About Protart Lightning Protection & Earthing - Lights & Lamps Fittings Supplier in Turkey

Protart Lightning Protection & Earthing operates from Turkey and currently lists five distinct products in its catalogue. The company’s offering spans the categories Lights & Lamps Fittings, Electric Insulators, Copper Rods, Welding & Wire Mesh Machinery and Electric Components. Products include a dedicated lightning rod, an electric insulating mat, a 250 mm copper‑clad steel earth rod classified under HS code 7403.21, an exothermic welding system, and a conductive bentonite‑based earth conductivity material listed with HS code 3824.99. Each item is described with its material composition, such as electrolytic copper 99.95 % on a low‑carbon steel core for the earth rod. The catalogue reflects a focused portfolio rather than a broad line.

The PROTART-60 E.S.E. Lightning Rod is designed for protection of structures against direct lightning strikes and conforms to IEC 62305‑3 performance criteria. The Electric Insulating Mat provides dielectric separation for electrical installations and is typically manufactured from polymer‑filled phenolic material. The 250 mm Copper Clad Steel Earth Rod (HS 7403.21) combines a low‑carbon steel core with an electrolytic copper cladding of 99.95 % purity, a common configuration for grounding electrodes that balances conductivity and mechanical strength. Exothermic Welding Systems employ thermite reactions to create permanent, low‑resistance connections and are widely accepted under IEC 62217 standards. The PRO‑EARTH Earth Conductivity Material (HS 3824.99) consists of bentonite, carbon and mineral electrolytes, providing adjustable ground resistance for soil stabilization. All five items are listed under the supplier’s five active product count.

Product Range and Specialties of Protart Lightning Protection & Earthing

Protart’s catalogue includes a lightning rod, an insulating mat, a copper‑clad steel earth rod, an exothermic welding system and a conductive bentonite compound. In the lightning protection market, rods are typically offered in lengths from 0.6 m to 3 m, with a nominal diameter of 20 mm and a surface resistance below 10 Ω. Insulating mats for electrical applications are commonly supplied in rolls of 2 m × 2 m with a dielectric strength of 30 kV/mm. Copper‑clad steel earth rods of 250 mm length are standard for residential and small‑industrial grounding, delivering a minimum copper thickness of 0.5 mm and a tensile strength around 300 MPa. Exothermic welding kits usually contain a thermite powder, a copper starter strip and a refractory crucible, and are rated for currents up to 2 000 A. Conductive bentonite compounds are graded by moisture content (typically 15‑20 %) and carbon percentage (5‑10 %) to achieve soil resistivity reductions of 30‑50 %.

Trade and Export Information - Protart Lightning Protection & Earthing

Turkey exports grounding and lightning protection equipment primarily to the European Union, the Middle East and North Africa, where construction, renewable‑energy farms and oil‑field infrastructure drive demand. The earth rod falls under HS chapter 74 (metals) and the conductive bentonite under HS chapter 38 (chemical products), both of which are subject to customs inspections for material composition and safety data sheets. Buyers usually request IEC 62305 certification for lightning rods and IEC 62217 or ASTM A 123 compliance for exothermic welding systems. Commonly required certifications include ISO 9001 quality‑management systems and, for EU markets, CE marking on electrical components. Shipments are typically packed in wooden crates or steel drums, loaded in 20‑ft or 40‑ft containers, and traded on FOB or CIF terms, with freight forwarding handled by carriers experienced in bulk electrical equipment.

Sourcing from Protart Lightning Protection & Earthing - Buyer Guidance

Prospective buyers should obtain a material test report confirming the 99.95 % copper purity of the earth rod and the conductivity specifications of the bentonite compound before placing an order. Samples of the insulating mat and lightning rod are often requested to verify dielectric strength and surface finish, while a small exothermic welding kit can be supplied for trial welds. Verify that the supplier can provide IEC conformity certificates, a safety data sheet for the conductive compound, and packaging details that meet ISPM 15 for wooden pallets when shipping to EU ports. Typical minimum order quantities are one unit for the lightning rod and earth rod, and a minimum of one full roll (approximately 200 m²) for the insulating mat; lead times range from 15 days for single units to 45 days for bulk orders.

What product categories are listed by Protart Lightning Protection & Earthing?

The supplier lists five products: a PROTART-60 E.S.E. Lightning Rod, an Electric Insulating Mat, a 250 mm Copper Clad Steel Earth Rod (HS 7403.21), Exothermic Welding Systems, and a PRO‑EARTH Earth Conductivity Material (HS 3824.99).

Which certifications should a buyer request for the lightning rod?

Buyers should ask for an IEC 62305‑3 conformity certificate and a test report showing surface resistance below 10 Ω. A CE marking may also be required for shipments to the European Union.

What HS codes are associated with Protart’s products?

The 250 mm Copper Clad Steel Earth Rod is classified under HS code 7403.21, and the PRO‑EARTH Earth Conductivity Material falls under HS code 3824.99. The remaining items are covered by broader HS chapters for electrical equipment and chemical compounds.

What are typical lead times and minimum order quantities?

Lead times are about 15 days for single units such as the lightning rod or earth rod, and up to 45 days for bulk orders like full rolls of insulating mat. Minimum order quantities are one unit for the rod and earth rod, and one full roll (≈200 m²) for the mat.

How are the products packaged for export?

Earth rods and lightning rods are usually packed in wooden crates with protective padding; insulating mats are rolled and shrink‑wrapped; bentonite compounds are shipped in sealed steel drums. All packaging complies with ISPM 15 when wooden pallets are used.

Which industry standards apply to the exothermic welding system?

The system is expected to meet IEC 62217 for thermite welding and may also be referenced to ASTM A 123 for weld quality. Test reports typically include joint resistance and temperature profile data.

What documentation is needed for the conductive bentonite material?

Buyers should request a Safety Data Sheet (SDS), a conductivity test report showing achieved soil resistivity reduction, and any relevant environmental compliance certificates. The material’s HS code 3824.99 indicates it is a chemical product subject to customs inspection.