About Hexachem Pte. Ltd. - Chemicals & Allied Products Supplier in Singapore

Hexachem Pte. Ltd. is based in Singapore and lists six active chemical products in its online catalogue. The company is classified under the Chemicals & Allied Products category. Its catalogue includes butyl acrylate (HS 2916.12), vinyl acetate monomer (HS 2915.32), 2‑ethylhexanol (HS 2905.16), 2‑ethylhexyl acrylate (HS 2916.12), 2‑hydroxyethyl acrylate (HS 2916.12) and isobornyl acrylate (HS 2916.12). Each entry provides the chemical name, molecular formula and a minimum purity specification where noted. The HS codes place all listed monomers in Chapter 29 of the Harmonized System, which covers organic chemicals.

The listed monomers are standard building blocks for polymerisation, coating binders and adhesive formulations. Butyl acrylate and 2‑ethylhexyl acrylate are commonly supplied in 99 % - 99.5 % purity for coating applications, while vinyl acetate monomer is typically offered at 99.8 % purity for PVC production. 2‑Ethylhexanol is used as a plasticiser precursor and is generally shipped in bulk drums or ISO tanks. 2‑Hydroxyethyl acrylate and isobornyl acrylate are specialty acrylates employed in UV‑curable coatings and inks. Hexachem’s catalogue therefore covers a cross‑section of acrylic and vinyl monomers used in the global chemicals supply chain.

Product Range and Specialties of Hexachem Pte. Ltd.

Hexachem supplies five acrylate monomers - butyl acrylate, 2‑ethylhexyl acrylate, 2‑hydroxyethyl acrylate and isobornyl acrylate - each normally marketed at 99 % - 99.5 % purity and identified by CAS numbers. In the acrylic industry, these monomers meet ISO 9001 quality management expectations and are often required to pass GC‑MS impurity analysis and water content limits below 0.1 %.

Vinyl acetate monomer is typically sold at a minimum of 99.8 % purity and conforms to REACH‑registered specifications for PVC resin production. 2‑Ethylhexanol is generally supplied as an industrial‑grade liquid with a typical water content below 0.05 % and is compatible with ISO 14001 environmental handling procedures. Buyers frequently receive these chemicals in 200 L IBCs, 1 ton drums or 20‑ft containers with polyethylene liners.

Trade and Export Information - Hexachem Pte. Ltd.

Singapore functions as a regional hub for the export of organic intermediates, leveraging its port facilities and free‑trade agreements. Acrylate and vinyl monomers from Singapore are commonly shipped to East Asia (China, South Korea, Japan), Southeast Asia (Indonesia, Malaysia, Thailand) and to Europe for the coatings, adhesives and plastics sectors.

The HS‑2916 and HS‑2915 families are subject to standard customs inspections, and many importers request certificates of analysis, REACH registration numbers and Safety Data Sheets before release. Typical incoterms include FOB Singapore or CIF destination port, with packaging in sealed, UN‑marked drums or bulk IBCs to meet UN 2075 regulations. Buyers should also verify that the shipment complies with local environmental regulations such as the EU’s REACH or the US TSCA.

Sourcing from Hexachem Pte. Ltd. - Buyer Guidance

When sourcing from Hexachem, purchasers should request a current Certificate of Analysis for each monomer, confirming purity, water content and impurity limits. A full Safety Data Sheet, REACH registration proof (if applicable) and a recent ISO 9001 audit report provide additional assurance of compliance.

Samples are typically offered in 250 mL vials or 1 L bottles, allowing buyers to run GC‑MS or HPLC verification before confirming bulk orders. Verify that the packaging material matches the intended transport mode - drums for bulk, IBCs for containerised shipments - and confirm lead times, which for Singapore‑based exporters often range from 2 to 4 weeks after order confirmation.

What types of chemicals does Hexachem list in its catalogue?

Hexachem lists six monomers: butyl acrylate, vinyl acetate monomer, 2‑ethylhexanol, 2‑ethylhexyl acrylate, 2‑hydroxyethyl acrylate and isobornyl acrylate. Each product is identified with its HS code and basic purity specification.

Which HS codes are associated with Hexachem’s products?

The acrylate monomers and isobornyl acrylate use HS 2916.12, vinyl acetate monomer uses HS 2915.32, and 2‑ethylhexanol uses HS 2905.16. These codes belong to Chapter 29 for organic chemicals.

What purity levels are indicated for the listed monomers?

Vinyl acetate monomer is specified at a minimum of 99.8 % purity, and isobornyl acrylate is listed with a minimum of 95 % purity. The other monomers are described as industrial grade, which in the market typically corresponds to around 99 % purity.

What documentation should a buyer request before purchase?

Buyers should ask for a Certificate of Analysis, a Safety Data Sheet, REACH registration evidence where required, and any applicable ISO quality system audit reports. These documents confirm composition, safety handling and regulatory compliance.

What are the common packaging formats for these chemicals?

Standard shipments are in 200 L IBCs, 1‑ton steel drums, or 20‑ft containers equipped with polyethylene liners, all sealed and UN‑marked in accordance with UN 2075 regulations. Smaller sample sizes are usually supplied in 250 mL vials or 1 L bottles.

What incoterms are typically used for shipments from Singapore?

Exporters from Singapore often quote FOB Singapore or CIF to the buyer’s destination port. FOB allows the buyer to arrange freight and insurance, while CIF includes freight and insurance to the named port of destination.