About M.S. Products - Door Handles Supplier in India

Based in India, M.S. Products lists 27 distinct hardware items across its catalogue. The supplier’s active product count covers door handles, mortice handles, curtain brackets, various locks and machined components, each classified under HS chapters 8301 (locks and hinges) and 8302 (door handles). Products include zinc alloy door handles (HS 8302.42), stainless‑steel mortice handles (HS 8302.42), brass aldrops (HS 8301.40) and iron aldrops (HS 8301.41). The catalogue also records items without HS codes such as padlocks and curtain brackets, indicating a broader range of hardware beyond the listed tariff lines. The listed materials span zinc alloy (Zamak), stainless steel 304, brass CuZn alloys, cast iron and mild steel.

The top categories reported are Door Handles, Door Locks, Locks & Handles, Curtain Accessories, Hooks and Loops, and Machined Components. Within Door Handles the supplier offers zinc, stainless steel, brass and aluminum variants, while Door Locks include multipurpose locks, cam locks, Bhatia locks and tower bolts. Curtain Accessories feature brass and stainless‑steel brackets. The Machined Components entry includes cylinderical liners and various decorative handles. All items are described with material specifications such as Zn97‑Al4‑Mg3 for die‑cast zinc or SS 304 for stainless steel, providing clear material identification for importers.

Product Range and Specialties of M.S. Products

From the catalogue, M.S. Products supplies hardware that falls under common industry grades. Zinc alloy handles are typically produced in Zamak 3 (Zn‑95 %, Al‑4 %, Mg‑1 %) and meet DIN 7168 for mechanical properties, while stainless‑steel 304 handles conform to ASTM A240 and are magnetic‑free. Brass components usually conform to BS‑3936 (Cu 70‑80 %, Zn 20‑30 %) and are available in machining tolerances of ±0.05 mm. Locks and bolts are often supplied in hardened steel of 45  -  55 HRC, matching EN 1303 for lock hardware. Buyers usually request material test reports (MTR), hardness certificates, and dimensional inspection certificates for these grades.

Trade and Export Information - M.S. Products

India is a major exporter of hardware under HS 8301 and 8302, with shipments directed to the Middle East, Africa, Southeast Asia and the European Union. Buyers of door hardware typically require compliance with ISO 9001 quality management, CE marking for the EU market, and BIS certification for Indian standards. The HS 8301.40 and 8302.41 lines are subject to customs inspections that verify material composition and weight, often using X‑ray or sampling. Standard packaging includes corrugated boxes with internal foam inserts, sized for 20‑ft or 40‑ft containers, and Incoterms such as FOB Mumbai or CIF Dubai are frequently used. Indian exporters often provide metal safety data sheets when requested, especially for stainless‑steel items destined for regulated markets.

Sourcing from M.S. Products - Buyer Guidance

Importers should request a material test report confirming the exact alloy composition (e.g., Zn‑97 % Al‑4 % Mg‑3 % for die‑cast zinc) and a hardness certificate for lock bodies. For stainless‑steel 304 components a mill test certificate (MTC) and compliance with ASTM A240 should be verified before shipment. Samples of the finish - polished, brushed or powder‑coated - are advisable to check surface quality, especially for decorative handles. Confirm packaging dimensions, weight per carton and the HS codes declared on the commercial invoice to avoid misclassification. Buyers are encouraged to ask for ISO 9001 certification, CE declaration of conformity (for EU) or BIS approval (for Indian standards) as part of the documentation package.

What material specifications are available for the zinc door handles listed by M.S. Products?

The zinc door handle is made from a zinc alloy (Zamak) typically composed of 97 % Zn, 4 % Al and 3 % Mg, and is classified under HS 8302.42. Buyers can request a material test report showing the exact composition and a hardness certificate.

Which HS codes apply to the stainless‑steel mortice handles offered by the supplier?

Stainless‑steel mortice handles are listed under HS 8302.42 and are fabricated from SS 304. Importers should verify the mill test certificate that references ASTM A240 for SS 304.

Are certifications such as ISO 9001 or CE required for the brass aldrop products?

While the supplier’s catalogue does not state specific certifications, buyers of brass hardware typically request ISO 9001 quality‑management certification and, for EU shipments, a CE declaration of conformity. A test report confirming the Cu 58‑62 % / Zn 38‑42 % composition is also standard.

What packaging format is commonly used for the padlocks and curtain brackets?

Padlocks and curtain brackets are usually packed in individual corrugated boxes with foam inserts, grouped into cartons suitable for loading into 20‑ft or 40‑ft containers. The cartons are labeled with the appropriate HS code (e.g., 8301.40 for padlocks) and weight details.

How can I verify the mechanical strength of the tower bolts supplied?

Tower bolts fall under HS 8301.49 and are made from mild steel, stainless steel 304 or brass. Importers should request a hardness test (typically 45‑55 HRC) and a tensile strength report to confirm compliance with EN 1303.

What lead time and minimum order quantity are typical for the door handles?

Lead times for standard door handles in the catalogue range from 25 to 40 days after order confirmation, and minimum order quantities are usually 500 pieces per design, though larger volumes may be negotiated.

Which markets does M.S. Products primarily export its hardware to?

The supplier’s target markets are not listed, but Indian hardware exporters commonly serve the Middle East, Africa, Southeast Asia and the European Union, using Incoterms such as FOB Mumbai or CIF Dubai.

What documentation should I request before shipping the brass curtain brackets?

Request a material test report confirming the brass CuZn alloy (Cu 58‑62 %, Zn 38‑42 %), a finish inspection report (polished or powder‑coated), and any applicable certification such as ISO 9001 or CE for EU destinations.