About Hangzhou Yingbang Cable Co.Ltd - Coaxial Cables Supplier in China

Hangzhou Yingbang Cable Co.Ltd is located in Hangzhou, China and currently lists seven active products. The catalogue focuses on coaxial cable variants such as RG6/U, RG11/U, RG8/U, RG59, RG58, as well as generic entries labelled Cable TV and Coaxial cable. Each product is identified by its industry‑standard designation, indicating typical 75 Ω or 50 Ω impedance families used in video and data transmission. The supplier’s product set covers both indoor and outdoor applications, reflecting the breadth of common coaxial formats. The listing does not provide additional technical parameters beyond the product names.

The seven items fall under the broader category of coaxial transmission lines, which are classified in international trade under the electrical machinery chapter. While the catalogue does not specify dimensions, typical RG‑6 cables have a 75 Ω impedance, an outer diameter of about 6 mm, and a copper‑clad steel conductor. RG‑59 and RG‑58 are also 75 Ω and 50 Ω respectively, with outer diameters around 5 mm and 4 mm. RG‑11 and RG‑8 are larger‑diameter, higher‑capacity cables often used for long‑run installations. Buyers can expect these products to be supplied in reels or spools suitable for bulk handling.

Product Range and Specialties of Hangzhou Yingbang Cable Co.Ltd

The current catalogue lists the following product types: RG6/U, Coaxial cable, Cable TV, RG11/U, RG8/U, RG59, and RG58. These designations correspond to standard coaxial cable families used for television, satellite, and data signals. In the industry, RG‑6 typically meets IEC 61175 specifications with a copper‑clad steel conductor, a polyethylene dielectric, and a PVC outer jacket, delivering an attenuation of around 5 dB per 100 m at 1 GHz. RG‑59 and RG‑58 share similar construction but with smaller conductor diameters, resulting in higher attenuation rates of roughly 6 - 7 dB per 100 m at 1 GHz. RG‑11 and RG‑8 are larger‑diameter cables, often built to IEC 61175‑2 standards, supporting lower loss over longer distances, with typical outer diameters of 10 - 12 mm.

Cable TV and generic Coaxial cable entries usually indicate bulk‑supply options that can be cut to length or supplied as pre‑terminated assemblies. Buyers commonly select variants with fire‑retardant PVC (FR‑PVC) for building‑code compliance, or low‑smoke zero‑halogen (LSZH) jackets for confined installations. Standard quality grades include IEC‑grade copper conductors (≥99.9 % purity) and dielectric loss tangents below 0.0005.

Trade and Export Information - Hangzhou Yingbang Cable Co.Ltd

Coaxial cables manufactured in China are exported worldwide, with major importers located in North America, Europe, and Southeast Asia. The products fall under HS Chapter 85 (electrical machinery) and are typically shipped in 20‑ft or 40‑ft containers on wooden pallets or in bulk drums. Buyers often request compliance with RoHS and CE marking, and many importers require ISO 9001 certification from the supplier’s quality management system.

Logistics for these cable reels usually involve temperature‑controlled storage to preserve material integrity, and freight forwarders commonly use CIF or FOB Incoterms. Customs authorities in destination markets frequently inspect for correct HS classification, accurate net weight, and conformity to safety standards such as UL 1699 for coaxial cables used in the United States. Export documentation normally includes a commercial invoice, packing list, certificate of origin, and test reports for impedance and attenuation.

Sourcing from Hangzhou Yingbang Cable Co.Ltd - Buyer Guidance

When sourcing coaxial cables from Hangzhou Yingbang Cable Co.Ltd, buyers should request product data sheets that specify impedance, conductor material, dielectric type, outer jacket composition, and attenuation curves across the relevant frequency range. Independent test reports covering VSWR, shielding effectiveness, and fire‑performance (e.g., IEC 60332) provide additional verification before placing a bulk order.

Buyers are advised to confirm that the supplier can supply RoHS compliance certificates and, if required by the destination market, CE or UL test reports. Sampling a short length of each cable type helps verify physical dimensions, connector compatibility, and mechanical flexibility. Clarifying the packaging format - reel diameter, length per reel, and labeling - ensures smooth handling through customs and warehouse operations.

What coaxial cable types does Hangzhou Yingbang Cable Co.Ltd list in its catalogue?

The catalogue lists seven items: RG6/U, Coaxial cable, Cable TV, RG11/U, RG8/U, RG59, and RG58, all of which are standard coaxial transmission lines used for video and data applications.

What are the typical impedance values for the RG‑6 and RG‑59 cables offered?

RG‑6 cables are commonly manufactured with a 75 Ω characteristic impedance, while RG‑59 cables are also 75 Ω but have a smaller conductor, leading to higher attenuation at high frequencies.

Which certifications are typically required for importing Chinese coaxial cables?

Importers usually require RoHS compliance, CE marking for European markets, and UL test reports for the United States; ISO 9001 quality management certification is also frequently requested from the supplier.

How are the cables usually packaged for export?

Coaxial cables are typically wound onto reels or spools, placed on wooden pallets, and loaded into 20‑ft or 40‑ft containers; the packaging includes a packing list and labels indicating product type, length per reel, and net weight.

What documentation should a buyer request before placing an order?

Buyers should ask for a product data sheet, test reports for impedance and attenuation, RoHS compliance certificate, and, where applicable, CE or UL certification documents.

What are common lead times and minimum order quantities for these cable types?

Lead times generally range from 2 to 4 weeks after order confirmation, and minimum order quantities are often expressed in terms of reel count, with a typical MOQ of one full‑size reel per cable type.

Are custom lengths or termination options available?

Suppliers in China frequently offer cut‑to‑length services and pre‑terminated assemblies upon request, though the buyer should confirm the specific termination standards and associated tooling.

What freight terms are commonly used for shipping these cables?

Export shipments are usually quoted on FOB Hangzhou or CIF destination port, with the buyer arranging sea freight and insurance as needed.