About Cixi Wangtong Electronic Co., Ltd. - Electric Switches & Isolators Supplier in China

Cixi Wangtong Electronic Co., Ltd. is located in Cixi, China and currently lists seven active products. The company’s catalogue falls under the primary category Electric Switches & Isolators and includes a variety of electromechanical switching components. Product titles in the catalogue are DIP switch, Rotary DIP Switch, Slide type switch, Right‑angle type switch, Piano type switch, Slide sip switch, and a Cat5e patch panel. Each item is presented under the generic HS‑code families for switches (8536) and networking hardware (8544), which are the standard tariff headings for these goods. The supplier’s listing does not provide additional specifications such as voltage or current ratings, leaving those details to the buyer’s request.

The seven products cover both discrete switch formats and a networking accessory. The switch range spans through‑hole DIP configurations, rotary selectors, linear slide mechanisms, right‑angle mounted units, and piano‑style toggle switches, reflecting common form factors used in industrial control panels and consumer electronics. The inclusion of a Cat5e patch panel expands the offering into structured cabling solutions for data‑center and telecom installations. While the catalogue does not assign individual HS codes, the overall product set aligns with the electrical‑switch chapter (8536) and the communications‑equipment chapter (8544) of the Harmonized System.

Product Range and Specialties of Cixi Wangtong Electronic Co., Ltd.

The switch portfolio includes DIP switches, rotary DIP selectors, slide‑type, right‑angle, piano‑type, and slide‑sip variants. In the industry these devices are typically rated for 5 A at 250 V AC, feature a contact resistance below 50 mΩ, and comply with IEC 60947‑5‑1 for general-purpose switches. Common quality grades specify an IP20 enclosure for indoor use, a minimum of 10 000 operating cycles, and a contact bounce time under 5 ms. Buyers often request certification to CE, UL 489, or RoHS to confirm safety and environmental compliance.

The Cat5e patch panel listed is a networking hardware component that usually supports 24 RJ45 ports, adheres to Category 5e performance (up to 100 MHz bandwidth and 1 Gbps Ethernet), and is built to IEC 61753‑1 for cabling. Standard specifications include a panel depth of 19 mm for rack mounting, a metal or high‑impact polymer chassis, and a knock‑down design for easy installation. Typical quality checks involve continuity testing, crosstalk measurement (NEXT/CTI), and compliance with ANSI/TIA‑568‑C.2.1. Suppliers commonly provide certification that the panel meets these standards and that the cabling components are RoHS‑compliant.

Trade and Export Information - Cixi Wangtong Electronic Co., Ltd.

China is one of the world’s largest exporters of electromechanical switches and networking hardware, with the majority of shipments classified under HS 8536 (electrical switches) and HS 8544 (connectors and patch panels). Major import regions for these products include North America, Western Europe, and Southeast Asia, where they are used in automotive electronics, industrial automation, consumer appliances, and data‑center infrastructure. Buyers typically require CE marking, UL certification, and RoHS compliance documentation to satisfy safety and environmental regulations in these markets. Export logistics commonly involve containerized freight; a 20‑foot container can hold roughly 2 000 to 3 000 individual switch units, while a patch panel is usually packed in anti‑static foam and shipped in a 40‑foot container for bulk orders.

Customs inspections for HS 8536 and HS 8544 often focus on conformity to IEC standards, proper labeling of voltage and current ratings, and verification of declared certifications. Chinese manufacturers frequently use polyethylene‑foam or corrugated cardboard for protective packaging, and shipments are usually offered on FOB or CIF terms. Importers should be aware of the need for a test report from an accredited laboratory confirming compliance with IEC 60947‑5‑1 for switches and IEC 61753‑1 for cabling equipment.

Sourcing from Cixi Wangtong Electronic Co., Ltd. - Buyer Guidance

When sourcing switches from Cixi Wangtong Electronic, buyers should request the specific electrical rating (voltage, current, power) for each switch type, as well as the IP protection class and mechanical life cycle data. A copy of the IEC 60947‑5‑1 test report, along with CE or UL certificates and a RoHS compliance statement, is standard documentation for verification. For the Cat5e patch panel, request the TIA‑568‑C performance test results, a product data sheet showing port count and rack‑mount dimensions, and confirmation of RoHS compliance.

Typical minimum order quantities for individual switch styles range from 1 000 pieces to 5 000 pieces, with lead times of 15‑30 days after order confirmation and receipt of required certifications. Packaging is usually in anti‑static poly bags placed in bulk cartons, and shipments are commonly arranged on a FOB Shanghai or CIF Shanghai basis. Buyers should verify that the supplier can provide a third‑party inspection report if required by the importing country’s customs authority.

What electrical ratings are available for the DIP and rotary switches?

The catalogue does not list specific ratings, so buyers should request the voltage and current rating, which are typically 5 A / 250 V AC for standard industrial switches.

Do the switches comply with IEC 60947‑5‑1?

Buyers need to obtain a test report confirming IEC 60947‑5‑1 compliance; this is the standard requirement for safety and performance in most markets.

What certifications should be requested for the Cat5e patch panel?

Ask for CE or UL certification, a TIA‑568‑C performance test report, and a RoHS compliance declaration to meet most European and North American import rules.

What is the usual packaging for the slide‑type and piano‑type switches?

These switches are typically packed in anti‑static poly bags, placed in cardboard cartons of 500‑1000 units, and then loaded into a shipping container.

What HS codes apply to the products listed?

Electrical switches fall under HS 8536, while the Cat5e patch panel is classified under HS 8544, which are the standard tariff headings used for customs clearance.

What are common lead times and MOQ for these products?

Lead times are generally 15‑30 days after order confirmation, and minimum order quantities range from 1 000 to 5 000 pieces depending on the switch type.

Which regions typically import Chinese electric switches?

North America, Western Europe, and Southeast Asian countries are the primary import markets for Chinese‑made electromechanical switches.

How should buyers verify RoHS compliance?

Request a RoHS compliance certificate or a laboratory test report that lists the concentration of restricted substances for each product batch.