About Foshan Shunde Xinsheng Hardware Co., Ltd. - Building Fittings and Iron Nails Supplier in China

Foshan Shunde Xinsheng Hardware Co., Ltd. is a China-based hardware exporter registered in Foshan, in the Guangdong province of southern China, a manufacturing belt known for hardware, building fittings and fasteners. The supplier lists 5 active products grouped under two top categories: Building Fittings and Iron Nails. The catalogue is concentrated on fastening products, with iron nails, coiled nails, shoot nails and umbrella head nails (including a coloured variant) covering the main types of nails used in construction, carpentry and packaging. The product set points to a supplier focused on the construction fastener segment rather than a broad hardware range, with all items falling within the iron and steel nails family of goods that sit under HS chapter 73. The supplier operates from Shunde district of Foshan, which sits in the Pearl River Delta near Guangzhou and is one of China's largest concentrations of building materials and hardware factories. The active product count of 5 indicates a focused rather than diversified catalogue, with the listed items covering the principal nail geometries buyers in the construction and woodworking trades typically source in bulk. Because the supplier's tier is classified as imported on the platform and its trust tier as harbor, buyers should treat the listed catalogue as the starting point for verification, with details on grade, finish, dimensions and packaging to be confirmed directly with the supplier.

Product Range and Specialties of Foshan Shunde Xinsheng Hardware Co., Ltd.

The catalogue of Foshan Shunde Xinsheng Hardware Co., Ltd. lists 5 products: umbrella head nail, coloured umbrella head nail, iron nails, common coiled nails and shoot nails. Umbrella head nails and the coloured variant are roofing nails with a large flat head and a short shank, commonly used for fixing roofing felt, insulation boards and thin sheet materials; the coloured versions are typically polyester or epoxy coated for corrosion resistance and visual matching with roofing sheets. Iron nails in this category are general-purpose bright or polished common nails, used in framing, carpentry and packaging. Common coiled nails are collated nails supplied in wire-wound coils for high-speed pneumatic nailers used in pallet manufacturing, crating and framing. Shoot nails, also called concrete nails or drive pins, are hardened nails designed to be driven into concrete, brick or masonry, often used with powder-actuated tools. Buyers sourcing nails from China typically evaluate products against specifications such as shank diameter (commonly 1.6 mm to 6.0 mm), length (typically 20 mm to 150 mm), head diameter, material grade (Q195, Q235 low-carbon steel wire is standard for common nails; 45# or 60# high-carbon steel is used for hardened concrete nails), tensile strength (often 300 to 700 MPa depending on grade), and surface finish (bright, electro-galvanized, hot-dip galvanized, or PVC/polyester coated). Coiled nails are usually specified by collation angle (commonly 15°, 16° or 21°), wire diameter and the number of nails per coil (typically 200 to 400 pieces). Concrete nails are graded by hardness (HRC 40 to 55) and shank type (smooth, fluted or twisted). Packaging norms in this segment include 1 kg, 2.5 kg, 5 kg, 20 kg and 25 kg cartons, with 20-foot and 40-foot container loads of approximately 18 to 25 tonnes depending on nail type and packaging density.

Trade and Export Information - Foshan Shunde Xinsheng Hardware Co., Ltd.

Iron and steel nails from China are typically exported under HS code 7317 (Nails, tacks, drawing pins, corrugated nails, staples and similar articles of iron or steel), with subheadings such as 7317.00 for cold-formed nails and threaded articles. The main importing regions for Chinese nails are Southeast Asia, the Middle East, Africa, South America, Eastern Europe and North America, where they are used in residential construction, pallet and crate manufacturing, roofing, and DIY retail. Foshan and the broader Guangdong hardware cluster serve as a major export base for fasteners, with shipments typically moving out of Shenzhen, Guangzhou or Foshan ports to global buyers. For these product categories, buyers and inspection bodies commonly require certifications and documents such as ISO 9001 quality management certification, mill test certificates (MTC) confirming steel grade and chemical composition, salt spray test reports for galvanized or coated nails (often 24 to 500 hours depending on the coating class), and REACH or RoHS compliance for the European market. Coiled nails for pneumatic tools may also require compatibility confirmation with specific tool brands and conformity to ANSI B18.6.1 or equivalent standards for nail dimensions. Standard trade terms for nail exports from China are typically FOB, CFR or CIF with 30% T/T deposit and balance against copy of B/L, with lead times of 15 to 30 days for stock items and 30 to 45 days for made-to-order specifications. Packaging for export usually involves inner plastic woven bags or cartons inside outer woven bags, palletized and shrink-wrapped for container loading.

