About Xiamen Yinhua Stone Machinery Factory - Stone Cutting Machinery Supplier in China

Xiamen Yinhua Stone Machinery Factory is based in China and currently lists five active products in its catalogue. The portfolio focuses on stone‑processing equipment, covering gang saws, bridge saws, multi‑blade cutters, and gantry‑type machines. Each product is identified by a model code such as XMG‑80, YHQQJ‑36, Tgq‑160, Kld‑200/250/300 and Lmq‑180/220a. The catalogue does not provide HS codes, but the machines fall under the stone‑working machinery classification of HS Chapter 84, heading 8465. The supplier is classified as an imported tier with a harbor trust rating.

Product Range and Specialties of Xiamen Yinhua Stone Machinery Factory

The listed machines include the XMG‑80 Marble Gang Saw for horizontal slab cutting, the YHQQJ‑36 Infrared Fully Automatic Bridge Saw with sensor‑driven operation, the Tgq‑160 high‑efficiency multi‑blade cutter for rapid blade changes, the Kld‑200/250/300 series of bridge‑type large stone cutters with variable spans, and the Lmq‑180/220a gantry‑type cutter for vertical processing of thick blocks. In the stone‑machinery sector, buyers typically encounter cutting widths from 600 mm to 2000 mm, motor powers between 5 kW and 30 kW, blade speeds adjustable to 0‑500 rpm, and water‑cooling systems designed to keep blade temperature below 30 °C. Standard specifications also reference IEC 60204‑1 for electrical safety, CE marking for EU markets, and ISO 9001 for quality management. These parameters help align the Xiamen Yinhua models with the common grades and performance levels expected in marble, granite and engineered stone fabrication.

Trade and Export Information - Xiamen Yinhua Stone Machinery Factory

China is a major exporter of stone‑working machinery, and equipment classified under HS 8465 is routinely shipped to construction and stone‑fabrication hubs in the United States, the European Union, the Middle East and Southeast Asia. Importers usually require CE certification, a Declaration of Conformity and ISO 9001 evidence to satisfy customs and safety inspections. Packaging is typically a reinforced wooden crate with internal foam padding, loaded into 20‑ft or 40‑ft containers; a single gantry cutter can weigh over 2 tonnes, so freight is arranged as full‑container load (FCL) under FOB or CIF terms. Chinese stone‑machinery exporters often work with freight forwarders familiar with the dimension limits of HS 8465 items, and they provide pre‑shipment inspection reports upon buyer request.

Sourcing from Xiamen Yinhua Stone Machinery Factory - Buyer Guidance

When sourcing from Xiamen Yinhua, buyers should request the latest product data sheet, a CE Declaration of Conformity and a copy of the ISO 9001 certificate to verify compliance with international standards. Test reports covering cutting accuracy (typically ±0.5 mm), power consumption and noise levels are also standard documents that help assess suitability for a specific production line. Verifying the machine’s voltage compatibility (220 V/380 V) and confirming the availability of spare blade kits and after‑sales service contracts are practical steps before confirming an order. Requesting photographs of the crate, dimensions of the packaged unit and the planned loading plan can prevent logistical surprises during shipment.

What categories of stone cutting machines are listed by Xiamen Yinhua?

The catalogue includes a marble gang saw, an infrared fully automatic bridge saw, a high‑efficiency multi‑blade cutter, a bridge‑type large stone cutter series (Kld‑200/250/300) and a gantry‑type stone cutting machine (Lmq‑180/220a).

Which HS code segment generally covers the machines offered by this supplier?

Stone‑working machinery such as gang saws and bridge saws is classified under HS Chapter 84, heading 8465, which covers machinery for working stone, sand, gravel or other mineral ores.

What typical specifications should a buyer verify for the XMG‑80 Marble Gang Saw?

Buyers usually check the cutting width (up to 800 mm), motor power (approximately 7 - 10 kW), blade speed control range, water‑cooling capacity and compliance with CE safety directives. Additional parameters include power supply voltage (220 V/380 V) and machine footprint for floor planning.

Are any certifications commonly required for importing stone‑cutting equipment from China?

Importers generally request CE marking, an ISO 9001 quality‑management certificate and a test report confirming conformity with IEC 60204‑1 electrical safety standards. These documents are commonly inspected by customs authorities and end‑users.

What packaging and shipping methods are typical for these machines?

Machines are usually crated in reinforced wooden frames with internal foam padding, then loaded into 20‑ft or 40‑ft containers. Because each unit often exceeds 2 tonnes, freight is arranged as full‑container load (FCL) under FOB or CIF incoterms, with weight and dimension details listed on the packing list.

What are common lead times for production and delivery?

Standard lead times range from 30 to 60 days after order confirmation, depending on model complexity and any customisation such as blade size or control system options. Suppliers may adjust timelines for large‑scale orders or special engineering requests.

What documentation should a buyer request before finalising a purchase?

Buyers should obtain the full product catalogue, CE Declaration of Conformity, ISO 9001 certificate, test reports for cutting accuracy and power consumption, and a detailed packing list indicating container dimensions and weight. These documents help verify compliance and facilitate smooth customs clearance.