About Saurabh Flexipack Systems Pvt. Ltd. - Dispensing Systems Supplier in India

Saurabh Flexipack Systems Pvt. Ltd. is an India-based supplier operating in the dispensing and packaging machinery segment, with an active catalogue of 5 listed products. The company's range is built around filling, weighing, and flow-wrapping equipment used on automated packaging lines in food, chemical, and allied processing plants. Its listings sit within the broader category of industrial packaging machinery, a segment that falls under HS code 8422 (machinery for filling, closing, sealing, capsuling or labelling bottles, cans, boxes, bags or other containers) for fillers and HS code 8422 40 / 8428 for wrapping and conveying equipment, depending on the specific machine configuration. The supplier's product set addresses four core packaging functions: dry-product auger dosing, multihead weighing, cup filling, and horizontal flow wrapping. These four machine types together cover the typical end-of-line operations seen in a snack-food, powder, granule, or confectionery plant, where product is first metered by weight or volume, then discharged into a pouch or cup, and finally sealed in a flow-wrap or pre-made bag. Because the equipment is engineered for continuous-duty industrial lines, buyers evaluating this supplier should expect throughput ratings expressed in cycles per minute and container-format flexibility typical of mid-capacity packaging machinery.

Product Range and Specialties of Saurabh Flexipack Systems Pvt. Ltd.

Saurabh Flexipack Systems Pvt. Ltd. lists 5 active products across a single top category, Dispensing Systems. The catalogue comprises a Kawach Survo high speed auger filler, a Contibag (a form-fill-seal bag system), a Kawach Survo Multihead weigher, a Kwach Sarvo cup filler, and a Harizontal (horizontal) flow wrap machine. Together these cover the three principal metering technologies used in modern packaging: volumetric auger dosing for powders and fine granules, multihead combination weighing for piece products and snacks, and cup filling for pre-formed container formats. The horizontal flow wrap machine is the secondary packaging stage, typically fed by the upstream filler or weigher. In the Indian packaging-machinery industry, auger fillers in this class are commonly built for outputs in the 30 to 120 cycles per minute range, with dosing accuracy typically expressed as ±0.5 to ±1 percent by weight, and they handle free-flowing to non-free-flowing powders such as spices, milk powder, flour, and chemical additives. Multihead weighers in the same tier usually carry 10 to 14 weighing heads, run at 60 to 120 weighings per minute, and are paired with bag-makers or vertical form-fill-seal units. Horizontal flow wrappers in this segment typically operate at 80 to 250 packs per minute and accept film widths from roughly 90 mm up to 400 mm, sealing via fin or lap seal. Cup fillers are generally rated for 30 to 90 cups per minute with fill volumes from about 25 ml to 500 ml, depending on the product. Buyers comparing machines in this category should request cycle-rate data, accuracy figures, film or cup format compatibility, and the maximum pack dimensions each unit is rated to handle.

Trade and Export Information - Saurabh Flexipack Systems Pvt. Ltd.

Packaging machinery exported from India typically flows into South-East Asia (Vietnam, Indonesia, the Philippines, Thailand), the Middle East (UAE, Saudi Arabia, Egypt), Africa (Nigeria, Kenya, South Africa, Ethiopia), and Latin America (Brazil, Mexico, Colombia), where mid-capacity food and FMCG processors are scaling up automated lines. Equipment of the type listed by Saurabh Flexipack Systems Pvt. Ltd. is generally classified under HS code 8422 (filling, sealing, capsuling or labelling machinery) for the fillers and weighers, and HS code 8422 40 or 8428 for wrapping and conveying units, with specific subheadings depending on whether the machine is self-contained or part of a linked line. Indian exporters of packaging machinery commonly quote on FOB, CIF, or CFR Incoterms and ship in 20 ft or 40 ft containers, with machines typically crated, fumigated-wooden-box packed, and accompanied by a commercial invoice, packing list, bill of lading, and a CE-marking or BIS compliance certificate where the destination requires it. For machinery in this category, buyers and importing-country regulators typically require conformity to ISO 12100 (general safety of machinery), IEC 60204-1 (electrical safety of industrial machines), and the European Machinery Directive 2006/42/EC where the equipment is destined for the EU. Food-contact applications additionally call for stainless-steel contact parts in 304 or 316 grade, and documentation of food-grade compliance such as FDA or EU 1935/2004 food-contact material declarations. Indian packaging-machinery exporters are also seeing increased demand for machines pre-wired for 415 V / 50 Hz three-phase supplies, with PLC-based controls (typically Siemens or Allen-Bradley) and HMI interfaces, as these specifications match the plant standards in most importing regions. Pre-shipment inspection by a third-party agency such as SGS, TUV, or Bureau Veritas is standard for first-time orders, and many buyers also request a Factory Acceptance Test (FAT) video or on-site witness test before dispatch.

