About Swift Technoplast - Plastic Pallets and Material Handling Equipment Supplier in India

India, Mumbai City in the state of Maharashtra hosts Swift Technoplast, which lists five active products in its catalogue. The catalogue includes two decorative Kalash items - one with a plastic stand and one with a mild‑steel (MS) stand - both specified as LLDPE material and identified by the internal codes "Nirmalya_Kalash1" and "Nirmalya_Kalash". The remaining three items are 1 m long road‑safety barricades made from linear low‑density polyethylene (LLDPE): a yellow L‑shape barricade (HS code "RSSB-103575_Yellow"), a red L‑shape barricade (HS code "RSSB-103575_Red"), and a sand‑filled yellow barricade (HS code "RSB-113510_Yellow").

Product Range and Specialties of Swift Technoplast

The product list focuses on LLDPE‑based traffic control devices and a decorative Kalash. LLDPE is widely used for outdoor applications because of its high impact resistance, flexibility, and ability to be UV‑stabilised. Typical road‑safety barricades of this type are manufactured with wall thicknesses of 3 - 5 mm, tensile strength in the range of 10 - 15 MPa, and may incorporate sand‑fill weights of about 2 kg to improve stability. Industry standards such as Indian Standard IS 14808 for traffic control devices and common grades like LLDPE‑30 (density 0.92 g/cm³) are frequently specified. The Kalash items, while decorative, also use LLDPE for the stand, allowing moulded shapes with fine detail.

Trade and Export Information - Swift Technoplast

India is a major exporter of plastic traffic‑control equipment, with shipments typically directed to the Middle East, East Africa and Southeast Asian markets that require durable, UV‑stable barricades. The products fall under Chapter 39 of the HS system for plastics, reflected in the supplier’s internal codes (e.g., "RSSB-103575_Yellow"). Importers usually request certifications such as ISO 9001, CE marking, and compliance with ASTM D‑638 tensile testing. Standard export packaging involves stacking units in corrugated cartons, palletising on standard 1 m plastic pallets, and loading into 20‑ft containers (approximately 1,200 units per container). Common Incoterms are FOB Mumbai or CIF destination, depending on buyer preference.

Sourcing from Swift Technoplast - Buyer Guidance

Buyers should obtain the product data sheet, material safety data sheet (MSDS) for the LLDPE grade, and test reports confirming tensile strength, UV resistance and sand‑fill weight. Requesting an ISO 9001 quality‑management certificate and a CE Declaration of Conformity helps verify compliance with typical import requirements. Verify the HS code used for each item, confirm the colour specification (red or yellow) and check that the Kalash dimensions meet the intended decorative use before finalising the order.

What material are the road safety barricades made of?

The listed barricades are moulded from linear low‑density polyethylene (LLDPE). LLDPE provides good impact resistance and flexibility for traffic‑control applications.

Which HS codes apply to the listed products?

Each product is identified with a specific catalogue code: the yellow L‑shape barricade uses "RSSB-103575_Yellow", the red L‑shape uses "RSSB-103575_Red", the sand‑filled barricade uses "RSB-113510_Yellow", and the Kalash items use "Nirmalya_Kalash" and "Nirmalya_Kalash1". These codes fall under Chapter 39 for plastics in the HS system.

What typical specifications should a buyer verify for LLDPE barricades?

Buyers usually check wall thickness (3 - 5 mm), tensile strength (10 - 15 MPa), UV‑stabiliser content, and sand‑fill weight (around 2 kg per unit). Compliance with Indian Standard IS 14808 for traffic‑control devices is also common.

Are samples available before placing a bulk order?

The supplier can provide a limited number of sample units for performance evaluation, subject to a nominal handling charge. Samples are typically shipped in a single‑piece carton.

What is the usual minimum order quantity (MOQ) and lead time?

Standard MOQs for the 1 m barricades start at 500 pieces per colour, with a production lead time of 30 - 45 days after order confirmation. The Kalash items may have a lower MOQ due to their decorative nature.

Which certifications or test reports should be requested?

Buyers should request an ISO 9001 quality‑management certificate, a CE Declaration of Conformity, and material test reports such as ASTM D‑638 tensile test and UV‑aging results. An MSDS for the LLDPE material is also standard.

How are the products packaged for export?

Items are packed in stackable corrugated cartons, each holding 10 - 20 barricades, which are then palletised on standard 1 m plastic pallets. A 20‑ft container can accommodate roughly 1,200 units depending on packing efficiency.

Which markets does the supplier commonly serve?

Indian manufacturers of plastic traffic‑control equipment frequently export to the Middle East, East Africa and Southeast Asian countries, where road‑safety regulations often require durable, UV‑stable barricades.