About Hory Korea Co., Ltd. - Scaffolding Supplier in South Korea (Republic Of Korea)

South Korea (Republic Of Korea) hosts Hory Korea Co., Ltd., which lists 15 active products across categories such as scaffolding, steel structures, steel pipes, frames, stainless‑steel pipe fittings, clamps, plastic items and canned vegetables. The catalogue records items like Pipe Support (pipe Prop) with HS code 7307.99 made from stainless steel 304/316, System Support Ring‑lock Type (no HS code disclosed), Pipe Couplers (fixed/swivel) also under HS 7307.99 using hot‑formed structural steel SPFH540, Beam Clamp under HS 8205.70 of ductile iron or carbon steel with zinc galvanization, System Scaffold, Steel Formwork, Steel Pipe under HS 7306.30 of hot‑dip galvanized carbon steel, Plastic Formwork, Table Formwork, Wall Anchor for Scaffolding, Steel Plank, Hory Beam, Base Jack for Scaffolding, U‑Head Jack and Wall Anchor. Each product is classified under HS chapter 73 (metal products) or chapter 82 (hand tools).

The listed pipe supports and couplers serve industrial piping networks, while the ring‑lock system provides modular support for temporary structures. Beam clamps and the various scaffold components are intended for construction load‑bearing applications, and the steel pipe range typically covers diameters from DN 15 to DN 600. Plastic formwork and table formwork are used in concrete casting, whereas the wall anchors, steel planks and jacks support scaffold stability. All items are described with explicit material specifications, enabling buyers to match them against standard engineering requirements.

Product Range and Specialties of Hory Korea Co., Ltd.

The catalogue comprises 15 distinct items, each tied to a material class: stainless‑steel 304/316 for pipe supports, hot‑formed SPFH540 structural steel for couplers, ductile iron or carbon steel with zinc galvanization for beam clamps, and hot‑dip galvanized carbon steel for standard steel pipe. In the scaffolding segment, products such as System Scaffold, Steel Formwork, Plastic Formwork, Table Formwork, Wall Anchors, Base and U‑Head Jacks, and Hory Beam address both permanent and temporary construction needs. Industry practice grades stainless‑steel 304 to ISO 683‑2 and 316 to ASTM A240 for corrosion resistance, while SPFH540 steel typically offers a yield strength around 540 MPa. Galvanized steel components are usually coated to a thickness of 50‑100 µm to meet EN 10346, and ductile iron fittings conform to ISO 1083. Typical load capacities for pipe supports and beam clamps range from 10 kN to 200 kN, and scaffold modules are designed to satisfy EN 12811 safety limits.

Scaffolding products from South Korea are frequently manufactured to EN 12811 (European standard) and ASTM A123 (galvanizing) specifications. Steel pipe and fittings often adhere to ASTM A53 or ISO 3183 dimensional tolerances, and customers commonly request mill test reports confirming chemical composition and mechanical properties. The presence of both stainless‑steel and galvanized carbon steel options allows buyers to select corrosion‑resistant or cost‑effective solutions depending on the intended environment.

Trade and Export Information - Hory Korea Co., Ltd.

South Korean exporters of steel construction components typically serve markets in Southeast Asia, the Middle East, Africa and North America, with major importers including Vietnam, the United Arab Emirates, Saudi Arabia, Egypt and the United States. HS code 7306.30 (hot‑dip galvanized steel pipe) and 7307.99 (other tube & pipe fittings) are routinely inspected under Korean customs and often require a Certificate of Origin and a commercial invoice for customs clearance. Buyers usually request ISO 9001 quality‑management certification, CE marking for EU compliance, and test certificates for tensile strength, coating thickness and load capacity. Shipping is commonly arranged in 20‑ft or 40‑ft containers on FOB or CIF terms, with products palletised on Euro pallets and secured with wooden dunnage or steel straps.

Export logistics from South Korea follow standard Incoterms; steel items are loaded in containers with moisture‑resistant wrapping to prevent corrosion during sea transit. Domestic export regulations may require an export license for items classified under strategic trade controls, but ordinary construction steel, scaffolding components and plastic formwork are generally cleared under routine procedures. Importing countries often conduct pre‑shipment inspections under the HS code regime and may request additional documentation such as a compliance statement with EN 1090 for steel structures.

Sourcing from Hory Korea Co., Ltd. - Buyer Guidance

When sourcing from Hory Korea Co., Ltd., buyers should request a Mill Test Report for each steel grade, a coating thickness report for galvanized items, and a load‑test certificate for pipe supports, beam clamps and scaffold modules. Verifying the HS code classification on the commercial invoice helps avoid customs re‑classification; the listed codes are 7307.99 for pipe supports and couplers, 8205.70 for beam clamps and 7306.30 for steel pipe. Samples of critical components such as the pipe support or beam clamp are advisable before committing to larger volumes, and the supplier can provide pre‑production samples under mutually agreed Incoterms.

Typical minimum order quantities for standard steel components start at 500 pieces, with a production lead time of 30‑45 days after receipt of a confirmed purchase order and the required test documentation. Packaging is usually in wooden crates or steel drums, double‑wrapped and placed on Euro pallets to facilitate container loading. Buyers should confirm that the supplier can provide the customary certifications (ISO 9001, CE) and that the products meet EN 12811 (scaffolding) or EN 1090 (steel structures) specifications before finalising the order.

What product categories are listed in Hory Korea Co., Ltd.'s catalogue?

The catalogue contains 15 items covering pipe supports, system support ring‑lock type, pipe couplers, beam clamps, system scaffold, steel formwork, steel pipe, plastic formwork, table formwork, wall anchors for scaffolding, steel planks, Hory beam, base jack for scaffolding, U‑head jack and wall anchor.

Which HS codes apply to the steel pipe and pipe fitting products?

Steel pipe is classified under HS 7306.30 (hot‑dip galvanized carbon steel pipe) and both pipe support and pipe couplers fall under HS 7307.99 (other tube & pipe fittings of iron or steel).

What material standards correspond to the stainless‑steel pipe supports?

The supports are manufactured from stainless‑steel grades 304 or 316, which meet ASTM A240 and ISO 683‑2 specifications for austenitic corrosion‑resistant steel.

What certifications do international buyers usually require for scaffolding and steel structure components from South Korea?

Buyers commonly ask for ISO 9001 quality‑management certification, CE marking for EU market conformity, and compliance with EN 12811 for scaffolding or EN 1090 for steel structures. Test reports for load capacity and coating thickness are also standard requests.

How are the listed items typically packaged and shipped?

Products are usually packed in wooden crates or steel drums, secured on Euro pallets, and loaded into 20‑ft or 40‑ft containers. FOB or CIF terms are the most frequently used Incoterms for South Korean steel exporters.

What minimum order quantities and lead times can a buyer expect?

Standard steel components such as pipe supports or clamps often have an MOQ of around 500 pieces. After order confirmation and receipt of required test documents, lead times are generally 30‑45 days.

How can a buyer request a sample of a specific product?

A buyer should submit a written inquiry naming the product, material grade and intended application. The supplier will arrange shipment of a pre‑production sample under an agreed Incoterm, typically on a DAP basis.

Are there any export restrictions for the steel products listed?

South Korean export controls normally do not restrict ordinary construction steel, but exporters must comply with customs documentation and may need an export license for items subject to strategic trade controls. Standard pipe, fittings and scaffold components are usually cleared under routine export procedures.