About Ningbo Landlink Industrial Technology Co.,Ltd. - Faucets Supplier in China

Ningbo Landlink Industrial Technology Co.,Ltd. is based in China and lists 14 active products across four categories: Faucets, Shower Accessories, Industrial Valves & Gauges, and Bathroom Accessories. The catalogue includes various faucet designs such as double‑handle, single lever, thermostatic, hotel, sink and wholesale models, as well as a sliding bar and a valve product. The supplier’s product set reflects typical hardware used in residential, commercial and hospitality plumbing installations. Geographic focus is not specified, but the listed items are commonly exported from Chinese manufacturing hubs.

Among the 14 items, the Double Handle Faucet AD0075 is recorded with HS code 8481.80 and is made of solid brass containing 58‑62 % copper. Other entries such as Single Lever Faucet, Thermostatic Mixer and Shower Sliding Bar are described without material or HS details in the source data. The catalogue also mentions a Slinding Bar CHL009, Bathroom Faucet and various wholesale faucet listings, indicating a breadth of standard plumbing fittings. Products are presented without explicit packaging or certification information, leaving verification to the buyer. All items fall under the broader HS 8481 family for taps and faucets.

Product Range and Specialties of Ningbo Landlink Industrial Technology Co.,Ltd.

The supplier’s catalogue covers brass‑based faucets (solid brass, copper 58‑62 %), lever‑type and thermostatic mixers, as well as a shower sliding bar and a generic valve. In the broader market, faucets are classified under HS chapter 84, commonly HS 8481, with grades ranging from standard commercial brass (often ASTM B16) to premium lead‑free finishes meeting NSF/ANSI 61. Thermostatic mixers typically comply with ISO 9001 quality systems and may carry CE marking for EU markets. Shower accessories such as sliding bars are usually supplied in stainless steel or chrome‑plated finishes, meeting ASTM A240 or EN 12452 standards.

Industrial valves and gauges listed under the broader category often fall under HS 8482 and are fabricated from cast iron, bronze or stainless steel, with pressure ratings expressed in MPa. Buyers often request material test certificates and pressure‑test reports. The range of bathroom accessories complements the faucet line, and standard dimensions (e.g., 3‑hole mounting, 1‑inch inlet/outlet) are typical specifications in this segment.

Trade and Export Information - Ningbo Landlink Industrial Technology Co.,Ltd.

Chinese manufacturers of plumbing fixtures typically export to Europe, North America, the Middle East and Southeast Asia, where building‑code compliance drives demand for CE, UL or NSF certification. HS code 8481.80 covers brass faucets and is subject to customs inspection for material composition and lead content, especially under EU REACH regulations. Export shipments are commonly packed in wooden crates or bulk cartons, with 20‑ft containers holding up to 1,500 units depending on packaging.

Incoterms such as FOB Ningbo or CIF destination port are standard for these goods. Importers usually request a Certificate of Origin, material test report, and compliance declaration for water safety standards. China's domestic production of brass fixtures benefits from a mature supply chain, allowing steady lead times of 30‑45 days from order confirmation to shipment.

Sourcing from Ningbo Landlink Industrial Technology Co.,Ltd. - Buyer Guidance

When sourcing faucets or valves from this supplier, buyers should request a material test report confirming copper content (58‑62 %) for brass items and a lead‑free certification if required by the destination market. Samples should be evaluated for flow rate (e.g., 8‑12 L/min), pressure rating (typically 0.5‑1 MPa for residential faucets) and finish quality (chrome plating thickness, usually ≥ 0.5 µm).

Verification of compliance documents such as CE Declaration of Conformity, NSF/ANSI 61 test results, or ISO 9001 quality system certificates is advisable before confirming bulk orders. Confirm packaging dimensions, container loading plans and the supplier’s preferred Incoterm to avoid unexpected freight costs.

What HS code applies to the Double Handle Faucet AD0075?

The Double Handle Faucet AD0075 is listed under HS code 8481.80, which covers brass faucets and similar plumbing fittings.

What material is used for the Double Handle Faucet?

It is made of solid brass with a copper content of 58‑62 % as specified in the catalogue.

Which certifications should I request for Chinese faucet suppliers?

Buyers typically ask for CE marking, NSF/ANSI 61 water safety certification, and a material test report confirming lead‑free status and copper content.

What standard flow rate should I expect from a residential faucet?

Residential faucets commonly deliver 8‑12 liters per minute at a standard water pressure of 0.5‑1 MPa.

How are the faucets usually packaged for export?

Faucets are generally packed in bulk cartons with protective padding, loaded into 20‑ft or 40‑ft containers, and shipped under FOB Ningbo or CIF terms.

What is a typical lead time for an order of 1,000 faucet units?

Lead times from Chinese manufacturers are usually 30‑45 days from order confirmation to shipment, depending on production scheduling and sample approval.

Are shower sliding bars subject to any specific standards?

Shower sliding bars are often made of stainless steel or chrome‑plated metal and should comply with ASTM A240 or EN 12452 for corrosion resistance and load‑bearing capacity.

What documentation is needed for customs clearance of HS 8481.80 items?

Customs generally require a Commercial Invoice, Packing List, Certificate of Origin and, if applicable, a material composition test report for brass fittings.