About Shenzhen Vcell Power Co., Ltd. - Batteries & Chargers Supplier in China

Shenzhen Vcell Power Co., Ltd. is based in Shenzhen, China and currently lists six distinct battery products across its catalogue. The listings fall under the HS‑7.60 chapter for primary batteries and cover both lithium polymer (LiPo) and lithium iron phosphate (LiFePO4) chemistries, as well as a single 18650‑type lithium‑ion cell. The active product count of six includes a 3.7 V 700 mAh LiPo cell, a 12 V 100 Ah LiFePO4 solar battery, a 5 kWh 51.2 V/48 V 100 Ah LiFePO4 module, a 24 V 30 Ah LiFePO4 pack, a 24 V 30 Ah rechargeable LiFePO4 pack, and a 14.8 V 2000 mAh 4S1P 18650 lithium‑ion battery. Each entry references the HS code 8507.60 where provided, indicating conformity with the international tariff classification for primary and secondary batteries.

The catalogue shows a mix of portable and stationary power solutions. The LiPo battery is specified at 3.7 V and 700 mAh, suitable for compact electronics, while the LiFePO4 entries range from 24 V 30 Ah packs to a larger 12 V 100 Ah solar‑grade unit, reflecting typical energy‑density and cycle‑life advantages of iron‑phosphate chemistry. The 5 kWh module combines higher voltage configurations (51.2 V or 48 V) with a 100 Ah capacity, targeting off‑grid solar storage. The 18650 cell is described with a 4S1P configuration, LiCoO2/NMC cathode and graphite anode, matching common standards for high‑energy handheld devices. All products are listed without explicit certifications, leaving verification of safety and performance documentation to the buyer.

Product Range and Specialties of Shenzhen Vcell Power Co., Ltd.

Shenzhen Vcell Power’s catalogue concentrates on rechargeable lithium‑based batteries used in consumer electronics, solar energy storage, and portable power tools. The product set includes lithium polymer cells (3.7 V 700 mAh), lithium iron phosphate batteries in 12 V 100 Ah, 24 V 30 Ah, and modular 5 kWh configurations, plus a 18650‑type lithium‑ion cell (14.8 V 2000 mAh). In the broader industry, LiFePO4 batteries are commonly graded by nominal voltage, amp‑hour rating, and cycle life (often 2000+ cycles at 80 % depth of discharge), while LiPo cells are evaluated by energy density (typically 150 - 250 Wh kg‑1) and discharge rate (C‑rating). Buyers usually request IEC 62133 compliance for safety, UN 38.3 test reports for transport, and RoHS certification for restricted substances. Standard packaging for these batteries includes anti‑static bags, insulated cardboard, and bulk pallets that fit a 20‑ft container (approximately 30 - 35 kWh of LiFePO4 modules per container).

Trade and Export Information - Shenzhen Vcell Power Co., Ltd.

Lithium‑based rechargeable batteries from China are exported primarily to Europe, North America, and Southeast Asian markets where renewable‑energy installations and consumer‑electronics manufacturing drive demand. The HS‑code 8507.60 covers both primary and secondary batteries, and customs authorities often request conformity certificates such as IEC 62133, UN 38.3, and CE marking for European shipments. Export logistics typically involve C‑IF or FOB terms, with goods packed in insulated cartons and loaded on 20‑ft or 40‑ft containers; a 20‑ft container can hold roughly 600 kg of LiFePO4 modules, while a 40‑ft container doubles that capacity. Importers frequently require pre‑shipment inspection reports and may engage third‑party laboratories for capacity and safety testing, especially for battery packs intended for solar‑power applications.

Sourcing from Shenzhen Vcell Power Co., Ltd. - Buyer Guidance

When sourcing from Shenzhen Vcell Power, buyers should request the latest UN 38.3 test report and IEC 62133 compliance certificate for each battery type, as these documents verify safe transport and operational safety. For the LiFePO4 solar batteries, a performance test sheet showing nominal voltage, capacity (Ah), and cycle‑life data is standard, while the LiPo and 18650 cells benefit from a discharge‑rate (C‑rating) test and a temperature‑range specification. Verify that packaging meets anti‑static and moisture‑barrier requirements, and confirm the dimensions and weight per unit to calculate container loading. Request a sample batch with a full test report before committing to larger orders, and clarify the supplier’s MOQ, typical lead time (often 15‑30 days after order confirmation), and the preferred Incoterm for your region.

What battery chemistries are listed in the Shenzhen Vcell Power catalogue?

The catalogue includes lithium polymer (LiPo), lithium iron phosphate (LiFePO4) and a 18650‑type lithium‑ion cell, each identified with its nominal voltage and capacity.

Which HS code applies to most of the listed products?

Five of the six products are classified under HS code 8507.60, which covers primary and secondary batteries.

What typical certifications should a buyer request for these batteries?

Buyers normally request UN 38.3 transport test reports, IEC 62133 safety certification, and RoHS compliance documentation.

What are the common specifications buyers verify for LiFePO4 solar batteries?

Buyers check nominal voltage (12 V, 24 V, 48 V/51.2 V), amp‑hour rating (30 Ah, 100 Ah), total energy (kWh), cycle‑life expectancy, and peak discharge current.

How are the batteries typically packaged for export?

Standard export packaging uses anti‑static bags inside insulated cardboard boxes, stacked on pallets suitable for 20‑ft or 40‑ft containers.

What is a typical minimum order quantity (MOQ) and lead time for these products?

While the catalogue does not state an MOQ, industry practice for similar lithium batteries ranges from 100 units to a full pallet, with lead times of 15‑30 days after order confirmation.

Which markets commonly import Chinese LiFePO4 solar batteries?

European Union countries, the United States, and Southeast Asian nations such as Vietnam and Thailand are major importers of LiFePO4 solar storage solutions.

What test reports are important for the 18650 lithium‑ion battery?

A full UN 38.3 transport test, capacity verification at the rated 2000 mAh, and a C‑rating discharge test (e.g., 1C or 2C) are essential for the 14.8 V 2000 mAh 18650 cell.