Sourcing from Saurabh Flexipack Systems Pvt. Ltd. - Buyer Guidance

Buyers sourcing from Saurabh Flexipack Systems Pvt. Ltd. should treat the listed 5-product catalogue as the starting point and verify machine-by-machine specifications before issuing a purchase order. Key documents to request include the technical data sheet for each model (throughput in cycles or packs per minute, fill weight or volume range, accuracy class, power consumption in kW, air pressure in bar, and required film or cup format), the general arrangement drawing, the bill of materials for product-contact parts (typically SS 304 or SS 316), and the PLC and HMI make and model. For any machine intended to run food, pharmaceutical, or cosmetic products, buyers should ask for a food-grade or sanitary-build certificate and confirm that contact surfaces meet the relevant destination regulation, such as FDA 21 CFR, EU 1935/2004, or BIS IS standards. Before confirming an order, it is advisable to request a sample run on the supplier's line, either in person or via video, using the buyer's own product where possible, and to agree on a Factory Acceptance Test (FAT) protocol with measurable acceptance criteria. A clear warranty period (commonly 12 months from dispatch or commissioning), a defined spare-parts commitment, and an installation, commissioning, and training plan should be written into the contract. For shipments, buyers should confirm the Incoterm (FOB Mumbai or Mundra, CIF, or CFR), the packing standard (export-worthy wooden crate with ISPM-15 marking), and the lead time, which for made-to-order packaging machinery in India typically runs 45 to 90 days from advance payment. Third-party pre-shipment inspection by SGS, TUV, or Bureau Veritas is recommended for first orders, and CE marking or a declaration of conformity should be requested where the destination market requires it.

What product categories does Saurabh Flexipack Systems Pvt. Ltd. supply?

The supplier lists 5 active products under the Dispensing Systems category, covering auger fillers, multihead weighers, cup fillers, a form-fill-seal bag system, and a horizontal flow wrap machine. These are industrial packaging machines used on food, chemical, and FMCG filling lines.

Which HS codes apply to the machines Saurabh Flexipack Systems lists?

Auger fillers, multihead weighers, and cup fillers generally fall under HS code 8422 (filling, sealing, capsuling or labelling machinery). Horizontal flow wrappers are typically classified under HS code 8422 40 or 8428 depending on configuration. Confirm the exact code with the supplier based on the specific model.

What throughput and accuracy should I expect from an auger filler in this category?

Mid-capacity auger fillers of the type listed typically run at 30 to 120 cycles per minute with dosing accuracy of ±0.5 to ±1 percent by weight, depending on product density and flow characteristics. Request the supplier's actual cycle and accuracy data for your specific product before ordering.

Which certifications and documents should I request before buying?

Ask for a CE declaration of conformity or BIS compliance certificate, ISO 12100 machinery safety documentation, IEC 60204-1 electrical safety compliance, and food-contact material declarations (FDA 21 CFR or EU 1935/2004) where the line will handle food, pharma, or cosmetics. A general arrangement drawing, PLC and HMI specifications, and a bill of materials for contact parts should also be requested.

What is the typical MOQ and lead time for packaging machinery from India?

Packaging machinery of this class is generally built to order, with one machine per order being common for first-time buyers. Lead times for made-to-order equipment from Indian manufacturers typically run 45 to 90 days from advance payment, plus shipping time depending on the destination port.

Which Incoterms and packing standards are standard for Indian packaging machinery exports?

Indian exporters of packaging machinery typically quote on FOB Mumbai or Mundra, CIF, or CFR terms. Machines are usually packed in ISPM-15-compliant fumigated wooden crates with internal foam bracing, and shipped in 20 ft or 40 ft containers depending on the line configuration.

Should I arrange a pre-shipment inspection?

Yes, a third-party pre-shipment inspection by SGS, TUV, or Bureau Veritas is standard practice for first orders of packaging machinery from India. A Factory Acceptance Test (FAT), either on-site or via recorded video using the buyer's product, is also recommended before the machine is dispatched.

Which regions typically import this type of packaging machinery from India?

Indian packaging machinery of this class is commonly exported to South-East Asia, the Middle East, Africa, and Latin America, where mid-capacity food and FMCG processors are investing in automated filling and wrapping lines. Confirm with the supplier which markets they have prior experience shipping to.