About Qianye Building Jiulongpo Commercial Centre Chongqing City - Diesel Generators Supplier in China

Qianye Building Jiulongpo Commercial Centre Chongqing City is located in the Jiulongpo district of Chongqing, China. The supplier lists 15 active diesel generator products, all classified under the HS code families 8502.13 and 8502.12. The catalogue includes water‑cooled and three‑phase units ranging from 3 kW to 300 kW. Materials commonly cited are steel housing, cast‑iron engine blocks, and copper windings. The product descriptions reference engine makes such as Cummins, SDEC and Dcec.

The listings cover power outputs of 30 kW, 50 kW, 80 kW, 100 kW, 120 kW, 150 kW, 200 kW, 250 kW and 300 kW, with both standard and ISO‑approved configurations. Each generator set combines a diesel engine with an alternator, housed in steel frames and equipped with cooling systems (water‑cooled or air‑cooled). The catalogue explicitly notes the use of copper windings in the alternators and cast‑iron blocks for the engines, matching typical construction for industrial diesel generators.

Product Range and Specialties of Qianye Building Jiulongpo Commercial Centre Chongqing City

In the diesel generator market, units are evaluated against ISO 8528 performance classes (A‑E) and IEC 60034 rotating‑machine standards. Typical specifications include a three‑phase 400 V output, 50 Hz or 60 Hz frequency, power factor 0.8 lag, and fuel consumption between 0.22 L/kWh (high‑efficiency) and 0.35 L/kWh (standard). Emission compliance commonly follows EPA Tier 2 or Euro III/IV standards, and noise levels are usually limited to 75 dB(A) at 7 m. Buyers often request documentation such as type‑test certificates, ISO 9001 quality system certification, and CE marking for equipment intended for EU markets.

Trade and Export Information - Qianye Building Jiulongpo Commercial Centre Chongqing City

Chinese diesel generator exporters typically ship to Southeast Asia, the Middle East, Africa and Latin America, where construction, mining and backup‑power sectors drive demand. The HS 8502.13 code covers most of the listed sets, while lower‑capacity models under 1 kW fall under 8502.12. Importers usually require CE conformity, ISO 9001 quality certification and, for emission‑sensitive markets, EPA or Euro emission test reports. Standard logistics involve loading the steel‑framed sets on wooden pallets into 20‑ft or 40‑ft containers, with FOB or CIF terms most common. Chinese manufacturers often provide factory‑acceptance‑test (FAT) reports and pre‑shipment inspection certificates to satisfy buyer audits.

Sourcing from Qianye Building Jiulongpo Commercial Centre Chongqing City - Buyer Guidance

When sourcing from this supplier, request the specific engine model data sheet, rated power, voltage, frequency, fuel consumption and emission class. Verify that the generator complies with ISO 8528 and IEC 60034 standards and ask for a CE declaration or equivalent third‑party test report. It is prudent to obtain a copy of the supplier’s ISO 9001 certificate and any emission test results relevant to the target market. Typical minimum order quantities start at a single unit for standard models, with lead times of 4 - 6 weeks for non‑customized sets; customized control panels or enclosure options can extend the lead time. Confirm packaging details - steel frame, wooden pallet, container dimensions - and clarify Incoterms before finalising the purchase.

What power outputs are available in the catalogue?

The supplier lists diesel generator sets from 3 kW up to 300 kW, including 30 kW, 50 kW, 80 kW, 100 kW, 120 kW, 150 kW, 200 kW, 250 kW and 300 kW models. Both water‑cooled and air‑cooled versions are offered, with three‑phase output at 400 V.

Which HS codes apply to these generators?

Most of the units are classified under HS 8502.13, which covers diesel generator sets of higher capacity. A few lower‑capacity models are listed under HS 8502.12.

What certifications should a buyer request?

Buyers should ask for ISO 9001 quality system certification, CE marking for EU compliance, and any emission test reports such as EPA Tier 2 or Euro III/IV. Type‑test certificates that reference ISO 8528 and IEC 60034 are also standard.

What is the typical lead time for an order?

For standard, non‑customized generator sets the lead time is usually 4 to 6 weeks after order confirmation. Custom control panels or special enclosures may add 2 - 4 weeks to the schedule.

How are the generators packaged for export?

Units are mounted on steel frames, secured on wooden pallets, and loaded into 20‑ft or 40‑ft containers. Shipping terms are commonly FOB or CIF, depending on buyer preference.

Can I obtain a performance test report before purchase?

Yes, the supplier can provide a factory‑acceptance‑test (FAT) report that includes load‑bank test results, fuel consumption, noise level and emission data for the specific model.

Which regions are the main import markets for Chinese diesel generators?

Major destinations include Southeast Asian countries such as Vietnam and Thailand, Middle Eastern markets like Saudi Arabia, African nations such as Kenya, and Latin American countries including Brazil.

What warranty terms are typical for these generators?

Standard warranty provisions often include a 12‑month parts guarantee and a 24‑month labor guarantee, with optional extensions available through the supplier.