About Suka Surveying Ltd. - Surveying Equipment Supplier in Indonesia

Indonesia hosts Suka Surveying Ltd., which currently lists five distinct surveying instruments in its catalogue. The product lineup includes the Sokkia SHC2500 data collector, the Sokkia 28X digital level SDL50, the Sokkia GIR1600 differential GPS receiver operating at 1 Hz, the Leica GPS 1200 base RTK smart rover station, and the Ashtech ProMark 800 GNSS receiver. Each item falls under the HS chapter 90 for optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments. The catalogue focuses on electronic surveying hardware used for land measurement, construction staking, and geodetic positioning.

The five entries cover both handheld data acquisition devices and high‑precision GNSS and RTK stations. The Sokkia SHC2500 is a field data collector typically paired with total stations, while the Sokkia 28X digital level provides sub‑millimetre repeatability for leveling tasks. The Sokkia GIR1600 and Ashtech ProMark 800 are GNSS receivers capable of centimetre‑level RTK positioning, and the Leica GPS 1200 serves as a base station for network‑RTK applications. The catalogue does not list any ancillary accessories such as tripods or batteries.

Product Range and Specialties of Suka Surveying Ltd.

Surveying equipment listed by Suka Surveying Ltd. spans handheld data collectors, digital levels, and GNSS/RTK receivers. In the industry, data collectors such as the Sokkia SHC2500 are expected to support at least 12‑bit ADC resolution, Bluetooth or USB data transfer, and battery life of 8 hours. Digital levels like the Sokkia 28X normally meet ISO 17123‑2 with a repeatability of 0.1 mm and a resolution of 0.01 mm. GNSS receivers such as the GIR1600 and ProMark 800 are commonly specified for L1/L2 carrier‑phase tracking, RTK update rates of 1 Hz or higher, and a positional accuracy of 1 - 2 cm + 1 ppm. RTK base stations, exemplified by the Leica GPS 1200, are usually required to provide a stable reference signal, support network protocols (e.g., RTCM 3.x), and operate with power supplies suitable for continuous field deployment.

Trade and Export Information - Suka Surveying Ltd.

Indonesia exports surveying instruments primarily to construction and infrastructure markets in Southeast Asia, the Middle East, and Africa. The relevant HS code families are 9021  -  Surveying, hydrographic, oceanographic, hydrological equipment, and 9030  -  Measuring and testing instruments, which are subject to customs duty rates ranging from 0 % to 5 % under ASEAN trade agreements. Buyers typically request CE marking, ISO 9001 quality management certification, and, where applicable, FCC or IC certification for radio frequency components.

Logistics for these electronic devices usually involve 20‑ft or 40‑ft containers with anti‑static packaging, moisture‑absorbing packs, and sturdy wooden crates. Common Incoterms are FOB Indonesian ports such as Jakarta or Surabaya, with buyers arranging CIF to their destination ports. Importers must also comply with local calibration and metrology regulations, and may need to submit type‑approval certificates to national standards bodies.

Sourcing from Suka Surveying Ltd. - Buyer Guidance

When sourcing from Suka Surveying Ltd., buyers should request the latest type‑approval certificates, CE declaration of conformity, and calibration reports for each instrument. Verification of firmware version, battery health, and optional accessories (e.g., tripods, data cables) helps ensure compatibility with existing survey workflows. Typical minimum order quantities for electronic surveying hardware are one unit per model, with lead times of 4 - 6 weeks for stocked items and 8 - 12 weeks for items requiring configuration or firmware updates.

What product categories does Suka Surveying Ltd. offer?

The catalogue lists five surveying instruments: a Sokkia SHC2500 field data collector, a Sokkia 28X digital level (SDL50), a Sokkia GIR1600 differential GPS receiver (1 Hz), a Leica GPS 1200 base RTK smart rover station, and an Ashtech ProMark 800 GNSS receiver. These items belong to the broader category of surveying and geodetic measurement equipment.

Which HS codes apply to the listed products?

The instruments fall under HS chapter 90, specifically HS 9021 for surveying and hydrographic equipment and HS 9030 for measuring and testing instruments. Importers should reference these codes when filing customs declarations.

What certifications are typically required for these surveying devices?

Buyers usually request CE marking and ISO 9001 quality‑management certification to confirm conformity with European and international standards. For GNSS units, FCC or IC radio‑frequency approval is also commonly required.

What are the typical accuracy specifications for the GNSS receivers in the catalogue?

The Sokkia GIR1600 and Ashtech ProMark 800 are generally specified for RTK positioning accuracy of 1 - 2 cm + 1 ppm. They support carrier‑phase tracking on L1/L2 frequencies and provide update rates of at least 1 Hz.

How are the products packaged for international shipment?

Items are packed in anti‑static foam or bubble wrap, placed in sturdy wooden crates, and loaded into 20‑ft or 40‑ft containers with moisture‑absorbing packs to protect electronic components. This packaging helps prevent static discharge and humidity damage during transit.

What Incoterms are commonly used for exporting these instruments from Indonesia?

Exporters often use FOB from Indonesian ports such as Jakarta or Surabaya, allowing buyers to arrange their own freight. Buyers may also request CIF terms if they prefer the seller to handle freight and insurance to the destination port.

What documentation should a buyer obtain before finalizing a purchase?

Buyers should obtain the CE declaration of conformity, ISO 9001 certificate, calibration report, and, for GNSS units, the FCC/IC radio‑type approval documentation. These documents verify compliance with safety, quality, and electromagnetic standards.