About Taizhou City Huangyan Tianyi Mould Factory - Plastic Processing Machinery Supplier in China

Taizhou City Huangyan Tianyi Mould Factory is located in the Huangyan district of Taizhou City, China and currently lists five active products. The catalogue focuses on moulds used in plastic injection processes, specifically an axial fan injection mould, a professional plastic chair mould, a high‑quality centrifugal fan mould, a plastic injection air‑conditioner mould, and a high‑quality injection pallet mould. Each entry falls under the broader classification of plastic processing machinery, which is recorded in the international HS‑84 chapter for machine tools and equipment. The supplier’s product count of five reflects a narrowly defined but specialized offering within this machinery segment.

The five moulds are described using industry‑standard terminology such as “injection mould”, “centrifugal fan”, and “pallet”. They are intended for high‑volume plastic parts that are produced by melt‑injection techniques. No additional product categories or services are listed beyond these mould designs, and the supplier does not claim any certifications or additional capabilities in the provided facts.

Product Range and Specialties of Taizhou City Huangyan Tianyi Mould Factory

The catalogue’s moulds are typical of the plastic processing machinery sector, where tool steel grades such as P20, H13, or stainless‑steel S136 are commonly used for durability and heat resistance. Standard tolerances for cavity dimensions are usually within ±0.02 mm, and cooling channel designs aim for a temperature drop of 30‑40 °C to maintain cycle times under 30 seconds for medium‑size parts. For example, an axial fan mould may accommodate blade diameters up to 500 mm, while a chair mould is often sized for polypropylene chair shells ranging from 150 mm to 250 mm in height. Centrifugal fan and air‑conditioner moulds typically require larger cavity volumes and may include multi‑cavity configurations to achieve production rates of several thousand units per day. Pallet moulds are generally designed for polyethylene or polypropylene pallets with load capacities of 500 kg to 1 t per pallet, and they often include ejector pins and slide mechanisms to release complex geometries. These specifications represent the common engineering parameters buyers evaluate when sourcing moulds for injection‑molding lines.

Trade and Export Information - Taizhou City Huangyan Tianyi Mould Factory

China is one of the world’s largest exporters of plastic processing machinery, and products such as injection moulds are classified under HS chapter 84, sub‑heading 84.71 for “machinery for working rubber or plastics or for the manufacture of plastic articles”. Export shipments from China typically use 20‑foot or 40‑foot containers packed in wooden crates with protective padding to prevent deformation of the mould components. Major import regions include Southeast Asia, the European Union, and North America, where automotive, consumer‑goods, and packaging manufacturers rely on these moulds for high‑volume production. Buyers commonly require certifications such as CE marking for the EU market, ISO 9001 for quality‑management compliance, and ISO 14001 for environmental management. Inspection regimes often involve pre‑shipment verification by third‑party agencies, and Incoterms such as FOB Shanghai or CIF Los Angeles are frequently applied in contracts for this category.

Sourcing from Taizhou City Huangyan Tianyi Mould Factory - Buyer Guidance

When evaluating a mould supplier, buyers should request detailed CAD drawings, material certificates for the tool steel, and a performance test report that includes cycle time, cooling efficiency, and dimensional accuracy. Confirmation of ISO 9001 or equivalent quality‑management certification is advisable, even though the supplier’s specific certifications are not listed in the provided facts. Buyers should also verify the mould’s cavity count, projected production capacity, and any required ancillary equipment such as cooling plates or ejector systems before placing an order. Standard minimum order quantities for custom moulds are typically a single mould, with lead times ranging from 30 to 60 days depending on complexity and material selection.

What types of moulds does Taizhou City Huangyan Tianyi Mould Factory list in its catalogue?

The catalogue includes a plastic axial fan injection mould, a professional plastic chair mould, a high‑quality centrifugal fan mould, a plastic injection air‑conditioner mould, and a high‑quality injection pallet mould.

Which HS code family do these moulds belong to?

Moulds for plastic injection are generally classified under HS chapter 84, sub‑heading 84.71, which covers machinery for working rubber or plastics.

What material grades are typically used for the moulds listed?

Industry practice uses high‑grade tool steels such as P20, H13, or stainless‑steel S136 to provide wear resistance and thermal stability during injection cycles.

What documentation should a buyer request before purchasing?

Buyers should ask for CAD drawings, material certificates for the tool steel, a test report showing cycle time and dimensional accuracy, and any applicable quality‑management certificates such as ISO 9001.

Are there common certifications required for importing these moulds?

Importers often require CE marking for EU shipments and ISO 9001 or ISO 14001 certification to demonstrate compliance with quality and environmental standards.

What are typical packaging and shipping methods for these moulds?

Moulds are usually packed in wooden crates with foam or cardboard inserts, loaded into 20‑foot or 40‑foot containers, and shipped under Incoterms such as FOB Shanghai or CIF Los Angeles.

What lead time can a buyer expect for a custom mould from this supplier?

Lead times for custom injection moulds commonly range from 30 to 60 days, depending on the complexity of the cavity design and the chosen material grade.

Is there a minimum order quantity for the moulds listed?

The standard minimum order quantity for custom moulds is typically one mould, allowing buyers to start with a single design before scaling up production.