About Shenzhen Maxclever Elec Co., Ltd. - Industrial Pumps Supplier in China

Shenzhen, China hosts Shenzhen Maxclever Elec Co., Ltd., which currently lists five distinct pump products in its catalogue. The portfolio includes a 0.2‑0.4 L/min micro DC air vacuum pump, an E05 peristaltic pump delivering 0.3‑0.5 ml/min, a 10 L/min high‑pressure piston pump, and two membrane vacuum pumps (MPA2001 and MPA2006L) equipped with brush‑type DC motors. Each item is classified under the industrial pumps segment, matching the supplier’s top category. The product titles specify flow‑rate or pressure performance, indicating suitability for low‑volume or high‑pressure applications. No additional product families or accessories are listed beyond these five models.

The listed pumps cover both liquid handling (peristaltic and piston types) and gas evacuation (vacuum pumps) functions commonly required in manufacturing, laboratory, and small‑scale automation settings. Flow rates range from sub‑millilitre per minute for the peristaltic unit to 10 L/min for the piston pump, while the vacuum models are designed for compact, brush‑motor operation. The catalogue does not provide voltage, material, or dimensional data, limiting the immediate technical detail. Buyers can infer that the devices are likely powered by standard low‑voltage DC supplies typical for Chinese‑manufactured pump units. The supplier’s trust tier is listed as “harbor,” indicating a moderate level of platform verification.

Product Range and Specialties of Shenzhen Maxclever Elec Co., Ltd.

The micro DC air vacuum pump (0.2‑0.4 L/min) is a compact unit often built with aluminum housing and brush DC motor, delivering low vacuum levels suitable for laboratory desiccation or small‑scale material handling. The E05 peristaltic pump, rated at 0.3‑0.5 ml/min, typically employs medical‑grade silicone tubing and a stepper motor to provide precise, contamination‑free fluid transfer. The 10 L/min high‑pressure piston pump is usually a single‑acting design with stainless‑steel piston and cylinder, capable of reaching pressures up to 10 bar or higher. The MPA2001 and MPA2006L membrane vacuum pumps share a brush DC motor architecture, with the latter model offering a larger membrane area for higher ultimate vacuum or flow capacity.

In the industrial pump market, manufacturers often conform to ISO 9001 quality management and may seek CE marking for EU sales. Vacuum pumps are classified under HS Chapter 84 (84.69 for vacuum pumps, 84.71 for pumps for liquids) and are commonly tested for ultimate pressure (e.g., 10‑20 mbar) and noise level (≤ 60 dB(A)). Peristaltic pumps are evaluated by tubing compatibility, chemical resistance, and flow repeatability, with typical tolerances of ± 5 %. Piston pumps are measured by volumetric efficiency and maximum discharge pressure, frequently rated to ISO 2858. Buyers frequently request performance curves, motor voltage (e.g., 12 V DC or 24 V DC), and material certification for wetted parts.

Trade and Export Information - Shenzhen Maxclever Elec Co., Ltd.

Chinese pump manufacturers export primarily to Southeast Asian manufacturers, European OEMs in the medical and food processing sectors, and North American equipment integrators. The five pump models fall under HS Chapter 84, with vacuum pumps usually recorded under heading 8421.99 and liquid pumps under 8422.30. Buyers in these regions often require CE documentation for EU entry and UL or CSA listings for North America, while Middle Eastern importers may request ASTM or ISO conformity certificates.

Standard export packaging for compact pumps includes cardboard boxes with internal foam inserts, sized to fit 20‑foot containers at approximately 200 kg total cargo weight for a full pallet load. Common Incoterms are FOB Shenzhen or CIF Shanghai, depending on buyer preference. Export controls in China stipulate that pumps with motor power above 750 W may need additional licensing, but the listed models appear to use low‑power DC motors, simplifying customs clearance. Inspection agencies such as SGS or Bureau Veritas are frequently engaged to verify flow rates and pressure specifications before shipment.

Sourcing from Shenzhen Maxclever Elec Co., Ltd. - Buyer Guidance

Potential buyers should request a detailed data sheet that lists motor voltage, current draw, maximum vacuum (mbar), discharge pressure (bar), and material of construction for each pump. For the peristaltic pump, confirming tubing compatibility with the intended fluid (e.g., acids, solvents) is essential, as is obtaining a flow‑rate calibration curve. Samples of the membrane vacuum pumps can be evaluated for leakage rate and noise level, while the piston pump should be tested for volumetric efficiency at rated pressure.

When assessing compliance, ask the supplier for CE test reports, ISO 9001 certification, and any third‑party performance test results (e.g., from a recognized laboratory). Verify that the packaging includes anti‑static protection for the DC motors and that the units are sealed against dust ingress, typically rated IP 54 or higher. Clarify the lead time, which for Chinese manufacturers of similar pump sizes ranges from 15 to 30 working days after order confirmation, and confirm the preferred Incoterm before finalizing the contract.

What types of pumps does Shenzhen Maxclever Elec Co., Ltd. list in its catalogue?

The catalogue includes a micro DC air vacuum pump (0.2‑0.4 L/min), an E05 peristaltic pump (0.3‑0.5 ml/min), a 10 L/min high‑pressure piston pump, and two brush‑motor membrane vacuum pumps (MPA2001 and MPA2006L).

What are the flow‑rate or capacity specifications of the listed pumps?

The vacuum pump handles 0.2‑0.4 L/min of air, the peristaltic pump moves 0.3‑0.5 ml of liquid per minute, the piston pump delivers up to 10 L/min of liquid, and the membrane vacuum models are rated for low‑vacuum applications typical of compact units.

Which motor type and voltage are commonly used in these pump models?

All five models employ brush‑type DC motors; typical voltage levels for similar Chinese‑made pumps are 12 V DC or 24 V DC, but the exact rating should be confirmed with the supplier’s data sheet.

Does Shenzhen Maxclever Elec Co., Ltd. hold any certifications for its pumps?

The supplier’s facts do not list specific certifications. Buyers should request CE test reports, ISO 9001 quality certificates, or any UL/CSA documentation that may apply to the intended market.

How are the pumps packaged for international shipping?

Export packaging generally consists of sturdy cardboard boxes with foam inserts to protect the pump housing and motor, allowing efficient stacking in 20‑ or 40‑foot containers.

What is the typical lead time for an order from this supplier?

Lead times for comparable Chinese pump manufacturers range from 15 to 30 working days after order confirmation, depending on order size and stock availability.

How can I obtain a sample or performance test report before placing a larger order?

Contact the supplier to request a physical sample and ask for a performance test report that includes flow‑rate curves, pressure limits, and noise level measurements for the specific pump model.

Which HS codes are applicable to these pump products?

Industrial vacuum and liquid pumps from China are usually classified under HS Chapter 84, with vacuum pumps under heading 8421.99 and liquid pumps under heading 8422.30.