About Yigyooly Enterprise Limited - Chemicals & Allied Products Supplier in China

Yigyooly Enterprise Limited is based in China and currently lists five active chemical products. The catalogue is grouped under the broader categories of Chemicals & Allied Products, Hydrogen Peroxide, and Sodium Laureth Sulfate (SLES). The listed items include Sodium Fluoride, Sodium Percarbonate (granular form for detergents), Sodium Metasilicate Pentahydrate, a 50 % Hydrogen Peroxide solution, and Sodium Lauryl Ether Sulfate (SLES) at 70 % concentration. Each product is identified with its respective HS‑code where available, linking the items to the international customs classification system. The supplier’s trust tier is recorded as “harbor,” indicating a mid‑level verification status within the platform.

The Sodium Fluoride entry specifies industrial grade NaF with 98‑99 % purity and is classified under HS code 2826.19, a code used for inorganic fluorine compounds. Sodium Percarbonate is listed under HS code 2840.30, covering peroxides and peroxy‑hydrates used in cleaning formulations. Sodium Metasilicate Pentahydrate appears with HS code 2839.11, a code for silicates. The Hydrogen Peroxide and SLES items are presented without HS codes in the supplied data, but they fall under the typical HS chapters 2847 (hydrogen peroxide) and 3402 (surface‑active agents) respectively.

Product Range and Specialties of Yigyooly Enterprise Limited

The catalogue focuses on three inorganic salts and two surfactant‑based chemicals. Sodium Fluoride is offered at industrial grade with a purity range of 98‑99 %, a specification commonly required for water treatment and glass etching where ICUMSA‑type purity is not applicable. Sodium Percarbonate granules are supplied for detergent applications; the industry often expects a moisture content below 5 % and a bulk density around 0.8 t/m³. Sodium Metasilicate Pentahydrate is used as a builder in detergents and water‑treatment agents, typically supplied with a pH of 12‑13 in a solid form. The 50 % Hydrogen Peroxide solution is a standard bleaching and disinfection concentration, usually packaged in stainless‑steel drums with a stability period of 12 months at ambient temperature. SLES 70 % is a common anionic surfactant, generally supplied with a cloud point above 30 °C and a free‑fatty‑acid content below 0.5 %.

Industry practice for these chemicals includes grade designations such as “technical grade” for Sodium Fluoride, “detergent grade” for Sodium Percarbonate, and “industrial grade” for Sodium Metasilicate. Buyers often request certificates of analysis (CoA) that detail purity, moisture, and heavy‑metal limits, as well as safety data sheets (SDS) that meet REACH and GHS labeling requirements. For the surfactant SLES, specifications frequently reference the alkyl chain length distribution (e.g., C12‑C14) and the iodine value, while Hydrogen Peroxide shipments are checked for concentration accuracy and stabilizer content.

Trade and Export Information - Yigyooly Enterprise Limited

China is a major exporter of inorganic chemicals and surfactants, with shipments commonly directed to North America, the European Union, and Southeast Asian markets. HS code 2826.19 (Sodium Fluoride) and 2839.11 (Sodium Metasilicate) are often subject to customs inspections for purity and hazardous‑material compliance, while HS code 2840.30 (Sodium Percarbonate) may require declaration of oxidizing properties under the IMO Dangerous Goods Code. Typical certifications sought by importers include ISO 9001 quality‑management systems, REACH registration for the European market, and MSDS compliance. Export logistics frequently involve 20‑ft or 40‑ft containers with bulk pallets for solid chemicals, and stainless‑steel drums for liquid hydrogen peroxide, usually shipped under CIF or FOB terms. Chinese exporters also adhere to the Chinese Ministry of Commerce’s export licensing for chemicals classified as controlled substances, which can affect lead times.

Buyers of these product classes generally expect compliance with international standards such as ASTM D 1158 for Sodium Fluoride purity, ISO 9002 for detergent chemicals, and IEC 60884 for Hydrogen Peroxide handling. Packaging must meet UN 4.3 regulations for oxidizing substances, and bulk shipments often include moisture‑proof liners to maintain product integrity. Importers typically request a pre‑shipment sample batch, a full CoA, an SDS, and, where applicable, a REACH‑compliance declaration before finalizing the order. Verification of the supplier’s HS‑code declarations against the commercial invoice helps avoid customs delays.

Sourcing from Yigyooly Enterprise Limited - Buyer Guidance

When sourcing from Yigyooly Enterprise Limited, request a recent certificate of analysis for each chemical to confirm purity levels (e.g., 98‑99 % for Sodium Fluoride) and to verify moisture or oxidizer content for the solid products. Ask for a safety data sheet that complies with GHS labeling and includes transport classification, especially for the 50 % Hydrogen Peroxide and the peroxyhydrate. For the SLES product, request details on the alkyl chain distribution and the iodine value to ensure it matches the buyer’s formulation requirements.

Confirm that the supplier can provide compliance documents such as REACH registration (EU), TSCA inventory (US), or any other regional chemical registration that applies to the destination market. Verify packaging specifications - bulk drums for liquids, sealed polyethylene bags or fiber drums for powders - and ensure that the chosen Incoterm (e.g., CIF Shanghai) aligns with the buyer’s logistics plan. Finally, assess lead time estimates, which for Chinese chemical exporters typically range from 30 to 45 days from order confirmation, subject to customs clearance and any required export licensing.

What HS codes are associated with Yigyooly Enterprise Limited’s chemical products?

The catalogue lists HS code 2826.19 for Sodium Fluoride, 2840.30 for Sodium Percarbonate granules, and 2839.11 for Sodium Metasilicate Pentahydrate. Hydrogen Peroxide and SLES are not provided with HS codes in the data, but they fall under the typical HS chapters 2847 and 3402 respectively.

What purity levels does the supplier claim for Sodium Fluoride?

The Sodium Fluoride is described as industrial grade with a purity range of 98‑99 % by weight.

Which documentation should a buyer request before purchasing Hydrogen Peroxide 50 %?

Buyers should obtain a current safety data sheet, a certificate of analysis confirming the 50 % concentration, and any required REACH or local regulatory clearance for oxidizing liquids.

Are there any standard certifications that Yigyooly Enterprise Limited holds?

The supplied facts do not list any specific certifications held by the supplier. Buyers are advised to request copies of ISO 9001, REACH registration, or other relevant certificates as part of due diligence.

What are typical packaging formats for the listed solid chemicals?

Sodium Fluoride, Sodium Percarbonate, and Sodium Metasilicate are commonly shipped in sealed polyethylene bags or bulk fiber drums, often placed on pallets within a 20‑ft or 40‑ft container.

What is a common lead time for chemical shipments from China?

For Chinese chemical exporters, lead times generally range from 30 to 45 days after order confirmation, depending on production scheduling, export licensing, and customs clearance.

Which markets commonly import the types of chemicals Yigyooly offers?

Typical import destinations include North America, the European Union, and Southeast Asian countries, where these chemicals are used in water treatment, detergent manufacturing, and industrial cleaning applications.

What quality tests are usually required for Sodium Metasilicate Pentahydrate?

Buyers often request tests for moisture content (usually below 5 %), pH (12‑13), and bulk density, as well as a certificate of analysis that confirms the chemical composition against ISO 9002 detergent‑grade standards.