Import Automotive Parts Mould — Buy in Bulk from Supplier in China
Similar Products
- Tungsten Carbide Wire Drawing Dies
- Flat Tungsten Carbide Wire Drawing Dies
- Power Manual Tong Dies, Slip Inserts And Jaws
- Manual Tong Dies Jaws Slip Inserts
- Die Collar
- Mouldings
- Capitals
- Pilasters
- Capital Molding
- carving work
- Mould Online Width Adjustment and Taper Measurement
- Ornamented ceiling cornice moulding (240 x 14.4 x 6 cm)
Related Products
- MISSION TUBULOR BATTERY
- Compostable and biodegradable bags
- 15 KVA Servo Voltage Stabilizer Three Phase Air Cooled
- 15 KVA Servo Voltage Stabilizer Three Phase Air Cooled
- Third-Party Manufacturing
- Coconut Shell Activated Carbon 6x12 Mesh
- Coconut Shell Activated Carbon 4x8 Mesh
- Black Garbage Bags Medium 90 Pcs | 30 Pcs x Pack of 3 Rolls | 19 x 21 Inch | Dustbin Bags/Trash Bags/Dustbin Covers for Wet and Dry Waste
- Caluanie Oxidative parterization thermostat, Heavy water
- PET Monofilament
- Nylon Monofilament
- Tiger Nuts
Trending in this Category
Trending in Sub-Category
- Buchner Funnel
- Tempo Flexible Electric Pipe Heating Tape Low 80, 160, 230 Watt Temp 400C, Volt 230
- Tempo Silicon Electric Pipe Heating Tape Low 100, 200, 310 Watt Temp 180°C, Volt 230
- Tempo Flexible Electric Pipe Heating Tape High 310, 620, 930 Watt, Temp 400C
- NUTS AND BOLTS
- Nylon Cable Tie
- MS Slipon Flange
- Platform Hand Trolley 150Kgs
- DIY String hockey viral game
- DIY hydraulic maze STEM game
- Hydraulic Lift - Outdoor Home Elevator
- MAX400 Industrial Shredder Machine
Top Suppliers for this Product
Compare Other Sellers
- Shilajit Resin 20gm
- Shilajit Resin
- CAD DESIGNING AND MOULD FACILITY
- Insert
- Ceiling cornice molding
- OEM Rotational molds The kayak mold and boat mould
- Compression Moulding Press
- Engraving Components - Special Forming Components
- Bottom Pouring Set (Bp Set)
- ratchet dies threading kit
- Wiper Die
- Silicon Ice Cream Pop Molds
More Suppliers in Category
Related Products
- Ground Nuts
- MISSION TUBULOR BATTERY
- Buchner Funnel
- Compostable and biodegradable bags
- NON- WOVEN bag
- TOTE COTTON CARRY BAG
- 15 KVA Servo Voltage Stabilizer Three Phase Air Cooled
- 15 KVA Servo Voltage Stabilizer Three Phase Air Cooled
- Third-Party Manufacturing
- Plastic carry bags
- Compressed Air Blower - Preheating for Thermit Welding
- Non-Woven Bags
- Cotton/Canvas Bags
- tops
- Coconut Shell Activated Carbon 6x12 Mesh
- Coconut Shell Activated Carbon 4x8 Mesh
- Black Garbage Bags Medium 90 Pcs | 30 Pcs x Pack of 3 Rolls | 19 x 21 Inch | Dustbin Bags/Trash Bags/Dustbin Covers for Wet and Dry Waste
- Caluanie Oxidative parterization thermostat, Heavy water
- Tempo Flexible Electric Pipe Heating Tape Low 80, 160, 230 Watt Temp 400C, Volt 230
- Tempo Silicon Electric Pipe Heating Tape Low 100, 200, 310 Watt Temp 180°C, Volt 230
- Tempo Flexible Electric Pipe Heating Tape High 310, 620, 930 Watt, Temp 400C
- PET Monofilament
- Nylon Monofilament
- Tiger Nuts
- Camouflage Military Uniform Fabrics available for export by Buzzy Day Enterprises
- Military boots for men available for export
- LDPE and Triple Laminated Bags for Pharmaceutical Packaging
- Biomedical waste water treatment SYSEM BML- 6
- Fibc / Jumbo Bags / Bulk Bags / Super Sack
- NUTS AND BOLTS
- Nylon Cable Tie
- Ground nuts
- DOG WASTE BAGS
- COMPOSTABLE GARBAGE BAGS
- ENZO - Laser Welding & Soldering Machine
- Hydraulic Cylinder Parts
- MAX400 Industrial Shredder Machine
- MAX400 Industrial Shredder Machine
- Hydraulic Lift - Outdoor Home Elevator
- MS Slipon Flange
- Platform Hand Trolley 150Kgs
- R-PIN
- LINCH PIN
- BUCKET PINS
- HEX NUTS
- DIY hydraulic maze STEM game
