About Ningbo Xinhao Hardware Tools Factory - Industrial Pumps Supplier in China

Ningbo Xinhao Hardware Tools Factory is located in Ningbo, Zhejiang Province, China and lists seven active products across its catalogue. The company groups its offerings under top categories that include Industrial Pumps, Tools & Instruments, Electric Motors, Capacitors, Garden Tools, Bearing and Gloves. Each product is identified by its generic name and, where applicable, an HS‑code family such as 8532 for capacitors and 8482 for bearings. The catalogue reflects a mix of mechanical and electrical hardware that is typical for manufacturers serving industrial and consumer markets. Export activity is indicated by the supplier’s harbor trust tier, suggesting participation in maritime shipping channels.

The catalogue contains a Pump, a Keel (a hand‑tool component), an Electric Motor, a Capacitor listed with HS code 8532.29 and mixed dielectric materials, a Garden tool, a Bearing listed with HS code 8482.10 and steel variants, and a Glove. No additional HS codes are provided for the Pump, Keel, Motor, Garden tool or Glove. Material specifications are detailed for the Bearing, noting chrome steel (GCr15/AISI 52100), stainless steel 440C/304 and carbon steel with a polyamide cage. The product set therefore spans fluid handling equipment, power transmission components, electronic parts, hand tools, agricultural implements and personal protective equipment.

Product Range and Specialties of Ningbo Xinhao Hardware Tools Factory

The Pump entry aligns with the industrial pump category, which in global trade is usually classified under HS chapter 84 (e.g., 8413 for centrifugal pumps). Buyers typically look for performance data such as flow rate (m³/h), head (m), and material of construction - stainless steel or cast iron are common grades. The Keel and Garden tool fall under the tools & instruments segment, where HS chapter 82 covers hand tools; standard specifications include tool length, steel grade (often high‑carbon or alloy) and ergonomic design. The Electric Motor is generally classified under HS 8501 and is evaluated by power rating (kW), voltage, efficiency class (IE3 or higher) and frame size. Capacitors in HS 8532 are supplied with dielectric types - ceramic, electrolytic or film - and are commonly tested for capacitance (µF), voltage rating (V), leakage current and compliance with IEC 60384. Bearings under HS 8482 are described by bearing type (ball, roller), bore diameter (mm), load rating (C0) and material heat treatment; the listed steel grades correspond to high‑precision bearing standards. Gloves are typically in HS 6116 and are assessed for material (nitrile, leather, PVC), thickness (mm), tensile strength and compliance with EN 388 or ISO 13997 for cut resistance.

Trade and Export Information - Ningbo Xinhao Hardware Tools Factory

China is a leading exporter of industrial hardware, and Ningbo’s port provides direct maritime routes to Europe, North America and Southeast Asia. Pumps, motors and bearings from China are commonly shipped in 20‑ft or 40‑ft containers, with protective wooden crates or steel pallets used for heavy items. Capacitors are often packed in anti‑static cardboard boxes, complying with IEC 60950 safety standards and may require CE marking for EU markets. Typical import requirements include the commercial invoice, packing list, certificate of origin and, where applicable, test reports such as CE Declaration of Conformity for electrical components or ISO 9001 quality system certificates. Buyers from the automotive sector, renewable‑energy projects and construction equipment manufacturers frequently source these categories. Standard Incoterms used by Chinese exporters are FOB Ningbo or CIF major ports, with freight forwarding agents handling customs clearance in the destination country.

Sourcing from Ningbo Xinhao Hardware Tools Factory - Buyer Guidance

When sourcing the Pump, request flow‑rate curves, material certification (e.g., ASTM A216 for cast iron) and pressure‑test reports to verify compliance with ISO 9906. For the Motor, ask for a name‑plate data sheet, efficiency test results (IE3 or higher) and a CE Declaration of Conformity. Capacitor buyers should obtain a dielectric loss factor report, voltage withstand test results and proof of RoHS compliance. Bearing purchasers need to see dimensional drawings, load rating tables and a material analysis report confirming the claimed steel grades. For Garden tools and the Keel, request product drawings, steel grade certificates and surface‑treatment specifications (e.g., zinc coating thickness). Gloves should be accompanied by material safety data sheets and test certificates for cut, puncture and chemical resistance. In all cases, verify that the supplier can provide ISO‑9001 audit reports or equivalent quality‑system documentation before confirming large orders.

What product categories does Ningbo Xinhao Hardware Tools Factory list in its catalogue?

The catalogue includes a Pump, a Keel (hand‑tool component), an Electric Motor, a Capacitor (HS 8532.29), a Garden tool, a Bearing (HS 8482.10) and a Glove.

Which HS codes are provided for the supplier’s products?

The Capacitor is listed with HS code 8532.29 and the Bearing with HS code 8482.10. No HS codes are supplied for the Pump, Keel, Motor, Garden tool or Glove.

What material specifications are given for the Bearing?

The Bearing material is described as Chrome Steel (GCr15 / AISI 52100), Stainless Steel 440C / 304 and Carbon Steel with a polyamide cage.

What dielectric materials are used in the Capacitor?

The Capacitor uses a mixed dielectric composition that may include ceramic, electrolytic and film types, as stated in the catalogue.

What typical certifications should a buyer request for the Capacitor?

Buyers should request a CE Declaration of Conformity, RoHS compliance certificate and IEC 60384 test reports for capacitance, voltage rating and leakage current.

What are common packaging methods for the Pump and Bearing when shipped from China?

Pumps are usually crated in wooden boxes with internal bracing, while Bearings are packed in sealed cardboard cartons with moisture‑absorbing packets, both placed on standard Euro pallets for container loading.

What Incoterms are frequently used by this supplier for international shipments?

Export transactions from Ningbo commonly use FOB Ningbo or CIF to the buyer’s destination port, allowing the buyer to arrange freight or receive a delivered‑cost arrangement.

What documentation is typically required before importing the Glove from this supplier?

Importers should obtain a material safety data sheet, EN 388 or ISO 13997 test certificate for cut resistance, and a commercial invoice with HS code 6116 for customs clearance.