shirts, Toilet Seats, Faucets, Shower Accessories and Bathroom Accessories, with 58 active products spanning ceramic water closets, acrylic and copper bath tubs, brass and stainless steel taps, kitchen sinks, vanity cabinets and braided connectors. Outside sanitary ware, the supplier also lists industrial flanges and a casual apparel line of shirts and T-shirts.

Which HS codes apply to Sterling Overseas's sanitary ware and plumbing fittings?

The catalogue carries explicit HS codes on selected items: 7419.99 for the Copper Bath Claw Tub, 3922.10 for the Acrylic Bath Tub, 8481.80 for the Turkey Bib Cock, 8421.21 for the Tap Filter, 9028.90 for the Sensor Tap, 7412.20 for the Swan Tap and Extension Nipple, and 7307.19 for the Braided Connection Pipe. Other items without a stated HS code in the catalogue fall under HS 6910 for ceramic sanitary ware, HS 8481 for taps and valves, and HS 7418 for household articles of copper, depending on the exact product.

What materials are used in Sterling Overseas's brassware and bath fittings?

Taps such as the Swan Tap and Extension Nipple use brass CW614N or CZ121 with stainless steel 304 components, the Turkey Bib Cock is brass with chrome plating, the Sensor Tap combines brass CW614N with stainless steel 304, and the Tap Filter pairs a stainless steel 304 mesh with a brass H59-1 housing. The Copper Bath Claw Tub is built from solid copper at 90 to 99 percent Cu with brass or bronze feet, the Acrylic Bath Tub uses PMMA acrylic reinforced with fiberglass, and the Braided Connection Pipe uses stainless steel 304 or 316 braiding over an EPDM or PTFE inner liner.

Which certifications and test reports should a buyer request when sourcing from Sterling Overseas?

Buyers should request ISO 9001 for the supplier's quality system, plus product-level approvals relevant to the destination market: CE marking for the EU, WRAS or NSF/ANSI 61 for the UK and North America, WaterMark for Australia, and SASO for Saudi Arabia. For brassware in contact with potable water, ask for a lead-leaching test report under 0.25 percent by weight, and for ceramic items request IS 2556 or EN 997 test certificates plus a recent pre-shipment inspection from SGS or Bureau Veritas.

What is the typical packaging and container loading for sanitary ware exports from India?

Ceramic items are usually packed in individual corrugated cartons with expanded polystyrene corner protection, palletized and stretch-wrapped, while bath tubs and vanity cabinets are wrapped in foam sheet and bubble film and crated in plywood or ISPM 15-marked wooden cases. A standard 40 ft high-cube container typically holds 250 to 350 ceramic bathroom sets depending on configuration, and wooden pallets must carry the ISPM 15 heat-treatment or fumigation mark for most African, European and Gulf destinations.

What are the usual Incoterms and shipping ports for Indian sanitary ware exports?

Indian sanitary exporters most commonly quote on FOB Mundra, JNPT (Nhava Sheva) or Chennai, with CIF and CFR options available for Gulf and African buyers and DDP for clients with bonded warehouses. Sea freight transit times are typically 3 to 5 days to the Gulf, 10 to 14 days to East Africa, 18 to 25 days to West Africa, and 20 to 30 days to Europe.

What is the typical lead time for orders placed with Sterling Overseas?

Stocked brassware items such as bib cocks, angle valves and braided connectors usually dispatch within 30 to 45 days of confirmed order, while ceramic water closets, washbasins and acrylic bath tubs typically require 45 to 75 days ex-factory. Custom finishes on copper tubs and special-order vanity cabinets can extend lead time beyond 75 days, so confirm production slot at the time of enquiry.

How should a buyer verify quality before placing a volume order with Sterling Overseas?

Request a pre-production sample of each SKU, the relevant material test certificates (brass grade, copper percentage, acrylic sheet thickness), and a recent third-party inspection report. Confirm packaging specification, request a proforma invoice with the agreed Incoterm and payment terms, and for first orders consider an L/C at sight or 30 percent T/T advance with balance against copy of B/L.