- DIY String hockey viral game
- PIZZA OVEN PO-4
- DOUGH SHEETER DG-500X900
- Hemp Backpack Bag
- Hemp Backpack Bag
- Hemp Sling Bag
- Hemp Tote Bag
- Hemp Waist Bag
- PP Woven Sacks
- 3. Tractor Mounted Water Well Drilling Rig (DEW-TR-250 Combo)
- 4. Tractor Mounted Water Well Drilling Rig
- 5. Tractor Mounted Water Well Drilling Rig (DEW-TR-700 Combo)
- Washing Machine
- Water Heater
- Fully Automatic Peanut Processing Plant
- PP Danline Rope, 18mm White with Blue Tracer
- PP Baler Twine
- Hdpe Rope
- fibc jumbo bags
- Gastopkap
- Hot Air Oven
- Hydraulic power press , Double action power press
- Parts feeding+PC Visual software+robotic placement
- Conveyor+Visual Identity+Robotic grasping
- robotic parts feeding systems
- Readymade garments
- F1 thermal spray gun copper inlaid tungsten plasma nozzle and electrode with thread
- Spot, Seam, Projection Solder Machine Copper Tungsten Resistance Welding Electrode
- Copper Tungsten Electrode for Spot Welding Resistance Spot Welding Equipment
- Plasma Spray Nozzle and electrode of 9MB,7MB,3MB with Tungsten Insert for Thermal Spraying Gun
- 11MB Tungsten-Copper Plasma Spray Electrodes and Nozzles
- Dals
- Gunny Jute Bags
- 129 Electrode, Sg100-155 Copper Tungsten Plasma Spray Nozzle
- Sinplexpro 90, 180 and Triplexpro 200, 210 Plasma Spray Torch Anodes and Cathodes
- Customized Quartz Glass Frits Porous Glass Filter Plate Disc Quartz Sintered Filters high purity Silica
- Transparent Fused Silica Quartz Disc/Quartz Plate/Optical Quartz Glass with High Light Transmittance High Temperature Resistance
- Mountain Kingdom Drops
- PTFE LINED VALVES
- METAL VALVES
- LIQUIDIFIED NATURAL GAS (LNG)
- Tops
- Pneumatic Water Sander - SM209
- Belt Sander - SM601
- Ladder
- Gastopkap
- Environmentally Conscious Packaging: LDPE Zipper Bags Made in Vietnam
- LIQUIDIFIED NATURAL GAS
- Hot Air Oven
- Lever Clamp With Screw MTS-W001-2
- MT-1300 heavy-duty rack with trolley
- Automation Packing Machine
- MT-500 heavy duty rack
- Tumbler Screen
Top Verified Suppliers
- J-sil Trading Corporation · India
- Triray Labs Pvt. Ltd. · India
- Highborn International Company · China
- Textile Sourcing Services · Pakistan
- Charvi Overseas · India
- Karatsialis Bros & Co. · Greece
- Shining Plastic Industries Llc · United Arab Emirates
- Vaibhavii Fzco · United Arab Emirates
- Unipet Inc. · United States
- Tc Montagem Industrial Ltda · Brazil
- Dalieco Limited · China
- 2lians Pte. Ltd. · Singapore
- BMD Materials · Canada
- Thai Peace Pulp (Thailand) Co., Ltd · Thailand
- Goods Exim International · India
- BS International · India
- PT Delta Dunia Sandang Tekstil · Indonesia
- Agriculture Parts Pro Inc · United States
- 99 Gold Data Processing Trading Company Limited · Viet Nam
- W&e Holding B.v · Netherlands
- Rene Sadi · Canada
- Hind treders · India
- Capzol Industries Private Limited · India
- VALGES · Spain
- Anji Runxing New Materials Co., Ltd · China
- Atulit Impex Pvt. Ltd. · India
- Ability Exports · Pakistan
- Luxor International Pvt. Ltd. · India
- Prime Marketing · India
- Xiamen Zhanglong Import & Export Co., Ltd · China
Related Buy Leads
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›Agriculture›Apparel and fashion accessories›Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Automotive parts mould
Zhejiang Huangyan Huamei Mould Co., Ltd manufactures single-cavity automotive parts moulds in Taizhou, China, using polypropylene (PP) as the primary material. The mould features a 45# steel base and P20 cavity steel, designed for durability in high-volume production of plastic automotive components. The core steel is also 45# grade, ensuring strength and longevity.
