About Anwer Rashid Industries - Automobile Tyres, Tubes & Wheels Supplier in Pakistan

Pakistan‑based Anwer Rashid Industries currently lists ten active products in its catalogue. The company’s portfolio covers reclaimed rubber materials, small‑vehicle tyres and tubes, as well as accessory items such as rim flaps. Products are grouped under the categories Automobile Tyres, Tubes & Wheels, Tyre Scrap, Rubber & Related Items, Raw Rubber, Wheelbarrow, and Wheel Rims/Hubs. The catalogue includes both raw rubber grades (Whole Tyre Reclaimed Rubber, Butyl Reclaimed Rubber, Natural Reclaimed Rubber) and finished tyre products for wheelbarrows, bicycles and motorcycles. Each entry aligns with HS code families for rubber and tyre articles, though specific codes are not disclosed in the source data.

Product Range and Specialties of Anwer Rashid Industries

The listed catalogue comprises Whole Tyre Reclaimed Rubber, Butyl Reclaimed Rubber and Natural Reclaimed Rubber, which are typical feedstocks for rubber compounding. In the industry reclaimed rubber is graded by purity, ash content and hardness (e.g., MR‑30, VR‑50) and is often supplied in bulk bags or bulk containers. Wheelbarrow tyres and tubes are usually sized 10‑12 inches in diameter, made from reinforced natural rubber, and shipped in 20 ft or 40 ft containers. Bicycle tyres and tubes commonly follow ISO 5775 sizing (e.g., 20‑28 mm width, 26‑29 inch diameter) and are packaged in cardboard boxes or bulk bundles. Motorcycle tyres and tubes are sized according to ISO 6291 and are typically reinforced with steel belting for load‑bearing applications. The product mix reflects standard rubber industry specifications such as Shore A hardness, tensile strength above 15 MPa for reclaimed rubber, and tread depth requirements for tyre products.

Trade and Export Information - Anwer Rashid Industries

Pakistan exports reclaimed rubber and tyre products primarily to the Middle East, East Africa and parts of Europe, where automotive aftermarket demand drives imports. HS chapter 40 (Rubber and articles thereof) covers the reclaimed rubber grades (HS 4001) and tyre articles (HS 4011, HS 4017). Buyers usually require compliance with ISO 9001 quality management, ISO 14001 environmental management, and REACH registration for EU destinations. Standard Incoterms for Pakistani rubber shipments include FOB Karachi or CIF Dubai, with bulk shipments packed in wooden pallets, woven polypropylene bags (up to 25 kg) or bulk containers for large reclaimed rubber lots. Export documentation typically includes a commercial invoice, packing list, certificate of origin, and, when required, a REACH compliance statement.

Sourcing from Anwer Rashid Industries - Buyer Guidance

When sourcing reclaimed rubber from this supplier, request a material test report that includes ash content, moisture level, tensile strength, elongation at break and Shore A hardness. For tyre products, ask for size specifications, load index, speed rating, tread pattern diagrams and a test report confirming compliance with ISO 5775 (bicycle) or ISO 6291 (motorcycle). Verify that the supplier can provide a Certificate of Origin and, if the destination market requires, a REACH or EU‑type conformity declaration. Sampling is common practice; a small bulk bag of reclaimed rubber or a single tyre unit should be inspected for surface defects, uniformity and correct dimensions before finalizing the order.

What reclaimed rubber grades are offered by Anwer Rashid Industries?

The catalogue lists Whole Tyre Reclaimed Rubber, Butyl Reclaimed Rubber and Natural Reclaimed Rubber. In the industry these are typically classified by purity and hardness, such as MR‑30 or VR‑50, and buyers should request the specific grade data sheet.

Are the reclaimed rubber products supplied in bulk or packaged units?

Reclaimed rubber is usually shipped in bulk bags (20‑25 kg) or bulk containers for larger volumes. The supplier can arrange either option depending on order size and logistics preferences.

Which sizes are available for the bicycle tyres and tubes?

Bicycle tyres and tubes follow ISO 5775 sizing, commonly ranging from 20 mm to 28 mm width and 26 inch to 29 inch diameter. Exact dimensions are listed in the product sheet and can be confirmed on request.

What is the typical minimum order quantity for wheelbarrow tyres?

Wheelbarrow tyres are often ordered in multiples of 100 units per container load, but the supplier can adjust the MOQ after a sample request and packaging discussion.

Which certifications should a buyer request for these rubber products?

Buyers usually ask for ISO 9001 and ISO 14001 compliance certificates, a material test report, and, for EU shipments, a REACH registration statement.

What HS codes apply to the products listed by Anwer Rashid Industries?

Reclaimed rubber falls under HS 4001, while tyre articles such as bicycle, motorcycle and wheelbarrow tyres are classified under HS 4011 or HS 4017, depending on the exact product form.

How are the tyre products typically packaged for export?

Tyre products are commonly packed in cardboard boxes for small orders or on wooden pallets with shrink‑wrap for bulk shipments. Bulk reclaimed rubber is placed in woven polypropylene bags or bulk containers.

What lead time is typical for motorcycle tyre orders?

Lead times for motorcycle tyres generally range from 30 to 45 days after order confirmation, depending on production scheduling and required customs documentation.