About Rajal Ceramic - Ceramic Tiles Supplier in India

Rajal Ceramic is based in India and lists ten active products in its catalogue. The catalogue is organized under the top categories Wall Tiles and Ceramic Tiles and includes items such as 30x60 cm Wall Tiles, 30x90 cm Wall Tiles, 20x60 cm Wall Tiles, 30x45 cm Wall Tiles, Bathroom Tiles, Kitchen Tiles, Exterior Tiles, Elevation Tiles and a generic Ceramic Tiles entry. Each entry refers to a specific size or application class that is common in residential and commercial tiling projects. The supplier’s product list aligns with HS chapter 69, heading 6907, which covers ceramic tiles, glazed or unglazed, for floor and wall covering.

The listed wall‑tile dimensions (e.g., 30 × 60 cm, 30 × 90 cm, 20 × 60 cm, 30 × 45 cm) match standard formats used in the global tile market. Bathroom, kitchen and exterior tiles indicate that the range covers both interior wet‑area applications and outdoor exposure, which typically require different water absorption limits and slip‑resistance ratings. The inclusion of “Elevation Tiles” suggests a focus on façade cladding, a segment that often follows additional fire‑rating and thermal‑expansion specifications. Overall, the catalogue reflects a breadth of formats that buyers in construction, interior design and real‑estate development commonly source.

Product Range and Specialties of Rajal Ceramic

Rajal Ceramic’s catalogue presents a set of ten tile products differentiated by size and intended location. Wall Tiles dominate the list with four precise dimensions, while Bathroom, Kitchen, Exterior and Elevation Tiles address specialised installation contexts. In the ceramic‑tile industry, buyers usually evaluate tiles against ISO 13006 standards, which define dimensions, water absorption, breaking strength and surface characteristics. Typical quality grades are expressed through PEI (Porcelain Enamel Institute) ratings from 1 to 5, with higher numbers indicating greater resistance to abrasion for heavy‑traffic areas such as commercial kitchens or exterior façades. Water absorption values below 0.5 % are common for porcelain‑type tiles, whereas ceramic wall tiles often exhibit absorption up to 3 % depending on the glaze.

Industry practice also distinguishes between glazed and unglazed finishes, matte or polished surfaces, and slip‑resistance classifications (e.g., R9‑R13). Buyers frequently request technical data sheets that list dimensions tolerance (±0.5 mm), thickness (typically 8‑12 mm for wall tiles, 10‑15 mm for floor tiles), and breaking load (often 15‑30 MPa). The product mix shown by Rajal Ceramic therefore covers the standard specifications that architects and contractors specify for residential, hospitality and light‑commercial projects.

Trade and Export Information - Rajal Ceramic

Indian ceramic‑tile exporters generally ship to markets in the Middle East, Europe, North America and South‑East Asia, where demand for both decorative wall tiles and durable floor tiles remains strong. The HS‑code family 6907 governs the customs treatment of these tiles, with duty rates varying by destination country and any applicable free‑trade agreements such as the India‑UAE CEPA. Export shipments are typically packed in wooden pallets or cardboard cartons, with 20‑ft containers holding roughly 1,000  -  1,200 kg of tiles (about 60‑70 m² depending on size) and 40‑ft containers doubling that volume. Common Incoterms used by Indian suppliers include FOB (port of origin, e.g., Kolkata or Mumbai) and CIF for buyers who prefer carrier‑managed freight and insurance.

Regulatory expectations often include a Certificate of Origin, a test report confirming compliance with ISO 13006, and, where required, a CE marking for EU markets. Buyers may also request the supplier’s ISO 9001 quality‑management certification, although such a certificate is not listed in the supplied facts. Packaging must meet ISPM 15 phytosanitary standards when wood pallets are used for international shipments. These trade conventions help streamline customs clearance and ensure that the tiles arrive in good condition for installation.

Sourcing from Rajal Ceramic - Buyer Guidance

When evaluating Rajal Ceramic, buyers should request a product data sheet that details tile dimensions, thickness, water absorption, PEI rating and slip‑resistance class for each listed size. A third‑party laboratory report confirming compliance with ISO 13006 and, where relevant, a glaze durability test will provide additional assurance. Because the catalogue does not specify certifications, buyers are advised to ask for copies of any ISO 9001 or CE documentation the supplier may hold before placing a large order.

Sample tiles should be ordered to verify colour matching, surface finish and dimensional tolerances, especially for façade‑grade Elevation Tiles that may be subject to thermal‑expansion considerations. Verify packaging details such as pallet configuration and whether the tiles are wrapped in moisture‑resistant film, as improper packing can lead to breakage during sea transit. Confirm lead times for production and shipping, and clarify the preferred Incoterm (e.g., FOB Kolkata) to align cost responsibilities.

What tile sizes does Rajal Ceramic list in its catalogue?

The catalogue includes 30 × 60 cm, 30 × 90 cm, 20 × 60 cm and 30 × 45 cm wall‑tile formats, as well as generic Bathroom, Kitchen, Exterior, Elevation and overall Ceramic Tiles entries.

Which HS code applies to the tiles offered by Rajal Ceramic?

All listed tiles fall under HS chapter 69, heading 6907, which covers ceramic tiles, glazed or unglazed, for floor and wall covering.

What industry standards should buyers reference for these tiles?

Buyers should reference ISO 13006 for dimensional and performance specifications, and consider PEI ratings (1‑5) and slip‑resistance classes (R9‑R13) for the intended application.

Are there typical certifications buyers should request from an Indian tile supplier?

Buyers usually request a Certificate of Origin, ISO 9001 quality‑management certification if available, and a test report confirming ISO 13006 compliance; CE marking may be required for EU destinations.

What packaging format is common for shipping ceramic tiles from India?

Tiles are commonly packed in cardboard cartons on wooden pallets, with ISPM 15 treatment applied to pallets for international shipments; moisture‑resistant film is often used to protect the glaze.

What are typical container capacities for the tile sizes listed?

A 20‑ft container can hold roughly 1,000  -  1,200 kg of tiles (approximately 60‑70 m² depending on size), while a 40‑ft container can accommodate about double that volume.

What documentation should be verified before confirming an order?

Buyers should verify a product data sheet, laboratory test report for ISO 13006 compliance, any available ISO 9001 or CE certificates, and the Certificate of Origin for customs clearance.

How can a buyer assess the suitability of Elevation Tiles for façade projects?

Request technical data on water absorption, freeze‑thaw resistance, thermal‑expansion coefficient and any fire‑rating classification, and obtain a sample to evaluate colour consistency and surface finish.