Standard automotive moulds for PP parts typically operate at temperatures between 80 and 100 degrees Celsius, with cycle times varying based on part complexity. Moulds are often designed with standard ejection systems, cooling channels and venting to ensure consistent part quality and minimize defects such as sink marks or warpage.
These moulds are used to produce interior and exterior plastic components for the automotive sector, such as dashboards, trim panels and bumpers. Buyers source them for new model launches, replacement parts or aftermarket production. The supplier’s Taizhou facility supports efficient manufacturing, with packaging and shipping terms confirmed per order.
| Mould type | Single-cavity |
| Primary material | Polypropylene (PP) |
| Mould base material | 45# steel |
| Cavity steel | P20 |
| Core steel | 45# |
| Typical operating temperature | 80 - 100 °C typical |
| Typical cycle time | 30 - 90 seconds typical |
| Standard ejection system | Mechanical or hydraulic typical |
| Cooling method | Water channels typical |
| Application | Interior and exterior automotive plastic components |
Zhejiang Huangyan Huamei Mould Co., Ltd is based at No.1, Jingliu Rd., Western Industrial Zone, Taizhou, Zhejiang, China. The company specializes in manufacturing moulds for automotive plastic parts, with a focus on single-cavity designs using PP materials. Its product range targets the automotive industry’s demand for durable and precise plastic components.
The supplier holds a harbor trust tier and an imported supplier tier, but no response rate, average response time or certifications are declared. The profile does not list production capacity, client references or quality management systems, so buyers must verify these aspects independently before committing to an order.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Sourcing Automotive parts mould from Zhejiang Huangyan Huamei Mould Co., Ltd - China Import Guide
Before placing an order, confirm the mould’s compatibility with your injection molding machine by checking platen size, tonnage and clamping force requirements. Request a detailed drawing or 3D model to verify dimensions and cavity design. Ensure the supplier can provide material certificates for the steel used in the mould base and cavity.
Discuss Incoterms such as FOB Taizhou or CIF to your port, as these will determine responsibility for shipping costs and insurance. Payment terms, such as T/T or L/C, should also be agreed upon in advance. Clarify lead times for mould fabrication and delivery, as these can vary based on complexity and workload.
Upon delivery, inspect the mould for dimensional accuracy, surface finish and proper assembly of components like ejection pins and cooling channels. Conduct a trial run to validate part quality and cycle time. Request a maintenance and operation manual to ensure proper handling and longevity of the mould.