Sourcing from Foshan Shunde Xinsheng Hardware Co., Ltd. - Buyer Guidance

Buyers sourcing from Foshan Shunde Xinsheng Hardware Co., Ltd. should request the mill test certificate for the steel grade used (commonly Q195 or Q235 for common and roofing nails, 45 steel for hardened shoot nails), along with a salt spray test report if the nails are galvanized or coated, and the shank diameter, length, head diameter and tolerance data for the specific item. For coiled nails, the collation angle, nails-per-coil count, wire diameter, and compatibility with the buyer's pneumatic tool brand and model should be confirmed in writing before order placement. Samples of each product should be requested to verify head shape, shank finish, hardness (HRC value for concrete nails) and coating uniformity before confirming a bulk order. Because the supplier's trust tier is classified as harbor on the platform, additional verification steps are advisable: a third-party pre-shipment inspection (such as SGS, Bureau Veritas or TUV) covering quantity, dimensions, hardness, coating thickness, salt spray performance and packaging is recommended for first orders. Buyers should also confirm the Incoterms, port of loading (typically Shenzhen or Guangzhou for Foshan shipments), lead time, payment terms and whether the supplier can provide OEM or custom packaging. For coated products such as coloured umbrella head nails, confirmation of the coating type (PVC, polyester or epoxy), coating thickness in microns and UV resistance is standard practice. Documentation typically required at destination includes the commercial invoice, packing list, bill of lading, certificate of origin (Form E for ASEAN, Form F for China-Chile, or general CO depending on the destination) and any destination-specific conformity documents.

What products does Foshan Shunde Xinsheng Hardware Co., Ltd. supply?

The supplier lists 5 active products: umbrella head nails, coloured umbrella head nails, iron nails, common coiled nails and shoot nails, all falling under the Building Fittings and Iron Nails categories. These cover the main nail types used in construction, roofing, carpentry, pallet manufacturing and masonry work.

Which HS code applies to the nails supplied?

Iron and steel nails are typically exported under HS code 7317, which covers nails, tacks, staples and similar articles of iron or steel. Buyers should confirm the exact 6-digit subheading with the supplier based on the specific product and finish.

What steel grades are commonly used for these nails?

Common and roofing nails are typically drawn from Q195 or Q235 low-carbon steel wire, while hardened shoot nails and concrete nails are usually made from 45# or 60# high-carbon steel. The exact grade and mill test certificate should be requested and verified per shipment.

Which documents and certifications should I request before ordering?

Buyers typically request a mill test certificate (MTC) for steel grade and chemical composition, a salt spray test report for galvanized or coated nails, ISO 9001 certification if available, and a sample for dimensional and hardness verification. For European destinations, REACH and RoHS compliance documentation may also be required.

What packaging and container loadings are standard for these products?

Nails are commonly packed in 1 kg, 2.5 kg, 5 kg, 20 kg or 25 kg inner cartons or plastic bags inside woven outer bags, palletized and shrink-wrapped. A 20-foot container typically holds around 18 to 25 tonnes depending on nail type, packaging and pallet configuration.

What is the typical lead time for export orders from this supplier?

Lead times for stock specifications are typically 15 to 30 days after order confirmation, while made-to-order specifications (custom lengths, coatings or collation angles) usually require 30 to 45 days. Production and shipment schedules should be reconfirmed directly with the supplier at the time of enquiry.

Which regions typically import nails from Foshan, China?

Nail exports from the Foshan and Guangdong cluster are typically shipped to Southeast Asia, the Middle East, Africa, South America, Eastern Europe and North America. These regions use Chinese nails in residential construction, roofing, pallet and crate manufacturing, and general carpentry.

Can the supplier provide custom specifications or OEM packaging?

Custom specifications such as specific shank diameters, lengths, head types, coating colours and collation angles are commonly available from Chinese nail manufacturers. Buyers should submit detailed drawings or samples and confirm minimum order quantities, tooling costs and lead times for any custom requirement.