About Xi'an Hongtai I/E Co.,Ltd. - Cork Supplier in China

Xi'an Hongtai I/E Co.,Ltd. is located in Xi'an, China and currently lists five distinct cork‑based products in its catalogue. The active product count of 5 includes cork sheet, cork underlayment, soft board, cork granule and cork roll. Each item is described using the generic category names without additional branding. The supplier is classified as an imported tier with a harbor trust tier, indicating participation in cross‑border trade.

The catalogue focuses on raw and semi‑finished cork materials that are commonly used in construction, flooring, acoustic insulation and automotive applications. Products such as cork sheet and roll are supplied in continuous sheets or rolls of varying thickness, while cork granule is offered as bulk granules for agglomeration. Soft board appears as a lightweight panel that can serve as a substrate for decorative finishes.

Product Range and Specialties of Xi'an Hongtai I/E Co.,Ltd.

Cork sheet is typically produced in thicknesses from 2 mm to 10 mm, with densities ranging between 120 kg m‑3 and 200 kg m‑3 and moisture content below 1 %. Common grades are classified by compressibility and surface finish, with fine‑grade sheets used for flooring and coarse‑grade sheets for underlayment. Cork underlayment follows similar dimensions but is often supplied in panels of 1 m × 2 m for floor construction. Soft board, an engineered cork panel, is generally manufactured at 6 mm to 12 mm thickness with a uniform density around 150 kg m‑3, suitable for acoustic ceiling tiles. Cork granule is sold in bulk bags of 25 kg or 1 tonne, with particle size distribution typically 0.5 mm - 3 mm, used for manufacturing agglomerated cork products. Cork roll is provided in continuous rolls up to 5 m width and lengths up to 100 m, allowing custom cutting for automotive gaskets or wall coverings.

Industry standards for cork agglomerates reference EN 16516, which specifies dimensions, density and fire‑reaction performance. Buyers often request certifications such as FSC for sustainable sourcing, ISO 9001 quality management, and CE marking for building‑material compliance. Typical export packaging includes moisture‑resistant cardboard boxes for sheets and rolls, and bulk bags for granules, all loaded in 20‑foot or 40‑foot containers.

Trade and Export Information - Xi'an Hongtai I/E Co.,Ltd.

China ranks among the top exporters of cork products, supplying mainly to Europe, North America and Southeast Asia where construction and automotive sectors demand sustainable insulation materials. The HS chapter 40 (natural rubber and similar materials) frequently contains sub‑headings for cork agglomerates, and customs authorities often request a phytosanitary certificate to confirm the material is free of pests. Buyers usually arrange shipments on CIF or FOB terms, with container loads ranging from a single 20‑ft container for sheets to full 40‑ft containers for bulk granules.

Typical regulatory requirements include compliance with REACH for chemical safety and, where applicable, fire‑performance classification such as Euroclass B‑s1,d0. Export documentation commonly comprises commercial invoice, packing list, certificate of origin, and, when requested, a third‑party laboratory test report confirming density and moisture levels. Logistics providers handle the material as non‑hazardous, but pallets are often wrapped in stretch film to protect against moisture during sea transit.

Sourcing from Xi'an Hongtai I/E Co.,Ltd. - Buyer Guidance

When sourcing cork sheet or roll from this supplier, request a product data sheet that lists thickness, density, moisture content and surface finish. Samples cut to 300 mm × 300 mm are useful for verifying dimensional tolerances and compressibility. For cork granule, ask for a particle‑size analysis report and a bulk density test. Verify whether the supplier can provide FSC certification or a sustainability statement if that is required for your project.

Confirm that the supplier can issue a CE conformity declaration or an EN 16516 test report for fire‑performance if the material will be used in building interiors. Clarify the minimum order quantity, which for sheets and rolls often starts at one pallet (approximately 500 kg) and for granules at a 1‑tonne bulk bag. Lead times from order confirmation typically range from 15 to 30 days, depending on product form and packaging.

What dimensions are available for the cork sheet?

The supplier offers cork sheet in standard thicknesses from 2 mm to 10 mm and widths up to 1 m, with custom lengths up to 5 m upon request. Standard panel sizes such as 1 m × 2 m are also available for underlayment applications.

Is FSC certification available for the cork products?

The catalogue does not list any certifications; buyers should request an FSC or other sustainability certificate directly from the supplier before confirming the order. Documentation of sustainable sourcing is typically provided as a separate certificate.

What is the typical packaging for cork granule?

Cork granule is packed in moisture‑resistant bulk bags of 25 kg or 1 tonne, which are then placed on standard Euro pallets for container loading. The bags are sealed to prevent moisture ingress during transport.

What are the common quality tests for cork underlayment?

Standard tests include density measurement (kg m‑3), moisture content below 1 %, compression set at 25 % strain, and fire‑reaction classification according to EN 16516. Test reports are usually issued by an accredited laboratory.

Which Incoterms are usually used for shipments from China?

Export transactions commonly employ FOB (Free on Board) or CIF (Cost, Insurance, Freight) terms, allowing the buyer to select the preferred logistics arrangement. The chosen Incoterm determines responsibility for freight and insurance.

What is the minimum order quantity for cork roll?

The typical MOQ is one pallet, which can hold up to 500 kg of roll material, though larger quantities can be arranged for full container loads. Suppliers may adjust the MOQ based on custom width or length requirements.

How long does it take to receive a sample of soft board?

Sample preparation and dispatch usually require 5 to 10 business days, after which standard air freight delivers the item within 7 days to most international destinations. Samples are typically sent in a protective cardboard box to avoid damage.