About Itolec International Private Limited - Stone & Tile Supplier in India

India based Itolec International Private Limited lists 14 active products across engineered quartz stone, porcelain slabs, porcelain tiles, countertops and related stone applications. The catalogue includes engineered quartz slabs sized 63"x126" (160x320 cm) and 32"x118" (80x300 cm) with HS code 6810.99, indicating classification under artificial stone. It also offers a series of porcelain slabs in dimensions from 32"x64" to 64"x126" and porcelain tiles in 24"x48" and 24"x24" formats, as well as quartz countertops, sintered stone and various table tops and sink surfaces. The product set covers the top categories of Slabs, Quartz, Porcelain Tiles, Table Tops, Sinks, Washbasins, Countertops and Stones & Slates as reported in the supplier data.

The listed items are primarily dimension‑specific stone and ceramic panels intended for interior and exterior applications such as kitchen countertops, bathroom vanities, flooring and wall cladding. Engineered quartz products combine 90‑95 % natural quartz crystals with a polyester resin binder, while porcelain slabs are fully vitrified ceramic bodies. The supplier’s portfolio therefore spans both natural‑look engineered stone and high‑density porcelain solutions, providing a range of thicknesses (e.g., 12 mm, 15 mm for large slabs) suitable for commercial and residential projects.

Product Range and Specialties of Itolec International Private Limited

The catalogue presents engineered quartz stone slabs (HS 6810.99) with quartz content around 90‑95 % and polyester resin binder, typical of the industry grade known as “Quartz Surface” that meets ISO 1302 surface‑finish standards and exhibits flexural strength of 60‑70 MPa and water absorption below 0.5 %. Porcelain slabs and tiles are fully vitrified ceramic products commonly classified under HS 6907, with standard thicknesses of 12‑15 mm for slabs and 8‑10 mm for tiles. Industry specifications include a PEI (Porcelain Enamel Institute) rating of 3‑4 for heavy‑traffic flooring, water absorption ≤0.5 %, and breaking strength ≥35 N/mm². Typical dimensions such as 32"x126" (80x320 cm) and 64"x126" (160x320 cm) align with modular installation practices. The range also includes quartz countertops and sintered stone, which are marketed as low‑porosity, stain‑resistant surfaces suitable for kitchen and bathroom applications.

Trade and Export Information - Itolec International Private Limited

India is a leading exporter of engineered quartz and vitrified porcelain products, with major destinations in the Middle East, Europe, Africa and North America. HS 6810.99 covers artificial stone and engineered quartz, while HS 6907 covers ceramic tiles and porcelain slabs; customs authorities in importing countries often request test reports for water absorption, flexural strength and dimensional tolerances. Buyers typically require ISO 9001 quality‑management certification, CE marking for EU markets, and compliance with ASTM C1028 for slip resistance on floor tiles. Export shipments are usually packed in wooden crates or bulk pallets, loaded in 20 ft or 40 ft containers, and traded on FOB or CIF terms depending on buyer preference.

Indian manufacturers of these stone and tile products often adhere to the Bureau of Indian Standards (BIS) guidelines for dimensions and mechanical properties, which facilitates smoother customs clearance. Importers in the Gulf Cooperation Council (GCC) and EU frequently request a Certificate of Origin and a third‑party inspection report (e.g., SGS, Bureau Veritas) to verify compliance with the relevant HS classification and product standards.

Sourcing from Itolec International Private Limited - Buyer Guidance

When sourcing engineered quartz slabs, request a material data sheet that details quartz content, resin type, flexural strength, water absorption and surface finish grade. Verify that the supplier can provide an independent test report (e.g., ISO 1302, ASTM C158) and, if required by the destination market, a CE conformity declaration or ISO 9001 certificate. For porcelain slabs and tiles, ask for PEI rating, water absorption figures, breaking strength results and a BIS or EN‑14411 compliance certificate.

Ask for physical samples of the exact slab dimensions and thickness to assess edge finish and colour consistency before placing a bulk order. Confirm the minimum order quantity (often one 20 ft container, roughly 12‑15 m³ of slabs) and typical lead time, which ranges from 30 to 45 days for standard stock and up to 60 days for custom sizes. Ensure packing details such as wooden crate dimensions, pallet configuration and moisture‑proof wrapping are clearly stated to avoid damage during transit.

What HS codes apply to Itolec’s engineered quartz and porcelain products?

Engineered quartz slabs are classified under HS 6810.99 (artificial stone), while fully vitrified porcelain slabs and tiles fall under HS 6907 (ceramic tiles and porcelain products).

Which certifications should a buyer verify for these stone and tile items?

Buyers should request ISO 9001 for quality management, CE marking for EU markets, and any BIS or EN‑14411 compliance certificates relevant to porcelain tiles. Independent test reports for water absorption and flexural strength are also common requirements.

What are typical dimensions and thicknesses offered by Itolec?

The supplier lists quartz slabs in 63"x126" (160x320 cm) and 32"x118" (80x300 cm) sizes, and porcelain slabs ranging from 32"x64" (80x160 cm) up to 64"x126" (160x320 cm) with thicknesses of 12 mm or 15 mm. Tiles are offered in 24"x48" (60x120 cm) and 24"x24" (60x60 cm) formats.

What is the usual minimum order quantity for a container shipment?

Importers typically order at least one 20 ft container, which can hold approximately 12‑15 m³ of stone slabs or about 20 000 kg of porcelain tiles, depending on packaging and slab thickness.

What lead time can buyers expect for standard stock?

Standard stock of engineered quartz and porcelain slabs is usually ready for shipment within 30‑45 days from order confirmation; custom‑size orders may require up to 60 days.

How are the products packaged for export?

Products are packed in wooden crates or bulk pallets, wrapped with moisture‑proof film, and secured on pallets sized to fit standard 20 ft or 40 ft containers, following common industry practices for stone and tile shipments.

What documentation is needed for customs clearance in the EU?

Customs in the EU generally require a commercial invoice, packing list, Certificate of Origin, CE conformity declaration (if applicable), and any test reports referenced in the product specifications.

Can buyers request samples before placing a full order?

Yes, the supplier can provide sample slabs or tiles matching the specified dimensions and finish; sample requests should specify the exact size, thickness and surface treatment required for evaluation.