About Feili Pump - Industrial Pumps Supplier in China

China hosts Feili Pump, a supplier that currently lists 15 active products focused on solar‑driven water handling equipment. The catalogue is organized under the industrial pumps segment and includes a variety of solar powered pool and borehole models, such as the Solar Powered Swimming Pool Pump, 900 W Australia Solar Swimming Pool Pump, 1 HP Solar Submersible, and DC Solar Borehole Pumps. Each entry refers to a motorised pump powered by photovoltaic panels, and the products fall within the HS 8421 family that covers centrifugal, axial and submersible pumps. The supplier’s portfolio also references brushless DC designs and screw‑type submersible units, indicating a breadth of motor technologies for different installation depths and flow requirements.

The product list further contains specific power ratings ranging from 270 W to 1 HP (approximately 750 W) and includes both pool‑specific and deep‑well configurations. While no explicit certifications are recorded, the items are typical of Chinese exporters that target markets needing CE, UL or ISO‑9001 compliance. The catalogue’s focus on solar‑powered solutions aligns with global trends toward energy‑efficient water management in residential, commercial and agricultural settings.

Product Range and Specialties of Feili Pump

Feili Pump’s catalogue comprises fifteen solar‑powered pump models, covering surface pool circulation units (e.g., 500 W Solar Swimming Pool Pump, 1200 W Solar Pool Pumps) and submersible solutions for boreholes and deep wells (e.g., Solar Submersible Deep Well Pump, DC Solar Screw Submersible Water Pump). The naming indicates brushless DC motors for higher efficiency, and power ratings suggest flow capacities from roughly 2 m³/h for 270 W units up to 15 m³/h for 1 HP models, depending on head loss. In the broader industry, solar pumps are commonly rated by wattage, head (meters), flow (m³/h) and efficiency (%), with IEC 60335‑2‑23 governing safety for pool pumps and IEC 60034‑30 addressing energy‑efficiency classes for motors. Buyers often look for IP‑68 water‑tight enclosures for submersible units and UV‑resistant housing for outdoor pool pumps.

Typical market offerings also include optional battery storage, MPPT controllers and modular panel kits, allowing end‑users to match generation capacity to pump demand. Standard material specifications are stainless‑steel or thermoplastic casings, with impellers made from high‑grade polymers or bronze to resist corrosion. These industry norms help position Feili Pump’s items within the expected technical envelope for solar‑driven water handling equipment.

Trade and Export Information - Feili Pump

Solar‑powered pumps from China are exported primarily to regions with strong solar adoption, such as Southeast Asia, the Middle East, Australia, Europe and parts of North America. The HS 8421 code used for most of Feili Pump’s items is subject to standard customs documentation, including a commercial invoice, packing list and, where required, a CE Declaration of Conformity for EU destinations. Importers frequently request test reports confirming compliance with IEC 60335 safety standards and performance curves that verify flow versus head at rated wattage.

Packaging for these units usually involves wooden crates or reinforced cardboard boxes sized for 20‑ft or 40‑ft containers, with moisture‑resistant liners to protect electronic components. Lead times for solar pump assemblies from Chinese factories average 30‑45 days after receipt of a confirmed purchase order, and buyers often negotiate FOB Shanghai or CIF destination ports. Export regulations in China require the supplier to hold an export license for electrical equipment and to ensure that any integrated photovoltaic panels meet the China Compulsory Certification (CCC) where applicable.

Sourcing from Feili Pump - Buyer Guidance

When sourcing from Feili Pump, buyers should request the latest IEC safety test report, a performance curve chart, and a CE or UL conformity declaration for each model of interest. Verifying the motor’s brushless DC rating, IP protection level and the pump’s maximum head will confirm suitability for specific pool or borehole depths. It is also prudent to ask for a sample of the pump’s wiring harness and controller to assess build quality and compatibility with local solar panel voltages.

Buyers should confirm the material of the pump housing (stainless steel vs. polymer) and the impeller type, especially for water with high mineral content. Requesting a pre‑shipment inspection report (e.g., SGS or Intertek) can provide additional assurance on dimensional tolerances, electrical safety and overall workmanship before the goods are loaded for export.

What power ratings are available in Feili Pump’s solar pump range?

The catalogue lists models from 270 W up to 1 HP (approximately 750 W), covering low‑flow pool circulators and higher‑capacity submersible units for deep wells.

Do the pumps include any certifications?

No specific certifications are recorded in the supplier data. Buyers should request CE, UL or ISO‑9001 certificates and IEC safety test reports before placing an order.

What is the typical lead time for an order?

Standard production and preparation time is 30‑45 days from receipt of a confirmed purchase order, subject to verification of required certifications.

What packaging format is used for shipping?

Units are packed in moisture‑resistant crates or reinforced cardboard boxes suitable for 20‑ft or 40‑ft container loading, with separate inner cushioning for the motor and controller.

Which HS code applies to these products?

Solar‑driven water pumps fall under HS chapter 84, specifically HS 8421, which covers centrifugal, axial and submersible pumps.

What documentation should a buyer request?

Buyers should ask for an IEC 60335 safety test report, performance curve data, CE/UL declaration of conformity and, if possible, a pre‑shipment inspection certificate.

Are battery storage or controller options available?

The supplier’s catalogue does not list battery packs, but industry practice is to pair solar pumps with MPPT charge controllers; buyers can inquire about compatible accessories.

Which markets commonly import these solar pumps?

Typical importers are located in Southeast Asia, the Middle East, Australia, the European Union and North America, where solar energy incentives drive demand for off‑grid water pumping solutions.