Import Alfa Laval Plate Heat Exchanger Gaskets Ts60 — Buy in wholesale FOB from Supplier in China

The TS60 is a larger-frame clip-on gasket in Alfa Laval's TS series, produced by M.C. Heat Exchanger in Wuxi for plate heat exchangers handling higher flow rates than the TS20 family. The gasket seats plates with nominal port diameters of 100-150 mm and is manufactured in EPDM, NBR or FKM compounds depending on duty. The TS60 designation denotes a heavy-duty configuration with reinforced clip geometry to maintain alignment across wider plate packs subject to greater thermal expansion. Plate material is typically AISI 316 or 304 stainless steel in the host exchanger, with the gasket selected to match the corrosion and temperature profile of the process fluid.

M.C. Heat Exchanger moulds the TS60 using multi-cavity compression tools with plate-insert alignment pins to maintain groove positional accuracy within plus or minus 0.4 mm. The EPDM compound is sulphur-cured with a typical specific gravity of 1.15-1.25 and an elongation at break above 200 percent per ISO 37. Colour coding follows industry convention, though buyers should specify if the installation requires particular identification schemes. The clip-on construction uses a dual-retention design with both upper and lower clip engagement to prevent gasket displacement during hydraulic shock or thermal transients. Groove depth is typically 3.0-4.0 mm with a land width of 5.0-6.0 mm, though these should be confirmed against the specific plate revision in service.

The TS60 serves chemical processing, power generation auxiliaries, and large-scale HVAC systems where the TS20 flow capacity is insufficient. Typical applications include district heating substations, refinery intercoolers, and desalination plant brine heaters. Buyers should confirm the plate corrugation type (single or double wall, chevron angle) when specifying gaskets, as groove geometry varies with plate generation. M.C. Heat Exchanger does not list stock availability or standard lead times for this model. Direct negotiation is required for batch size, with attention to shelf-life dating given elastomer ageing concerns.

M.C. Heat Exchanger is located at No.28 Xigang Road, Wuxi City, Jiangsu Province, China. The supplier's platform profile shows a Harbor trust tier but records zero response rate and zero average response hours, suggesting that inbound platform enquiries are not actively monitored. Buyers should not rely on platform messaging alone for time-sensitive procurement of TS60 gaskets. Direct email or telephone contact via the Wuxi address is the more reliable communication path.

The company positions itself as an aftermarket manufacturer of heat exchanger spare parts across numerous OEM brands, with an extensive cross-reference list including Alfa Laval, GEA, APV/SPX, Tranter, Sondex and SWEP. The profile does not disclose factory size, workforce, revenue, quality certifications, or client references. No information is provided about in-house testing capabilities, R&D staff, or export licence status. Buyers requiring supplier auditing should plan a site visit to Wuxi or engage a local inspection agency, as the available data does not substitute for first-party verification of manufacturing controls.