About Shandong Eagle-elite International Co., Ltd. - Heavy Machinery Parts Supplier in China

China, with a catalogue of 22 listed items, supplies Shandong Eagle-elite International Co., Ltd. with components for construction and industrial machinery. The product list includes transmission assemblies, axle shafts, hydraulic oil, excavator bucket teeth, brake master valves, water‑tank radiators, fuel tanks, headlamps, drawing cylinders, steel wire ropes and related valve and pump assemblies. Each item is assigned to HS‑code families such as 8708.99 for vehicle parts, 2710.19 for hydraulic oil, 8431.49 for machine parts, 8408.99 for fuel equipment, 8512.20 for headlamps, 8412.21 for hydraulic cylinders and 7312.10 for steel wire rope. Materials mentioned range from alloy steel housings and forged steel gears to high‑manganese Hadfield steel and mineral‑base hydraulic oil with anti‑wear additives. The catalogue reflects a focus on heavy‑duty equipment used in building construction, road rollers, cranes, storage tanks and industrial cylinders.

The supplier’s top categories cover Building Construction Machineries and Equipments, Road Rollers, Bulldozers & Wheel Loaders, Storage Tanks, Cranes & Lifts, Industrial Valves & Gauges, Hydraulic Equipments, Cars, Jeeps & Vans and Industrial Cylinders. Specific entries include the XCMG GR180/GR215 transmission assembly, Shantui bulldozer axle shaft, XCMG hydraulic oil, Komatsu/Caterpillar/Volvo excavator bucket tooth, Sinotruk brake master valve, XCMG fuel equipment, Shacman M3000 headlamp, XCMG loader drawing cylinder, and XCMG crane steel wire rope, among others. The HS codes listed correspond to the standard customs classifications for automotive parts, lubricants, machine components and steel products. No certifications are stated in the supplied data, so buyers should verify compliance with relevant industry standards. The range of 22 distinct products indicates a diversified offering within heavy‑machinery component segments.

Product Range and Specialties of Shandong Eagle-elite International Co., Ltd.

Transmission housings and axle shafts are typically fabricated from alloy steel grades such as 42CrMo, heat‑treated to a hardness of 320‑350 HB and meeting GB/T 3077 or equivalent standards. Hydraulic oil listed under HS 2710.19 is usually a mineral base oil conforming to ISO VG 46‑68, with anti‑wear additives that satisfy API GL‑5 or ISO 12925‑2 specifications. Excavator bucket teeth are commonly made from high‑manganese Hadfield steel (≈12 % Mn) delivering a wear‑resistance of up to 1 × 10⁶ cycles. Steel wire ropes in HS 7312.10 are produced from high‑carbon steel, often galvanized, and meet ASTM A1023 or ISO 13628 requirements for tensile strength of 1 800 MPa. Headlamps under HS 8512.20 generally use polycarbonate lenses combined with ABS or PP housings and comply with IEC 60598 illumination standards.

Cranes, loaders and bulldozers frequently use hydraulic cylinders with carbon‑steel bodies, chrome‑plated rods and NBR or polyurethane seals, rated for pressures up to 30 MPa. Fuel tanks and water‑tank radiators are fabricated from mild steel with brass or steel fittings, often coated for corrosion resistance and shipped in 20‑ft or 40‑ft containers with wooden pallets. Valve assemblies and pump gears are machined from hardened steel, tolerances typically within ±0.02 mm. These specifications align with the common expectations of buyers in construction, mining and infrastructure projects worldwide.

Trade and Export Information - Shandong Eagle-elite International Co., Ltd.

China is a major exporter of heavy‑machinery components, and parts classified under HS 8708.99, 8431.49, 8412.21 and 7312.10 are regularly shipped to markets in Southeast Asia, the Middle East, Africa and Latin America. Buyers in these regions often require CE marking for EU destinations, ISO 9001 quality‑management certification, and material test reports that reference relevant Chinese GB standards or international equivalents.

Hydraulic oil (HS 2710.19) is typically exported in 20 L drums or bulk containers, with safety data sheets and compliance certificates for ISO 14001 environmental‑management. Steel wire ropes and alloy‑steel components are usually packed in wooden crates or steel drums, sealed and labeled according to IMO and IATA regulations for sea and air freight. Common Incoterms used by Chinese suppliers include FOB Shanghai or CIF destination port, with standard lead times of 15‑45 days depending on the product complexity.

Sourcing from Shandong Eagle-elite International Co., Ltd. - Buyer Guidance

When sourcing from this supplier, buyers should request material certificates confirming alloy composition (e.g., 42CrMo), heat‑treatment records, and hardness test results for steel parts. For hydraulic oil, a product data sheet showing ISO VG grade, viscosity at 40 °C/100 °C, and anti‑wear additive levels should be obtained, together with a third‑party analysis report.

Buyers are advised to verify that any exported equipment complies with destination‑specific certifications such as CE for the European Union, ISO 9001 for quality management, and any required environmental or safety permits. Inspection of packaging, container sealing and the presence of a full packing list matching the HS codes will help ensure smooth customs clearance. Samples or pilot runs are common practice for critical components like valve assemblies or hydraulic cylinders before full‑scale orders.

What types of heavy‑machinery components are listed in the catalogue?

The catalogue includes transmission assemblies, axle shafts, hydraulic oil, excavator bucket teeth, brake master valves, water‑tank radiators, fuel tanks, headlamps, hydraulic drawing cylinders, steel wire ropes, pilot valve assemblies, pump gears, loader headlights, electronically controlled gearboxes, dump trucks, track shoe assemblies, steering cylinder parts, and wheel loaders.

Which HS codes are associated with the listed products?

Products are classified under HS 8708.99 for vehicle parts, HS 2710.19 for hydraulic oil, HS 8431.49 for machine parts, HS 8408.99 for fuel equipment, HS 8512.20 for headlamps, HS 8412.21 for hydraulic cylinders, and HS 7312.10 for steel wire rope.

What material standards are typical for the alloy‑steel transmission and axle components?

Alloy‑steel housings and axle shafts are commonly produced from heat‑treated 42CrMo or equivalent grades, meeting GB/T 3077, with a typical hardness of 320‑350 HB and tensile strength around 1 200 MPa.

What certifications should a buyer request for the hydraulic oil?

Buyers should request a product data sheet indicating ISO VG grade, viscosity at 40 °C and 100 °C, and confirmation of compliance with ISO 12925‑2 or API GL‑5, accompanied by an independent laboratory analysis report.

How are steel wire ropes typically packaged for export?

Steel wire ropes are usually coiled, placed in sturdy wooden crates or steel drums, banded securely, and marked with the HS code 7312.10 to prevent deformation during sea freight.

What are typical minimum order quantities and lead times for these components?

Minimum order quantities vary; standard parts such as valve assemblies may be ordered in single units, while bulk items like hydraulic oil often require a MOQ of 10 drums (20 L each). Lead times range from approximately 15 days for machined parts to 30‑45 days for assembled equipment.