About Xuzhou Fenghe Intelligent Technology Co., Ltd. - Bearing Supplier in China

China hosts 13 active bearing product listings from Xuzhou Fenghe Intelligent Technology Co., Ltd. The catalogue covers a spectrum of bearing types including slewing ring bearings, deep‑groove radial bearings, four‑point contact ball bearings, angular contact bearings, single and double row tapered rollers, cylindrical rollers and spherical rollers. Each entry is linked to a specific HS‑code family, for example HS 8482.10 for ball bearings, HS 8482.20 for tapered rollers, HS 8482.40 for cylindrical rollers, HS 8482.50 for heavy‑equipment wear parts, HS 8482.60 for special cylindrical slewing bearings and HS 8483.40/8483.60 for slewing ring configurations.

The material data show a focus on high‑carbon chromium steels such as GCr15 (AISI 52100), alloy steels 42CrMo, 50Mn and case‑hardened variants, as well as stainless steel 440C for corrosion‑resistant applications. The HS‑code distribution spans 8482.10, 8482.20, 8482.40, 8482.50, 8482.60, 8483.40 and 8483.60, indicating that the supplier covers both standard ball bearing families (8482) and specialized slewing ring families (8483).

Product Range and Specialties of Xuzhou Fenghe Intelligent Technology Co., Ltd.

The listed products include Slewing Ring Bearings, Deep Groove Radial Slewing Bearings, Four Point Contact Ball Bearings, Superior Slewing Ring Bearings, Roller Bearing Wear Parts for heavy equipment, Angular Contact Bearings, Single Row Tapered Roller Bearings, Double Row Ball Type Slewing Bearings, Spherical Roller Slewing Bearings, Optimal Tapered Roller Slewing Bearings, quality Ball Slewing Bearings, Cylindrical Roller Bearings and Beneficial Cylindrical Slewing Bearings. In the bearing industry these items are commonly classified by ISO 15, 20, 30, 40, 60, 80 and 100 series for load capacity, and by ABEC 1‑9 or P5‑P9 tolerance grades for dimensional accuracy. Chrome steel GCr15 provides a typical hardness of 58‑62 HRC and is the baseline material for most precision ball bearings, while 42CrMo alloy steel is used where higher tensile strength and fatigue resistance are required for heavy‑duty slewing applications.

Typical specifications for the catalogue items include dynamic load ratings (C) ranging from 5 kN for small ball bearings up to 250 kN for large slewing rings, static load ratings (Co) up to 400 kN, bore diameters from 10 mm to 300 mm, and outer diameters up to 800 mm. Industry standards such as ISO 281 for bearing life calculation, ISO 15243 for performance testing and ISO 9001 quality management are frequently applied. Buyers often receive products packed in paperboard boxes for small units or wooden crates with moisture‑absorbing liners for larger slewing rings, allowing approximately 1 800‑2 200 units per 20 ft container depending on size.

Trade and Export Information - Xuzhou Fenghe Intelligent Technology Co., Ltd.

China is one of the world’s largest exporters of rolling-element bearings, supplying Europe, North America, Southeast Asia and the Middle East. HS chapter 84 (specifically 8482 and 8483) is the primary customs classification for ball, roller and slewing ring bearings, and importers usually request certificates of conformity to ISO 9001, ISO/TS 16949 for automotive applications, CE marking for EU markets and RoHS compliance for electronic‑equipment users. Pre‑shipment inspection by SGS, Bureau Veritas or similar agencies is a common requirement, especially for high‑value slewing rings used in crane or wind‑turbine installations.

Logistics for Chinese bearing exporters typically involve FOB Shanghai or Ningbo with container loads of 20 ft or 40 ft. A standard 20 ft container can accommodate roughly 1 500 to 2 000 medium‑size bearings, while a 40 ft container may hold up to 3 500 units. Import regulations often mandate a test report according to ISO 15243, a material certificate confirming GCr15 or 42CrMo composition, and, for stainless‑steel variants, a corrosion‑resistance test report. Buyers should verify that the HS code declared on the commercial invoice matches the product description to avoid customs delays.

Sourcing from Xuzhou Fenghe Intelligent Technology Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request a material test certificate that confirms the exact steel grade (e.g., GCr15, 42CrMo, 440C) and a dimensional inspection report that cites the tolerance class (P5‑P9 or ABEC rating). Ask for the bearing’s dynamic and static load ratings, rated speed (rpm) and any lubrication recommendations, as these parameters are essential for matching the bearing to the intended machinery.

Typical minimum order quantities range from 500 pieces for standard ball bearings to a full container load for large slewing rings, with lead times of 4‑8 weeks after order confirmation. Arrange a pre‑shipment inspection that covers visual quality, hardness testing and functional performance under load, and ensure that the packaging complies with ISO 9001 handling guidelines to protect against moisture and mechanical damage during transit.

What bearing steel grades are offered in the catalogue?

The catalogue lists chrome steel GCr15 (equivalent to AISI 52100), alloy steels 42CrMo and 50Mn, case‑hardened steel variants and stainless steel 440C for corrosion‑resistant applications.

Which HS codes correspond to the listed bearing types?

Ball bearing families use HS 8482.10, 8482.20, 8482.40, 8482.50 and 8482.60, while slewing ring and specialized roller bearings fall under HS 8483.40 and 8483.60.

What certifications should a buyer request from the supplier?

Buyers should request ISO 9001 quality‑management certification, a material test certificate for the specified steel grade, and a performance test report according to ISO 15243.

What are typical lead times and minimum order quantities?

Standard ball bearings usually have a minimum order of 500 pieces and a lead time of 4‑6 weeks; larger slewing ring bearings often require a full container load with a lead time of 6‑8 weeks.

How are the bearings packaged for export?

Small bearings are packed in reinforced paperboard boxes, while larger slewing rings are shipped in wooden crates with moisture‑absorbing liners, allowing roughly 1 800‑2 200 units per 20 ft container.

Which regions most commonly import these Chinese bearings?

Major import destinations include the European Union, the United States, Japan, South Korea, the United Arab Emirates and several Southeast Asian countries.

What documentation is needed for customs clearance?

Customs typically require a commercial invoice with the correct HS code, a packing list, the material test certificate, and, where applicable, CE or RoHS compliance certificates.

Can a buyer request a functional test sample before placing a large order?

Yes, it is common to request a functional sample that includes a load‑rating test report and dimensional verification to confirm compliance with the specified ISO standards.