About Linyi Xinshengyang Plastic Co., Ltd. - Stone Slabs Supplier in China

Linyi Xinshengyang Plastic Co., Ltd. is located in China and currently lists eight active products. The catalogue focuses on engineered quartz stone slabs, which fall under HS chapter 68, specifically HS code 6810.19 for several items. Products include a Base Color Quartz Stone Slab, a Pure White Quartz Stone Slab sized 3.2 × 1.6 m, and a Multi Color Quartz Stone Slab among others. The supplier also provides slabs described as Carrara Hot Design, Calacatta, and a generic Quartz Stone Slab without a listed HS code. Materials are reported as engineered quartz containing 90‑96 % natural quartz combined with 4‑7 % polyester or acrylic resin binders.

The eight entries comprise both dimension‑specific slabs, such as the 3.2 × 1.6 m Pure White version, and design‑focused slabs like the Newest Design and Carrara Hot Design. Two products explicitly cite HS code 6810.19 and detail material composition, confirming the use of high‑percentage quartz aggregate with resin binders. The remaining items are listed without HS codes but are identified as quartz stone slabs, indicating they belong to the same engineered stone family.

Product Range and Specialties of Linyi Xinshengyang Plastic Co., Ltd.

The catalogue covers engineered quartz stone slabs that are typically produced in thicknesses ranging from 20 mm to 30 mm and finished with polished, honed, or leathered surfaces. In the industry, quartz slabs contain 90‑96 % natural quartz and 4‑6 % polymer resin, matching the material percentages disclosed for the supplier’s items. Common quality grades include commercial grade (suitable for residential flooring) and premium grade (used for high‑end interior design), with standards such as ASTM C615 (Standard Specification for Engineered Stone) and EN 14564 (Quartz Surface Materials) applied to verify hardness, flexural strength, and water absorption (<0.5 %). Typical slab dimensions are 3 m × 1.5 m, 2.5 m × 1.2 m, and the 3.2 × 1.6 m size listed in the catalogue, and they are shipped in wooden crates that protect the surface during transport.

Trade and Export Information - Linyi Xinshengyang Plastic Co., Ltd.

China is a leading exporter of engineered quartz slabs, and products classified under HS 6810.19 are routinely shipped to North America, the European Union, and the Middle East for use in residential and commercial construction. Buyers generally require compliance with ISO 9001 quality‑management systems, CE marking for the European market, and NSF/ANSI 51 certification for food‑service applications. Standard export packaging includes double‑layered wooden crates, each crate holding 1‑2 slabs depending on thickness, with pallets sized for 20‑ft and 40‑ft containers; a full 20‑ft container can accommodate roughly 10‑12 slabs. Chinese exporters often provide a mill test report, material safety data sheet (MSDS), and a certificate of origin to satisfy customs and buyer due‑diligence requirements.

Sourcing from Linyi Xinshengyang Plastic Co., Ltd. - Buyer Guidance

When sourcing quartz slabs from this supplier, request a mill test report that details compressive strength (typically >150 MPa), water absorption, and resin content. Ask for a material safety data sheet to verify the type of polymer binder, as some buyers prefer polyester over acrylic for lower VOC emissions. Verify the slab dimensions, thickness, and surface finish against project specifications, and confirm that the supplier can provide CE or ISO certificates if required for the target market. Sample requests should specify a 600 mm × 600 mm piece with the intended finish, and most suppliers set a minimum order of one 20‑ft container or a defined number of slabs per shipment. Lead times for Chinese engineered quartz typically range from 30 to 45 days after order confirmation, subject to production scheduling and export documentation.

What HS code is used for the quartz slabs listed by Linyi Xinshengyang Plastic Co., Ltd.?

Two of the listed slabs carry HS code 6810.19, which covers "Other ornamental stone, including manufactured, not elsewhere specified" and is the standard classification for engineered quartz slabs.

What is the typical quartz content in the supplier’s engineered stone slabs?

The catalogue specifies quartz contents of 90‑96 % natural quartz, combined with 4‑7 % polyester or acrylic resin binder, which aligns with industry norms for engineered quartz.

Which surface finishes are commonly available for these quartz slabs?

Buyers usually receive polished, honed, or leathered finishes; the supplier’s design‑focused slabs such as Carrara Hot Design and Calacatta are typically offered with high‑gloss polished surfaces.

What documentation should a buyer request before placing an order?

Typical documents include a mill test report, material safety data sheet (MSDS), certificate of origin, and any applicable certifications such as ISO 9001 or CE marking.

How are the slabs packaged for international shipment?

Standard practice is to pack each slab in a double‑layered wooden crate with protective padding, then palletize the crates for loading into 20‑ft or 40‑ft containers.

What are the common minimum order quantities for these quartz slabs?

Exporters often set a minimum order equivalent to one 20‑ft container, which can hold roughly 10‑12 slabs depending on thickness, or a specific number of slabs as agreed with the buyer.

What lead time can a buyer expect from order confirmation to shipment?

Lead times from Chinese manufacturers for engineered quartz slabs generally range from 30 to 45 days, depending on production scheduling and export paperwork.

Which markets typically import engineered quartz slabs from China?

Major import markets include the United States, European Union countries, and Gulf Cooperation Council states, where the slabs are used in flooring, countertops, and wall cladding.