从Canada供应商批量进口Acrylonitrile-Styrene Copolymer

Acrylonitrile-styrene Copolymer (SAN) from BMD Materials is a rigid, transparent thermoplastic resin known for its clarity, chemical resistance, and dimensional stability. Unlike ABS, SAN does not contain butadiene, resulting in a material that is more resistant to UV degradation and yellowing over time. The copolymer is supplied in bulk, making it suitable for large-scale manufacturing operations.

SAN combines the strength and rigidity of acrylonitrile with the processability and transparency of styrene. It typically exhibits a tensile strength of 60 to 75 MPa, a flexural modulus of 3.0 to 3.5 GPa, and a typical heat deflection temperature of 95 to 105 °C at 1.8 MPa. The material is available in standard pellet form for injection moulding or extrusion, with typical melt flow rates ranging from 1.5 to 10 g/10 min.

This copolymer is widely used in the production of automotive components, consumer goods, and electronics housings, where its clarity and resistance to grease, oils, and cleaning agents are advantageous. Buyers in Canada often source SAN for applications requiring high gloss finishes or food-contact compliance. Trade terms such as CIF and FOB are commonly offered, with packaging designed to prevent moisture absorption during transit.

BMD Materials is a Canada-based supplier of thermoplastic resins, including acrylonitrile-styrene copolymer. The company operates under the imported supplier tier with a harbor trust tier, indicating it sources materials for distribution within Canada. While the listing does not provide specific details on response rates or lead times, buyers should directly confirm these metrics to ensure timely procurement.

The supplier focuses on providing bulk quantities of high-performance resins for industrial applications. Without additional information on certifications or production facilities, buyers are advised to request documentation such as material test reports or compliance certificates to verify the quality and suitability of the SAN copolymer for their intended use.