About SYNERGY BONDING SOLUTIONS PVT LTD - Adhesives Supplier in India

Based in Pune, Maharashtra, India, SYNERGY BONDING SOLUTIONS PVT LTD lists eight active adhesive products. The catalogue focuses on wood‑adhesive and furniture‑grade formulations, each identified with a specific internal HS‑code label such as POLY_SPL, POLY_D3, POLY_WP, POLY_EB, POLY_MP, POLY_SPRAY, POLY_HTX and POLY_HM. The product names include Polygum Special Purpose Adhesive, Polygum D3+ Adhesive, Polygum Waterproof Adhesive, Polygum Extrabonding Adhesive, Polygum Multipurpose Adhesive, Polygum Sprayable Adhesive, Polygum Heatproof SR Adhesive and Polygum Hot Melt Adhesive. All items are classified under the material description “Wood Adhesive/ Furniture Grade Adhesive”.

The range covers adhesives for general woodworking, moisture‑resistant bonding, high‑temperature applications, spray‑able formulations and hot‑melt systems. In addition to wood‑working, the supplier mentions industrial uses such as lamination, pressure‑sensitive adhesives (PSA), side‑pasting, polysol, paper‑tube and fiber‑drum bonding. The catalogue does not list any certifications, so buyers should verify compliance with relevant standards for each adhesive type.

Product Range and Specialties of SYNERGY BONDING SOLUTIONS PVT LTD

The eight Polygum products span typical wood‑adhesive categories used worldwide. In the industry, special‑purpose adhesives are often polyurethane or melamine‑based with shear strength of 8‑12 MPa and VOC limits below 150 g L‑1, while waterproof variants add water‑resistance ratings such as 24 h immersion at 30 °C. Multipurpose and extrabonding adhesives commonly meet EN 204 or ASTM D‑2559 specifications, and sprayable adhesives are formulated for low viscosity (≈200 cPs) to enable atomisation. Heat‑proof SR adhesives are usually formulated for service temperatures up to 120 °C, and hot‑melt grades are supplied as granules or pellets with melt flow indexes that support rapid setting in 30‑60 seconds. Buyers typically compare these grades against standard test methods (e.g., ASTM D‑2559, EN 12670) to ensure suitability for furniture, cabinetry or industrial lamination applications.

Trade and Export Information - SYNERGY BONDING SOLUTIONS PVT LTD

Indian adhesive manufacturers primarily export under HS Chapter 35, code 3506 which covers organic surface‑active agents and polymer dispersions used in adhesives. Major import destinations for Indian wood‑adhesives include the European Union, the United States, the Middle East and Southeast Asian markets, where construction, furniture and automotive interiors drive demand. Export shipments are usually packed in steel drums (20 L or 200 L) or bulk containers, with CIF or FOB terms common in B2B contracts. Buyers often request ISO 9001 quality‑management certification, REACH compliance documentation and VOC analysis reports; additional certifications such as FSC or CARB may be required for environmentally sensitive markets. Indian exporters also follow standard customs procedures, providing Commercial Invoices, Packing Lists and Certificate of Origin to satisfy destination customs and phytosanitary inspections.

Sourcing from SYNERGY BONDING SOLUTIONS PVT LTD - Buyer Guidance

When sourcing from SYNERGY BONDING SOLUTIONS PVT LTD, request the latest Technical Data Sheet and Safety Data Sheet for each Polygum formulation. Verify that the supplier can provide test reports aligned with ASTM D‑2559 (shear strength), EN 204 (bond strength) or EN 12670 (hot‑melt performance) and confirm VOC content, cure time and temperature range. Ask for a small production sample (1‑2 L) before confirming larger volumes, and clarify the minimum order quantity, which typically ranges from 500 kg to 1 ton per product. Confirm packaging details, such as drum size and pallet configuration, and ensure that export documents include any certifications required by your target market.

What types of adhesives does SYNERGY BONDING SOLUTIONS PVT LTD offer?

The supplier lists eight wood‑adhesive products, including Special Purpose, D3+, Waterproof, Extrabonding, Multipurpose, Sprayable, Heat‑proof SR and Hot‑melt formulations, each identified with a custom HS‑code label.

Which HS‑code families are used for these adhesives?

The catalogue assigns internal HS‑code tags such as POLY_SPL, POLY_D3, POLY_WP, POLY_EB, POLY_MP, POLY_SPRAY, POLY_HTX and POLY_HM to the respective Polygum adhesive types.

What certifications should a buyer request for these wood adhesives?

Buyers typically ask for ISO 9001 quality‑management certification, REACH compliance, VOC analysis reports, and product‑specific test reports such as ASTM D‑2559 for shear strength or EN 204 for bond strength.

What are the common packaging formats for wood‑adhesive products from India?

Exporters usually ship adhesives in steel drums of 20 L or 200 L capacity, in bulk containers or 40‑ft containers with inner pallets, depending on order volume and product type.

What is a typical minimum order quantity for these adhesives?

Most Indian adhesive suppliers set MOQs between 500 kg and 1 ton per product, although exact quantities depend on the specific formulation and chosen packaging size.

What lead time can a buyer expect for an initial order?

Lead times of 4 - 6 weeks are common for production, quality testing and documentation of wood‑adhesive batches, with additional time required for export clearance.

Which markets commonly import Indian wood adhesives?

Key import regions include the European Union, the United States, the Middle East and Southeast Asian countries, where furniture manufacturing and construction sectors require high‑performance adhesives.

How should a buyer verify the performance of a Polygum adhesive before full purchase?

Request a technical data sheet, safety data sheet and a sample for laboratory testing under relevant standards such as ASTM D‑2559 (shear strength) or EN 12670 (hot‑melt performance) to confirm cure time, temperature resistance and VOC levels.