About Ningbo Yize Sanitary Ware Co., Ltd. - Bathroom Accessories Supplier in China

China hosts Ningbo Yize Sanitary Ware Co., Ltd., which lists ten distinct bathroom and shower drainage products in its catalogue. The catalogue is organized under the categories Bathroom Accessories and Shower Accessories, and the items are primarily stainless‑steel drains and associated grates. Four of the ten entries carry HS code 7324.90, covering other articles of iron or steel, while one entry uses HS code 7418.20 for a stainless‑steel component with a tempered‑glass grate. Materials specified include stainless‑steel grades 304 and 316, tempered glass panels, and engineered stone covers.

The product list includes a Bathroom Accessory Shower Drain, Stainless Steel Shower Drain, Bathroom Linear Shower Drain, quality Shower Drain, quality Stainless Steel Floor Drain, Stainless Steel Linear Shower Drain, quality Shower Channel Grate for Bathroom, Stainless Steel 304 Shower Drain, Bathroom Shower Floor Drain, and Shower Room Floor Drain. Where HS codes are provided, they correspond to the stainless‑steel drain bodies (7324.90) and the linear drain with glass grate (7418.20). All items are described as using stainless‑steel 304 or 316, with some models featuring tempered‑glass or engineered‑stone covers.

Product Range and Specialties of Ningbo Yize Sanitary Ware Co., Ltd.

The catalogue focuses on stainless‑steel drainage solutions for residential and commercial bathrooms. Products such as linear shower drains and floor drains are commonly fabricated from grade 304 stainless steel for general corrosion resistance, while grade 316 is selected for environments with higher chloride exposure. Tempered‑glass grates meet impact‑resistance standards comparable to EN 124 for safety, and engineered‑stone covers are typically composed of a cement‑based composite complying with ASTM C1157 for durability.

In the broader sanitary‑ware market, drainage components are offered in standard dimensions ranging from 150 mm to 250 mm width, with flow capacities of 3 - 10 L s⁻¹, and are often supplied with gasket seals meeting ISO 4425. Buyers frequently specify surface finishes such as polished or brushed stainless steel, and may request anti‑corrosion treatments like passivation. The inclusion of HS codes 7324.90 and 7418.20 aligns the products with the global tariff classification for metal sanitary fittings.

Trade and Export Information - Ningbo Yize Sanitary Ware Co., Ltd.

China is a major exporter of stainless‑steel bathroom fittings, and products classified under HS 7324.90 and 7418.20 are routinely shipped to markets in the European Union, North America, the Middle East, and Southeast Asia. Export shipments are generally packed in cardboard boxes on wooden pallets, allowing loading into 20‑foot or 40‑foot containers with typical net weights of 500 - 800 kg per container for the listed drain items.

Importers commonly require conformity to CE marking for European sales and may request test reports such as ASTM A240 for material composition, EN 1090 for fabrication, and EN 12056 for drainage performance. Additional documentation often includes a mill test report (MTR), a declaration of conformity, and a safety data sheet for any coating or sealant used. Logistics for these metal fittings usually follow FOB or CIF terms, with customs clearance facilitated by the HS code classification and accompanying product specifications.

Sourcing from Ningbo Yize Sanitary Ware Co., Ltd. - Buyer Guidance

When sourcing from Ningbo Yize, buyers should request the stainless‑steel grade certification (e.g., ASTM A240 or EN 10088) and a mill test report for each drain model. Verification of the tempered‑glass grate should include impact resistance test results meeting EN 124, while engineered‑stone covers should be accompanied by compressive strength data per ASTM C1157.

Typical order quantities for stainless‑steel bathroom drains range from 500 to 2 000 units, with lead times of 30 - 45 days after sample approval. Buyers are advised to confirm packaging dimensions, pallet configuration, and container loading plans, and to obtain a product conformity declaration aligned with the target market’s regulatory requirements before shipment.

What material grades are used in the drains?

The catalogue specifies stainless‑steel grade 304 for most items and grade 316 for models intended for higher‑corrosion environments; the linear drain with glass grate also uses grade 304.

Which HS codes apply to the products?

Four of the listed drains and the channel grate are classified under HS 7324.90, while the stainless‑steel linear shower drain with tempered‑glass grate uses HS 7418.20.

Are samples available before placing a bulk order?

Buyers can request a physical sample of any listed drain model; standard practice is to receive a sample within 7 - 10 business days after the request.

What certifications should I request from the supplier?

Typical certifications include a mill test report for the stainless‑steel, CE conformity for EU markets, and any applicable ASTM or EN test reports for material and performance.

What are the common packaging and shipping methods?

Products are packed in cardboard boxes on wooden pallets, suitable for loading into 20‑foot or 40‑foot containers; FOB and CIF terms are commonly used.

What is the usual minimum order quantity and lead time?

MOQ generally starts at 500 units per product, with a production lead time of 30 - 45 days after sample approval.

How is the performance of the drainage system verified?

Buyers normally request flow‑rate test data complying with EN 12056 and corrosion‑resistance test results for the stainless‑steel components.

Can the grates be customized in finish or size?

The supplier offers polished or brushed stainless‑steel finishes and can adjust grate dimensions within standard size ranges, subject to a tooling surcharge.