Active buying requirements from importers looking for Similar products
Oman
Egypt
Malaysia
China
India- ✓Who's importing it
- ✓What prices they're paying
- ✓Which ports they're moving through
Related Products & Suppliers
Compare alternatives, find similar products and connect with verified suppliers
Similar Products
Related Products
Trending in this Category
Trending in Sub-Category
Top Suppliers for this Product
Compare Other Sellers
More Suppliers in Category
Browse Automotive parts mould — Top Products
100 listingsTop Verified Suppliers for Automotive parts mould
30 suppliersBuy & Import Automotive Parts Mould — Wholesale Supply from China
Securing a reliable supply chain for Automotive Parts Mould is critical for maintaining your business operations. Zhejiang Huangyan Huamei Mould Co., Ltd, a verified supplier located in China, provides high-quality Automotive Parts Mould ready for international export. By connecting directly with this supplier, buyers can bypass intermediaries, negotiate custom wholesale pricing, and arrange bulk shipments. This product is a key offering within the Dies & Mouldings industry, catering to distributors, wholesalers, and importers worldwide.
Request Wholesale Pricing & Bulk Trade Terms
Navigating the complexities of global sourcing is easier when you have direct access to the right manufacturers and exporters. When importing Automotive Parts Mould from China, buyers can discuss shipping logistics, packaging requirements, and preferred payment terms directly with Zhejiang Huangyan Huamei Mould Co., Ltd. This seamless communication is powered by EximNext, a premier import export marketplace that connects ambitious buyers with verified global sellers across every major industry.
About Zhejiang Huangyan Huamei Mould Co., Ltd — Verified Supplier in China
We understand that verifying supplier credentials is a top priority for importers. Zhejiang Huangyan Huamei Mould Co., Ltd is part of our extensive network of vetted international exporters. Browse more products in the Dies & Mouldings category or discover new suppliers across the Dies & Mouldings sector. Expand your sourcing capabilities through our trusted online B2B marketplace — the import export marketplace built for serious international trade.
International Shipping & Import Guidelines for Automotive Parts Mould
When importing Automotive Parts Mould from China, buyers should consider shipping terms (FOB, CIF, EXW), customs documentation requirements, and payment security. Contact the supplier to discuss the best logistics options for your destination country.
Frequently Asked Questions About Automotive Parts Mould
How can I get the wholesale price for Automotive Parts Mould?
Click the "Request Quotation" button to contact Zhejiang Huangyan Huamei Mould Co., Ltd directly. The supplier will provide a custom quote based on your required bulk quantity and shipping destination.
Can I buy Automotive Parts Mould in bulk from China?
Yes, Zhejiang Huangyan Huamei Mould Co., Ltd provides Automotive Parts Mould for bulk export from China. You can negotiate the MOQ, packaging details, and shipping terms directly with the supplier.
What shipping terms are available for this product?
Shipping terms such as FOB, CIF, or EXW can be negotiated directly with Zhejiang Huangyan Huamei Mould Co., Ltd. Contact the supplier to discuss the best logistics options for importing Automotive Parts Mould to your country.
How do I request a sample of Automotive Parts Mould?
Send a direct message to Zhejiang Huangyan Huamei Mould Co., Ltd through our platform to request a product sample before committing to a large wholesale order.
Is it safe to source products from this supplier?
Zhejiang Huangyan Huamei Mould Co., Ltd is a registered and verified supplier on EximNext. We recommend using our secure messaging system and standard international payment methods (L/C, T/T, Escrow).
What specifications should I ask for when importing Automotive Parts Mould?
Request a detailed product data sheet including grade, purity, dimensions, material composition, and applicable industry standards from Zhejiang Huangyan Huamei Mould Co., Ltd.
Does Zhejiang Huangyan Huamei Mould Co., Ltd offer custom packaging or private labeling?
Many suppliers on EximNext, including Zhejiang Huangyan Huamei Mould Co., Ltd, offer custom packaging and private label options for bulk wholesale orders.
What payment methods are accepted for international orders?
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services.
Can I find more Dies & Mouldings suppliers on EximNext?
Yes, EximNext hosts a wide network of verified Dies & Mouldings manufacturers, exporters, and wholesalers across 200+ countries.
How do I contact Zhejiang Huangyan Huamei Mould Co., Ltd for a bulk trade inquiry?
Click "Request Quotation" or "Contact Supplier" on this page. Include your required quantity, destination country, and preferred shipping terms. All communications are managed securely through our import export marketplace.
Browse More Dies & Mouldings Products on EximNext
Discover more products in Dies & Mouldings from verified suppliers worldwide.