About Beijing Xingtai Steel Weldmesh & Technology Development Co., Ltd. - Wire Mesh Supplier in China

Based in Beijing, China, Beijing Xingtai Steel Weldmesh & Technology Development Co., Ltd. lists nine active products across the wire mesh, steel bars, wires & cables, and steel wires categories. The catalogue includes reinforced mesh sheets, welded wire mesh for concrete slabs, concrete mesh panels, concrete welded wire, welded wire concrete reinforcement, cold rolled steel bar (HS 7207.19, cold rolled low‑carbon steel with 0.05‑0.25 % C), steel wire rod (HS 7213.99, carbon steel ranging from low to high carbon), custom welded brick coil mesh, and hot rolled steel bar (HS 7207.20, carbon steel with C 0.15‑0.25 %, Mn 0.60‑1.65 %, Si ≤ 0.40 %, S/P ≤ 0.05 %).

All listed items fall under HS Chapter 72 for iron and steel products, with the mesh and reinforcement items typically used in reinforced‑concrete construction, while the steel bars and wire rods serve structural, automotive and manufacturing applications. The product mix reflects standard steel grades employed in the industry, such as low‑carbon grades for mesh and high‑strength grades for hot‑rolled bars, aligning with common specifications like ASTM A1064 for welded wire mesh and ASTM A615 for reinforcement bars.

Product Range and Specialties of Beijing Xingtai Steel Weldmesh & Technology Development Co., Ltd.

The supplier’s catalogue covers welded wire mesh products such as reinforced mesh sheets, concrete mesh panels and custom brick coil mesh, which are commonly manufactured with wire diameters from 8 mm to 14 mm and spacing of 100 mm to 200 mm to meet ASTM A1064 or EN 10237 reinforcement standards. Cold rolled steel bars (HS 7207.19) are typically supplied in grades equivalent to Chinese Q235 or international ASTM A36, while hot rolled bars (HS 7207.20) correspond to higher‑strength grades like HRB400, meeting tensile strengths of 400‑500 MPa. Steel wire rods (HS 7213.99) are offered in low‑, medium‑ and high‑carbon variants, often conforming to ASTM A1064 or ISO 898‑1 for tensile testing.

Industry practice for these categories includes offering surface‑treated options (galvanised or epoxy‑coated) for corrosion resistance, and providing material certifications such as Mill Test Reports (MTR) and compliance with ISO 9001 quality‑management systems. Buyers usually request dimensional tolerances (±0.2 mm for wire diameter), mechanical property test results, and chemical analysis reports to verify grade conformity.

Trade and Export Information - Beijing Xingtai Steel Weldmesh & Technology Development Co., Ltd.

China is a major exporter of steel mesh and reinforcement products, with shipments frequently directed to construction‑intensive regions in Southeast Asia, the Middle East, Africa and Eastern Europe. HS 7207 and HS 7213 families are subject to standard customs procedures, and many importing countries require conformity to ASTM, EN or GB standards and may request a Certificate of Origin and a commercial invoice indicating the HS code. Commonly required certifications include ISO 9001 for quality management, CE marking for EU markets, and compliance with local building codes such as the Indian IS 456 or Saudi SAB 281. Typical packaging involves bundling mesh panels on wooden pallets, shrink‑wrapping steel bars in bundles of 10‑20 tonne, and loading 20‑ft containers at up to 22 tonnes, with FOB or CIF incoterms used in most transactions.

Sourcing from Beijing Xingtai Steel Weldmesh & Technology Development Co., Ltd. - Buyer Guidance

When sourcing from this supplier, buyers should request a Mill Test Report that details chemical composition, tensile strength, yield point and elongation for each steel grade. For mesh products, a compliance statement to ASTM A1064 or EN 10237, together with a sample of the finished panel, helps verify wire spacing and coating quality. Verify the supplier’s ability to provide CE or ISO‑based certificates if the destination market mandates them, and confirm packaging dimensions (e.g., pallets of 1 m × 1.2 m × 1.5 m) to assess container loading efficiency. Minimum order quantities are typically expressed in metric tonnes (often 10 t for bars, 5 t for mesh), with lead times ranging from 30 to 45 days after order confirmation.

What wire mesh products does the supplier offer and what standards apply?

The catalogue includes reinforced mesh sheets, welded wire mesh for concrete slabs, concrete mesh panels and custom brick coil mesh. These products generally meet ASTM A1064 or EN 10237 specifications for wire diameter, spacing and tensile strength.

Which steel bar grades are listed and what are their typical chemical limits?

Cold rolled steel bar (HS 7207.19) is low‑carbon steel with carbon content 0.05‑0.25 %. Hot rolled steel bar (HS 7207.20) contains C 0.15‑0.25 %, Mn 0.60‑1.65 %, Si ≤ 0.40 % and S/P ≤ 0.05 %, matching grades such as Q235 or HRB400.

What material certifications should a buyer request for these products?

Buyers should request a Mill Test Report, ISO 9001 quality‑management certification, and, where required, CE marking or compliance certificates to ASTM/EN standards relevant to the target market.

How are the steel wire rods classified and what carbon ranges are available?

The steel wire rods are classified under HS 7213.99 and are offered in low, medium and high carbon grades, covering carbon contents from below 0.25 % up to above 0.60 %.

What are typical packaging and container loading practices for the mesh and bar products?

Mesh panels are usually palletised and shrink‑wrapped, while steel bars are bundled in 10‑20 tonne loads on wooden pallets. A standard 20‑ft container can accommodate approximately 22 tonnes of bundled steel products.

Which export markets commonly import these Chinese steel mesh and bar products?

Major importers include countries in Southeast Asia, the Middle East, Africa and Eastern Europe, where the products support reinforced‑concrete infrastructure, building construction and manufacturing sectors.

What are common incoterms used for shipping these steel products from China?

Suppliers typically offer FOB (Free on Board) at major Chinese ports such as Tianjin or Shanghai, and CIF (Cost, Insurance, Freight) to the buyer’s destination port.

What lead time and minimum order quantities should a new buyer expect?

Lead times are generally 30‑45 days after order confirmation. Minimum order quantities are usually expressed in metric tonnes, for example 10 t for steel bars and 5 t for welded wire mesh.