About Al Mina Marble & Granite Trading LLC - Marble & Granite Supplier in United Arab Emirates

United Arab Emirates‑based Al Mina Marble & Granite Trading LLC lists nine active stone products. The catalogue includes one engineered quartz product, Statuario Quartz (HS code 6810.99, composed of 90‑95 % natural quartz aggregates bound with polyester resin), and eight natural or artificial stone items: Bianco Diamante Granite, Grigo Londra Marble, Bottochino Artificial Marble, Calacatta Roma Marble, Repen Marble, Grigio Diamante Marble, Rosso Levanto Artificial Marble and Bianco Thasos Artificial Marble. All products fall under the broader HS‑6810 family that covers marble, granite, artificial stone and related engineered stone slabs.

The listed stones are supplied as slabs suitable for architectural and interior applications. Typical slab dimensions range from 2 m × 1 m to 3 m × 1.5 m, with thicknesses of 20 mm, 25 mm or 30 mm. Finishes include polished, honed and brushed surfaces, and the artificial marble variants are fabricated from resin‑bound aggregates. The engineered quartz slab complies with the HS sub‑heading 6810.99, while the natural granite and marble items align with HS sub‑headings 6810.90‑99 that differentiate natural stone from artificial stone products.

Product Range and Specialties of Al Mina Marble & Granite Trading LLC

The catalogue covers three stone categories: natural granite (Bianco Diamante), natural marble (Grigo Londra, Calacatta Roma, Repen, Grigio Diamante, Rosso Levanto, Bianco Thasos) and engineered quartz (Statuario Quartz). In the stone trade, natural marble and granite are typically classified in grade A (high visual quality, low veining) or grade B (moderate veining) based on visual inspection and surface uniformity. Engineered quartz slabs are graded by colour consistency, resin content and mechanical strength, with industry standards such as ASTM C615 specifying a minimum flexural strength of 100 MPa and water absorption below 0.1 %. Artificial marble products are usually resin‑based composites meeting EN 1469 for durability and colour fastness.

Buyers of marble, granite or quartz slabs often request data on compressive strength (≥ 200 MPa for granite, ≥ 150 MPa for marble), surface hardness (Mohs 6‑7), and dimensional tolerances (± 2 mm on thickness). Standard slab sizes of up to 3 m × 1.5 m enable coverage of large floor or countertop areas with minimal joints. Typical finishes - polished (gloss 70‑80 %), honed (gloss < 20 %) and brushed - are specified in project drawings and affect slip resistance and aesthetic appearance.

Trade and Export Information - Al Mina Marble & Granite Trading LLC

The United Arab Emirates serves as a regional re‑export hub for natural stone, with shipments from UAE ports reaching Europe (Italy, Spain, Germany), the Gulf Cooperation Council, South Asia and North America. HS‑6810 codes are monitored under the World Customs Organization’s Harmonized System; customs authorities commonly require a commercial invoice, packing list and a certificate of origin for stone slabs. Importers usually request ISO 9001 quality‑management certification, as well as product‑specific standards such as ASTM C615 for engineered quartz and EN 1469 for artificial stone. Packaging follows industry norms: slabs are wrapped in protective film, stacked on wooden pallets, and secured with corner protectors; a 40‑ft container can accommodate 12‑14 standard slabs, depending on thickness.

Typical Incoterms for UAE stone exporters are FOB Dubai or CIF Jebel Ali, with freight handled by roll‑on/roll‑off vessels for oversized loads. Export documentation often includes a pre‑shipment inspection report (e.g., SGS or Bureau Veritas) confirming compliance with dimensional and strength specifications. UAE exporters benefit from free‑zone facilities that streamline customs clearance and allow consolidated shipments to multiple destination ports.

Sourcing from Al Mina Marble & Granite Trading LLC - Buyer Guidance

When sourcing from Al Mina Marble & Granite Trading LLC, request a mill test report that confirms compressive strength, water absorption and surface hardness for each slab type. Verify that the engineered quartz product meets ASTM C615 requirements and that any artificial marble complies with EN 1469. Obtain a detailed product sheet listing slab dimensions, thickness options, finish type and HS code to ensure correct customs classification.

Ask for three representative samples - one polished, one honed and one brushed - to assess visual consistency and edge quality before placing a larger order. Confirm the supplier’s packaging method (film‑wrapped pallets with corner protectors) and inquire about the maximum number of slabs per 20‑ft container to plan logistics. Typical minimum order quantities range from five to ten slabs, with lead times of four to six weeks after order confirmation, subject to stock availability and any required pre‑shipment inspections.

What stone categories does Al Mina Marble & Granite Trading LLC offer?

The supplier lists engineered quartz (Statuario Quartz), natural granite (Bianco Diamante), natural marble variants (e.g., Calacatta Roma, Grigio Diamante) and artificial marble products such as Bottochino and Rosso Levanto.

Which HS codes apply to the listed products?

Statuario Quartz is classified under HS 6810.99. The natural marble and granite items fall under the broader HS 6810 family, typically HS 6810.90‑99 for natural stone and artificial stone respectively.

What standard specifications should buyers verify for the quartz slab?

Buyers should check compliance with ASTM C615, which requires a minimum flexural strength of 100 MPa, water absorption below 0.1 % and consistent colour matching across the batch.

Are certifications such as ISO 9001 required?

While the supplier’s specific certifications are not listed, buyers commonly request ISO 9001 for quality management and product‑specific certificates (ASTM C615 for quartz, EN 1469 for artificial marble) before finalising a purchase.

What are typical slab dimensions and thicknesses?

Standard slabs are offered in lengths up to 3 m, widths up to 1.5 m and thicknesses of 20 mm, 25 mm or 30 mm, matching common industry dimensions for flooring and countertop applications.

How are the slabs packaged for export?

Slabs are wrapped in protective film, stacked on wooden pallets with corner protectors, and secured for shipment in 20‑ft or 40‑ft containers, usually 12‑14 slabs per 40‑ft container depending on thickness.

What is the usual lead time and minimum order quantity?

Lead times are typically four to six weeks after order confirmation. Minimum order quantities generally start at five slabs, though larger projects may require consolidated container loads.

Which markets commonly import stone from the United Arab Emirates?

Key import markets include European countries (Italy, Spain, Germany), GCC states, South Asian nations (India, Pakistan) and North American buyers, all of which source natural and engineered stone for construction and interior design projects.